- A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender.
- Jog Motions can be entered using a keyboard, or entered using Teach Mode
- Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.
- The existence of a Jog Motion in the CNC Bender user interface is completely configurable.
- You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.
- You can even rename the Jog Motion name (or translate the motion to another language).
|
Three Jog Motions in a Custom Command
|