Difference between revisions of "Modicon Momentum"

From ATTWiki
Jump to: navigation, search
(I2T IFC220E Servo Modules)
(I2T IFC220E Servo Modules)
Line 14: Line 14:
 
==I2T IFC220E Servo Modules==
 
==I2T IFC220E Servo Modules==
  
The I2T (Pronounced "I Square T") servo modules use the same package form as the other Modicon products.  They contain a computer that can control 2 axes.
+
The I2T (Pronounced "I Square T") servo modules use the same package form as the other Modicon products.  The base unit contains a computer that can control 2 axes.
  
 
<table>
 
<table>

Revision as of 12:39, 23 December 2009

Tsxmomentum ethernet communications adapter1.jpg

Contents


About the Modicon Momemtum Package

This the form of the modules that are installed to machines that use our CNC Bender software. The different modules come in a variety of functions - but the same packaging. For example, the image above shows an INPUT base with 32-points with an Ethernet Communications Adapter clipped on the top.

See this data sheet (16 pages) for an overview of these modules.

View the Modicon Momentum I/O Base User Guide (662 pages).

They mount to DIN rails in electrical panels.

I2T IFC220E Servo Modules

The I2T (Pronounced "I Square T") servo modules use the same package form as the other Modicon products. The base unit contains a computer that can control 2 axes.

This is the form for the I2T servo modules with an Ethernet Communications Adapter on the top. You can see a slight difference on the base from the INPUT module with the RJ-45 receptacle.

Momentum.jpg

In the I2T servo modules, the serial port is an RJ-45 receptacle port shown in this image. INPUT and OUTPUT modules don't include this port.

Momentum serial port.jpg

INPUT Base with Ethernet Communication Adapter

The Ethernet Communications Adapter holds the IP address for this base, and receives the Ethernet cable from a switch or a hub. Each bender is its own small Class C network with addresses like 192.168.0.201, 192.168.0.202, etc.

Tsxmomentum ethernet communications adapter2.jpg

BACK of Modicon Momentum I/O Base

This is the back of the base with a channel for receiving a DIN rail.

Tsxmomentum back.jpg

Other Pages