Difference between revisions of "Benderlink Ethernet Module Cable Reference"

Revision as of 18:34, 5 September 2009

Cable	Description
Spec 34	From CB-EL1 port EL (J3 in rev 1) to Amp circular female bulkheard connector.
RJ-45 to RJ-45	From RS-232D port to Spec 35 connector
Spec 35	RJ-45 to DB 9 Connector - attach to the QUATECH

@@ Line 1: / Line 1: @@
 {| border="0" cellpadding="10" cellspacing="0" align="none" width=500
 |-
-! style="background:#b3b0c8;" | Bender
+! style="background:#b3b0c8;" | Cable
 ! colspan="2" style="background:#acbcce;" | Description
 |-
-| VECTOR Simulation Current Loop
+| Spec 34
-| Port: J3 or EL to circular female bulkheard - Cable Spec 34
+| From CB-EL1 port EL (J3 in rev 1) to Amp circular female bulkheard connector.
 |-
-| PREMIER Simulation Current Loop
+| RJ-45 to RJ-45
-| Port: J3 or EL to circular female bulkheard - Cable Spec 33
+| From RS-232D port to Spec 35 connector
 |-
-| ROMER to Eaton Leonard
+| Spec 35
-| Add a module to any Eaton Leonard bender and make it wireless.
+| RJ-45 to DB 9 Connector - attach to the QUATECH
-|-
-| CHIYODA
-| Add this module to a Chiyoda to allow it to communicate over the network from its RS-232 port.
-|-
-| KEINS
-| Add this module to a KEINS to allow it to communicate over the network from its RS-232 port.
-|-
-| MiiC
-| Works with a MiiC to place it on the network (See [[Benderlink for MiiC]])
 |}