VTube HERBER Bender Correction (MES Protocol) - Revision history

Mcone: /* STEP 2: Setup the Benderlink Network Grid for HERBER MES Protocol */

2018-07-05T20:38:31Z

‎STEP 2: Setup the Benderlink Network Grid for HERBER MES Protocol

2018-07-05T16:39:58Z

‎STEP 9 - IMPORT the Correction Data at the HERBER Control

2018-07-05T16:39:32Z

‎STEP 9 - IMPORT the Correction Data at the HERBER Control

2018-07-05T16:38:23Z

‎STEP 10 - REPEAT STEPS 1 THROUGH 9

2018-07-05T16:37:41Z

‎STEP 9 - IMPORT the Correction Data at the HERBER Control

2018-07-05T16:37:13Z

‎STEP 9 - IMPORT the Correction Data at the HERBER Control

2018-07-05T16:36:20Z

‎STEP 9 - IMPORT the Correction Data at the HERBER Control

2018-07-05T16:31:59Z

‎STEP 9 - IMPORT the Correction Data at the HERBER Control

2018-07-05T16:23:07Z

‎STEP 9 - IMPORT the Correction Data at the UNISON Control

2018-07-05T16:21:02Z

‎STEP 8 - The SEND to BENDER Complete Window

@@ Line 79: / Line 79: @@
 #Choose an unused row in the grid for a new HERBER bender setup.<br><br>
 #Assign a bender name that will help operators identify which bender this is.  This text will be displayed at the top of the Bender Setup menu.<br><br>
-#Assign the HERBER MES protocol.<br><br>
+#Assign the HERBER MES+SOL protocol.<br><br>
 #Enter the path to the shared drive or folder in the NetPath field. This path should point to the HERBER folder that will receive MES files from VTube. (The value shown on the screen is only an example.)<br><br>
 #Enter the IP address in the PING IP ADDRESS field if it is a fixed field. (This is not required. It allows VTube to ping the address to see if the network location is active before trying to open communications.)<br><br>

@@ Line 209: / Line 209: @@
 <td width=500>
 Move to the HERBER control and follow these steps:<br><br>
-* Click on “Read measurement from machine” in the Communications menu.
+* Click on “Read measurement from machine” in the Communications menu.<br><br>
 * Select your measuring system (VTube).
 </td>

@@ Line 219: / Line 219: @@
 <tr valign=top>
 <td width=500>
-* Select the .MES file VTube-LASER just created. When you click OK, the HERBER software will ask if you want to delete the MES file after importing.
+* Select the .MES file VTube-LASER just created. When you click OK, the HERBER software will ask if you want to delete the MES file after importing.<br><br>
 * To apply all corrections from the mes file, click on “Save all measurements” and continue bending. You are not required to stop the machine to do this. The HERBER cell allows for correction in an automated production cell in realtime. The corrections will be applied for the next part bent.

@@ Line 248: / Line 248: @@
 Bend the corrected tube starting in Step 1, then measure it again (Step 2) and follow the rest of the steps until the part is within tolerance.
 <td>
-[[image:UNISON User Programming Control.png|400px]]
+[[image:HERBER Control Station.png|200px]] [[image:herber bender large tube bending.png|400px]]
 </td>
 </tr>

@@ Line 213: / Line 213: @@
 </td>
 <td>
-[[image:HERBERScreen1.png|400px]]<br>
+[[image:HERBERScreen1.png|500px]]<br>
 </td>
 </tr>
@@ Line 224: / Line 224: @@
 </td>
 <td>
-[[image:HERBERScreen2.png|400px]]<br>
+[[image:HERBERScreen2.png|500px]]<br>
 </td>
@@ Line 235: / Line 235: @@
 </td>
 <td>
-[[image:HERBERScreen3.png|400px]]<br>
+[[image:HERBERScreen3.png|500px]]<br>
 </td>

@@ Line 209: / Line 209: @@
 <td width=500>
 Move to the HERBER control and follow these steps:<br><br>
-# Click on “Read measurement from machine” in the Communications menu.
+* Click on “Read measurement from machine” in the Communications menu.
-# Select your measuring system (VTube)
+* Select your measuring system (VTube).
-# Select the .MES file VTube-LASER just created. When you click OK, the HERBER software will ask if you want to delete the MES file after importing.
-# To apply all corrections from the mes file, click on “Save all measurements” and continue bending. You are not required to stop the machine to do this. The HERBER cell allows for correction in an automated production cell in realtime. The corrections will be applied for the next part bent.
-# It is also possible to delete or save individual correction values by marking a bend and opening the measure tab.
-−
 </td>
 <td>
 [[image:HERBERScreen1.png|300px]]<br>
 [[image:HERBERScreen2.png|300px]]<br>
 [[image:HERBERScreen3.png|300px]]<br>
 </td>
 </tr>
 </table>

← Older revision		Revision as of 16:23, 5 July 2018
Line 202:		Line 202:
	</table>		</table>

−	===STEP 9 - IMPORT the Correction Data at the ~~UNISON~~ Control===	+	===STEP 9 - IMPORT the Correction Data at the HERBER Control===

@@ Line 197: / Line 197: @@
 You can allow this window to close on its own in a few seconds, or press the close button to close it immediately.
 <td>
-[[image:VTube-LASER UNISON Send Adjusted Complete.png|400px]]<br><br>
+[[image:vtl_v2.9.10 HERBER Send Adjusted Complete.png|400px]]<br><br>
 </td>
 </tr>