Benderlink for Crown Version 3.1 - Revision history

Mcone: /* PROTOCOL CHANGE */

2007-09-10T22:05:52Z

‎PROTOCOL CHANGE

Mcone: /* PROTOCOL CHANGE */

2007-09-10T22:04:44Z

‎PROTOCOL CHANGE

Mcone: /* PROTOCOL CHANGE */

2007-09-10T22:01:55Z

‎PROTOCOL CHANGE

Mcone: /* PROTOCOL CHANGE */

2007-09-10T22:00:54Z

‎PROTOCOL CHANGE

Mcone at 22:00, 10 September 2007

2007-09-10T22:00:37Z

Mcone at 21:41, 10 September 2007

2007-09-10T21:41:34Z

Mcone at 21:40, 10 September 2007

2007-09-10T21:40:15Z

Mcone at 21:39, 10 September 2007

2007-09-10T21:39:08Z

Mcone: /* From 3.0 to 3.1 - INTERFACE CHANGE */

2007-09-10T21:36:26Z

‎From 3.0 to 3.1 - INTERFACE CHANGE

Mcone: /* From 3.0 to 3.1 - INTERFACE CHANGE */

2007-09-10T21:34:13Z

‎From 3.0 to 3.1 - INTERFACE CHANGE

@@ Line 9: / Line 9: @@
 ====PROTOCOL CHANGE====
 The major change between the two packages is that the protocol has changed from [[ATT Protocol]] to the Premier protocol.
 <br><br>
 Because of the changes to Windows version of [[Laservision]], the [[ATT Protocol]] no longer functions properly in the [[Laservision]] software.  This version of the Benderlink for Crown is required for communication to Windows-based [[Laservision]] measuring centers.
 <br><br>
-[[image:EL_Laservision_Tube_Data_Center.jpg|200px|thumb|Eaton Leonard Vector Tube Data Center]]
 ''Because we have changed to the Premier protocol, this change effectively allows any Crown bender to communicate with any Laservision or ROMER measuring center in the world without update or modification to the measuring center.  It is no longer necessary to purchase the Competitive Bender Interface option for the Laservision.''

@@ Line 13: / Line 13: @@
 Because of the changes to Windows version of [[Laservision]], the [[ATT Protocol]] no longer functions properly in the [[Laservision]] software.  This version of the Benderlink for Crown is required for communication to Windows-based [[Laservision]] measuring centers.
 <br><br>
 ''Because we have changed to the Premier protocol, this change effectively allows any Crown bender to communicate with any Laservision or ROMER measuring center in the world without update or modification to the measuring center.  It is no longer necessary to purchase the Competitive Bender Interface option for the Laservision.''

@@ Line 11: / Line 11: @@
 The major change between the two packages is that the protocol has changed from [[ATT Protocol]] to the Premier protocol.
 <br><br>
-Because of the changes to Windows version of [[Laservision]], the [[ATT Protocol]] no longer functions properly.  This version of the Benderlink for Crown is required for communication to Windows-based [[Laservision]] measuring centers.
+Because of the changes to Windows version of [[Laservision]], the [[ATT Protocol]] no longer functions properly in the [[Laservision]] software.  This version of the Benderlink for Crown is required for communication to Windows-based [[Laservision]] measuring centers.
 <br><br>
 ''Because we have changed to the Premier protocol, this change effectively allows any Crown bender to communicate with any Laservision or ROMER measuring center in the world without update or modification to the measuring center.  It is no longer necessary to purchase the Competitive Bender Interface option for the Laservision.''

@@ Line 13: / Line 13: @@
 Because of the changes to Windows version of [[Laservision]], the [[ATT Protocol]] no longer functions properly.  This version of the Benderlink for Crown is required for communication to Windows-based [[Laservision]] measuring centers.
 <br><br>
-Because we have changed to the Premier protocol, this change effectively allows any Crown bender to communicate with any Laservision or ROMER measuring center in the world without update or modification to the measuring center.  It is no longer necessary to purchase the Competitive Bender Interface option for the Laservision.
+''Because we have changed to the Premier protocol, this change effectively allows any Crown bender to communicate with any Laservision or ROMER measuring center in the world without update or modification to the measuring center.  It is no longer necessary to purchase the Competitive Bender Interface option for the Laservision.''
 ====INTERFACE CHANGE====

@@ Line 8: / Line 8: @@
 ===From 2.2 to 3.1 - MAJOR VERSION CHANGE===
 The major change between the two packages is that the protocol has changed from [[ATT Protocol]] to the Premier protocol.
 <br><br>
 Because of the changes to Windows version of [[Laservision]], the [[ATT Protocol]] no longer functions properly.  This version of the Benderlink for Crown is required for communication to Windows-based [[Laservision]] measuring centers.
 <br><br>
 Also, the interface was updated with a new skinned look.  New buttons were added (Set Part Number, Recall from Crown, Monitor for [[Laservision]], and Clear the Cache)

@@ Line 3: / Line 3: @@
-This version of Benderlink for Crown is designed to make Crown benders simulate Eaton Leonard Premier controls.
+This version of [[Benderlink for Crown]] is designed to make Crown benders simulate Eaton Leonard Premier controls.
 ===From 2.2 to 3.1 - MAJOR VERSION CHANGE===
-The major change between the two packages is that the protocol has changed from ATT protocol to the Premier protocol.
+The major change between the two packages is that the protocol has changed from [[ATT Protocol]] to the Premier protocol.
 <br><br>
-Because of the changes to Windows version of Laservision, the ATT protocol no longer functions properly.  This version of the Benderlink for Crown is required for communication to Windows-based Laservision measuring centers.
+Because of the changes to Windows version of [[Laservision]], the [[ATT Protocol]] no longer functions properly.  This version of the Benderlink for Crown is required for communication to Windows-based [[Laservision]] measuring centers.
 <br><br>
-Also, the interface was updated with a new skinned look.  New buttons were added (Set Part Number, Recall from Crown, Monitor for Laservision, and Clear the Cache)
+Also, the interface was updated with a new skinned look.  New buttons were added (Set Part Number, Recall from Crown, Monitor for [[Laservision]], and Clear the Cache)
 ===From 3.0 to 3.1 - INTERFACE CHANGE===
-Slight adjustments were made to the interface in order to aid operators in understanding that this version of Benderlink requires that the operator press the Recall from Crown button before performing a correction loop at the Laservision.  This is the message that the operator now sees with this version:
+Slight adjustments were made to the interface in order to aid operators in understanding that this version of Benderlink requires that the operator press the Recall from Crown button before performing a correction loop at the [[Laservision]].  This is the message that the operator now sees with this version:
 [[image:Blinkcrown_recallnote.jpg|600px]]

← Older revision		Revision as of 21:40, 10 September 2007
Line 4:		Line 4:

	This version of Benderlink for Crown is designed to make Crown benders simulate Eaton Leonard Premier controls.		This version of Benderlink for Crown is designed to make Crown benders simulate Eaton Leonard Premier controls.
−
−	~~See this web page for more information:~~
−	~~http://www.advancedtubular.com/blink_crowneb.htm~~


Line 29:		Line 26:

	The Premier simulation code is adjusted to allow for more robust reception of data being sent from the Laservision. The issue is one of timing - as the legacy Premier protocol is very specific in its requirements regarding control-line hand-shaking.		The Premier simulation code is adjusted to allow for more robust reception of data being sent from the Laservision. The issue is one of timing - as the legacy Premier protocol is very specific in its requirements regarding control-line hand-shaking.
		+
		+
		+	===External Reference===
		+
		+	See this web page for more information:
		+	http://www.advancedtubular.com/blink_crowneb.htm

@@ Line 1: / Line 1: @@
 [[image:Crownbender.jpg|right]]
-[[image:Blinkcrown_v3_1.jpg|300px]]
+[[image:Blinkcrown_v3_1.jpg|400px]]
 This version of Benderlink for Crown is designed to make Crown benders simulate Eaton Leonard Premier controls.
 See this web page for more information:
 http://www.advancedtubular.com/blink_crowneb.htm
 ===From 3.0 to 3.1 - INTERFACE CHANGE===
 Slight adjustments were made to the interface in order to aid operators in understanding that this version of Benderlink requires that the operator press the Recall from Crown button before performing a correction loop at the Laservision.  This is the message that the operator now sees with this version:

← Older revision		Revision as of 21:36, 10 September 2007
Line 17:		Line 17:

	[[image:Blinkcrown_recallnote.jpg\|600px]]		[[image:Blinkcrown_recallnote.jpg\|600px]]
		+
		+
		+
		+	===From 3.0 to 3.1 - COMMUNICATIONS CHANGE===
		+
		+	The Premier simulation code is adjusted to allow for more robust reception of data being sent from the Laservision. The issue is one of timing - as the legacy Premier protocol is very specific in its requirements regarding control-line hand-shaking.

← Older revision		Revision as of 21:34, 10 September 2007
Line 16:		Line 16:
	Slight adjustments were made to the interface in order to aid operators in understanding that this version of Benderlink requires that the operator press the Recall from Crown button before performing a correction loop at the Laservision. This is the message that the operator now sees with this version:		Slight adjustments were made to the interface in order to aid operators in understanding that this version of Benderlink requires that the operator press the Recall from Crown button before performing a correction loop at the Laservision. This is the message that the operator now sees with this version:

−	[[image:Blinkcrown_recallnote.jpg\|~~400px~~]]	+	[[image:Blinkcrown_recallnote.jpg\|600px]]