http://www.advancedtubular.wiki/api.php?action=feedcontributions&user=Mcone&feedformat=atomATTWiki - User contributions [en]2024-03-28T10:08:03ZUser contributionsMediaWiki 1.21.1http://www.advancedtubular.wiki/index.php/VTube_Communications_With_Transfluid_BendersVTube Communications With Transfluid Benders2023-07-20T16:33:04Z<p>Mcone: </p>
<hr />
<div>This page has been moved to our new HelpSite [https://advancedtubular.helpsite.com/articles/110267-vtube-communications-with-a-transfluid-bender#standard-network-connection Navigate to HelpSite]</div>Mconehttp://www.advancedtubular.wiki/index.php/VTube_Communications_With_Transfluid_BendersVTube Communications With Transfluid Benders2023-07-20T16:32:49Z<p>Mcone: </p>
<hr />
<div>'This page has been moved to our new HelpSite' [https://advancedtubular.helpsite.com/articles/110267-vtube-communications-with-a-transfluid-bender#standard-network-connection Navigate to HelpSite]</div>Mconehttp://www.advancedtubular.wiki/index.php/VTube_Communications_With_Transfluid_BendersVTube Communications With Transfluid Benders2023-07-20T16:32:09Z<p>Mcone: Replaced content with "[https://advancedtubular.helpsite.com/articles/110267-vtube-communications-with-a-transfluid-bender#standard-network-connection Navigate to HelpSite]"</p>
<hr />
<div>[https://advancedtubular.helpsite.com/articles/110267-vtube-communications-with-a-transfluid-bender#standard-network-connection Navigate to HelpSite]</div>Mconehttp://www.advancedtubular.wiki/index.php/VTube_Communications_With_Transfluid_BendersVTube Communications With Transfluid Benders2023-07-20T16:31:14Z<p>Mcone: /* Standard Network Connection */</p>
<hr />
<div>[[image:VTube-LASER_TransfluidSplash.png|800px]]<br><br><br />
<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
As of version 3.0 build 456 (March 29, 2021), we've embedded the Transfluid SVNET protocol in VTube-STEP and VTube-LASER.<br><br><br />
This page describes the use of the VTube-LASER and VTube-STEP to Transfluid bender communications.<br><br><br />
<br><br><br />
<br />
</td><br />
<td width=500><br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
<br />
=Video=<br />
====Video 20210330: VTube-LASER to Transfluid Bender Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to communicate with Transfluid tProject bender software.<br />
<br />
<td width=200><br />
[[image:20210330_TransfluidTProjectCommunications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_transfluid_tproject_communications.mp4 MP4]<br />
* View [https://vimeo.com/531073455 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
__TOC__<br />
<br />
=Configuring VTube-STEP and VTube-LASER for Communications with Transfluid tProject=<br />
<br />
You can perform this setup from VTube-STEP or VTube-LASER. The steps are identical in both.<br><br><br />
<br />
===STEP 1: Enter the SYSTEM OPTIONS Menu in VTube===<br />
<br />
<table width=1000><br />
<tr valign=top><br />
<td width=500><br />
<br />
#Load VTube.<br><br><br />
#Click on Systems Options in the toolbar at the top of the screen.<br><br><br />
#Enter the Measure 2 tab menu.<br><br><br />
#Enter the Setup Benderlink Network menu.<br><br><br />
</td><br />
<td width=300><br />
[[image:VTube System Options Benderlink Network Button.png|500px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
===STEP 2: Setup the Benderlink Network Grid for Transfluid Supravision Network Protocol===<br />
<table cellpadding=10 width=1000><br />
<tr valign=top><br />
<td width=500><br />
#Choose an unused row in the grid for a new Transfluid bender setup.<br><br><br />
#Assign a bender name that will help operators identify which bender this is. This text will be displayed at the top of the Bender Setup menu.<br><br><br />
#Assign the Transflud SVNET protocol. (Note: This is not the same as the "Transfluid" protocol. Be sure that "SVNET" follows Transfluid in the protocol name.)<br><br><br />
#Enter the path to the shared drive or folder in the NetPath field. This path should point to the Transfluid tProject folder that will receive command files from VTube. (The value shown on the screen is only an example.)<br><br><br />
#Enter the IP address in the PING IP ADDRESS field if it is a fixed field. (This is not required. It allows VTube to ping the address to see if the network location is active before trying to open communications.)<br><br><br />
#In our tests, the Transfluid data rotates <b>positive</b> in the same direction as VTube. However, if this changes on your system, then you can select YES in both the CW Rotation Positive at Export and the CW Rotation Positive at Export cells. (Compare models with the same data on both systems to be sure that they are not creating mirror-images.) (See [[Bender Rotation Directions]])<br><br><br />
#The "Ignore Incoming Linear Unit" setting is optional. This will not allow the Transfluid tProject program to change the linear units in VTube-LASER if they are different.<br><br><br />
#Press Close to save the settings. VTube will save these values to a persistent configuration file that will not change unless you change them in this grid.<br />
<br />
</td><br />
<td width=300><br />
[[image:Benderlink Network Transfluid SVNET.png|500px]]<br><br><br />
[[image:Benderlink Network Transfluid SVNET2.png|500px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br><br><br />
<br><br><br />
<br />
=Configuring Transfluid tProject for Communications with VTube-LASER and VTube-STEP=<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
[[image:transfluid_big_bender.png|300px]]<br><br>Follow these steps in Transfluid tProject to set up communications for VTube-LASER and VTube-STEP.<br><br><br />
</td><br />
<td width=300><br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====STEP 1: Enter Options Window====<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
Click on the blue button wrench/screwdriver button in the upper right corner of the user interface.<br />
</td><br />
<td width=300><br />
[[image:TransfluidtProjectStartingCleared_ClickConfigButton.png|500px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
====STEP 2: Enter the Import/Export Tab====<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
Click on the Import/Export tab.<br />
</td><br />
<td width=300><br />
[[image:TransfluidtProject_ImportExportTab.png|500px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
====STEP 3: Set the Import Box Settings====<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
Enter the set up data in the Import box.<br><br><br />
<br />
*Pulldown box: Romer/HEXAGON (.$$$)<br />
*Radio Button: Import corrected LRA (clra)<br />
*Checkbox: Enable Supra Vision (SV) communications<br />
*Exchange Director: Program a shared network path (consult your IT department for this setting)<br />
*Bender Number: Each bender number should have a unique number in the Supravision protocol.<br />
*Timeout: 10 seconds is high enough. (tProject is very quick for communications. Lower timeouts may be ok too.)<br />
<br><br><br />
Note: This protocol allows for both automatic import and export. It is only necessary, however, to change the settings inside the "Import" section. You can ignore the rest of the settings on this page.<br />
</td><br />
<td width=300><br />
[[image:TransfluidtProject_ImportBox.png|500px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
====STEP 4: Check for a Green LED in the Main User Interface====<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
Close the options menu with the OK button and check for the Supravision communications LED in the lower right corner of tProject. The LED should be green.<br><br><br />
</td><br />
<td width=300><br />
[[image:TransfluidtProject_SupravisionLED.png|500px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br><br><br />
<br />
=How to Prepare tProject to Receive New Data from VTube=<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
[[image:transfluid_big_bender.png|300px]] The Transfuild tProject program can receive data for a part that has never been sent to it before from VTube-STEP.<br />
<br />
===STEP 1: Clear the tProject Project===<br />
===STEP 2: DO NOT Enter a Project Name===<br />
This allows VTube to control the new incoming name.<br />
===STEP 3: Click on OK===<br />
<br />
</td><br />
<td width=300><br />
[[image:TransfluildClear1.png|500px]]<br><br><br />
[[image:TransfluildClear2.png|500px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br><br><br />
<br />
=How to Send New Data to tProject from VTube-STEP=<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
The Transfuild tProject program can receive data for a part that has never been sent to it before from VTube-STEP. This allows a user to import a solid model of any tube, then send it to tProject.<br />
<br />
===STEP 1: Import the Model===<br />
Import the part using standard VTube-STEP procedures<br />
===STEP 2: Bender Output Menu===<br />
Click on the Bender Output button in the navigation pane.<br />
===STEP 3: Bender Number===<br />
Select the bender number for the Transfluid bender.<br />
===STEP 4: Send===<br />
Click Send to Bender. VTube will show "Send to Bender Complete" if it was able to save the output data for Transfluid.<br />
</td><br />
<td width=300><br />
[[image:VTube-STEP_TransfluildSend.png|700px]]<br><br><br />
[[image:VTube-STEP_TransfluildSend_Dialog.png|700px]]<br><br><br />
</td><br />
</tr><br />
</table><br />
<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
===STEP 5: tProject Will Update===<br />
[[image:transfluid_big_bender.png|300px]] tProject will display the new part immediately.<br />
<br />
===STEP 6: Save the tProject Project===<br />
It is important to save the new tProject project file using the disk button on the left. tProject does not automatically save the incoming data to disk.<br />
</td><br />
<td width=300><br />
[[image:Transfluid_ReceivedNewData.png|700px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
<br><br><br />
<br />
<br />
=How to Prepare tProject for Bender Corrections from VTube-LASER=<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
[[image:transfluid_big_bender.png|300px]] The Transfuild tProject program can receive correction data for an existing part from VTube-LASER. Follow these steps to set up tProject to receive corrections.<br />
<br />
===Load an existing tProject Project===<br />
The project to correct must be loaded to tProject memory, and must also exist as a tProject .tfp file. <br />
<br />
(When tProject answers VTube-LASER requests for data, it always gives the data currently in the tfp file - not the data on the screen.)<br />
<br />
</td><br />
<td width=300><br />
[[image:TransfluildLoadedProject.png|700px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br><br><br />
<br />
=How to Set Up the VTube-LASER Project for Bender Corrections to tProject=<br />
<table width=1000><br />
<br />
===STEP 1: Load the VTube-LASER Project File===<br />
<tr valign=top><br />
<td width=300><br />
The project must have a Part Number that is identical to the project file name in tProject. <br />
</td><br />
<td width=300><br />
[[image:VTube-LASER_TransfluidLoadedProject.png|700px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
===STEP 2: Enter the Bender Setup Menu===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
This menu allows you to communicate with any bender in the VTube-LASER network.<br />
<br><br><br />
Be sure the bender protocol says "Transfluid SVNET". If it does not, then select the correct bender number at the top.<br />
</td><br />
<td width=300><br />
[[image:VTube-LASER_Transfluid_BenderSetup1.png|700px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
===STEP 3: Bring Data Into This Window===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
If there is now data in the window like shown in the previous image, then click on "Copy the Master Part Setup Values into these fields" button.<br />
<br><br><br />
This will put the correct Part Number in the menu before we attempt to RECALL data.<br />
</td><br />
<td width=300><br />
[[image:VTube-LASER_Transfluid_BenderSetup_CopyMasterPartSetup.png|700px]]<br><br><br />
[[image:VTube-LASER_Transfluid_BenderSetup_CopyMasterPartSetup2.png|700px]]<br><br><br />
</td><br />
</tr><br />
</table><br />
<br />
===STEP 4: Click on Correct the Bender===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
Find and click on the "Correct the Bender" button in the lower right corner.<br />
<br><br><br />
</td><br />
<td width=300><br />
[[image:VTube-LASER_Transfluid_BenderSetup_CorrectBenderButton.png|700px]]<br><br><br />
</td><br />
</tr><br />
</table><br />
<br />
===STEP 5: RECALL Bender Data===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
Press the RECALL LRA from BENDER button.<br />
<br><br><br />
</td><br />
<td width=300><br />
[[image:VTube-LASER_Transfluid_BenderSetup_RECALLLRA.png|700px]]<br><br><br />
</td><br />
</tr><br />
<tr valign=top><br />
<td width=300><br />
The RECALL window with a timer will display. Allow tProject to answer VTube-LASER.<br />
<br><br><br />
</td><br />
<td width=300><br />
[[image:VTube-LASER_Transfluid_BenderSetup_RECALLLRA2.png|700px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br><br><br />
<br />
===STEP 6: Allow VTube-LASER to Configure===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
If the incoming bend count does not match what is currently in VTube-LASER, then VTube-LASER will ask you for some decisions like this one. Just Press "USE..." to let the incoming data takeover the page.<br />
<br><br><br />
</td><br />
<td width=300><br />
[[image:VTube-LASER_Transfluid_BenderSetup_BendCountMismatch.png|700px]]<br><br><br />
</td><br />
</tr><br />
</table><br />
<br />
===STEP 7: Bender Setup is Complete===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
The Bender Setup window is completely ready. This setup will be stored with the project from this point on. Press "Close this Window", bend, measure, and align the tube in VTube-LASER, then come back into this Bender Setup menu if the part is not within tolerance.<br />
<br><br><br />
</td><br />
<td width=300><br />
[[image:VTube-LASER_Transfluid_AlignedPartSimulation.png|700px]]<br><br><br />
</td><br />
</tr><br />
</table><br />
<br />
<br><br><br />
<br />
=How to Send Corrections tProject Data with VTube-LASER Bender Setup=<br />
<table width=1000><br />
<br />
===STEP 1: Measure and Align the Part in VTube-LASER===<br />
<tr valign=top><br />
<td width=300><br />
During measurement, VTube-LASER will automatically create correction data that will be transferred to Bender Setup.<br />
</td><br />
<td width=300><br />
[[image:VTube-LASER_TransfluidAlignment.png|700px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
===STEP 2: Enter the Bender Setup Menu===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
The white columns will show Adjustments that can be applied to the bender.<br><br><br />
The blue columns show the before-correction values.<br />
The orange columns show the after-correction values.<br />
</td><br />
<td width=300><br />
[[image:VTube-LASER_Transfluid_BenderSetup_PostMeasure.png|700px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
===STEP 3: RECALL then SEND===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
To be sure that the Blue columns have the latest data as was programmed by the bender operator at the Transfluid, press the RECALL LRA from BENDER button.<br><br><br />
After the RECALL is complete, press the SEND to send the ORANGE columns data to the bender.<br />
</td><br />
<td width=300><br />
[[image:VTube-LASER_Transfluid_BenderSetup_RECALLSENDexisting.png|700px]]<br><br><br />
</td><br />
</tr><br />
</table><br />
<br />
===STEP 4: tProject Will Receive Data and Ask for Confirmation===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
[[image:transfluid_big_bender.png|300px]]<br />
tProject will receive the data immediately if the part number is correct. Since data is on the screen in tProject, it will ask for confirmation before allowing the data to import.<br><br><br />
Click on YES to import the data.<br />
<br><br><br />
</td><br />
<td width=300><br />
[[image:Transfluid_DataIncomingConfirmation.png|700px]]<br><br><br />
</td><br />
</tr><br />
</table><br />
<br />
===STEP 5: SAVE the tProject Project File===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
[[image:transfluid_big_bender.png|300px]]<br />
Press the SAVE disk to save the tProject changes.<br />
<br><br><br />
</td><br />
<td width=300><br />
[[image:Transfluid_tProject_Save.png|700px]]<br><br><br />
[[image:Transfluid_tProject_Save2.png|700px]]<br><br><br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
<br><br><br />
<br />
=Rules for tProject Communication=<br />
<br />
Here are helpful rules for tProject communication.<br />
<br />
[[image:transfluid_big_bender.png|300px]]<br />
<br />
===Rule 1 - tProject Automatically Converts Linear Units===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
tProject will always automatically convert the incoming data to the linear unit that is being displayed on the screen.<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
===Rule 2 - tProject Will Block the Wrong Part===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
Unless the project is cleared without a part name, tProject will always block any data it receives that has the wrong VTube-LASER part number.<br><br><br />
<b>The tProject name and the VTube-LASER Part Number must match when data is being sent from VTube-LASER during corrections.</b><br />
</td><br />
<td width=300><br />
[[image:tProject_BlockTransmission.png|700px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Rule 3 - tProject Answers Recalls with the Data in tProject Files===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
tProject always answers VTube-LASER RECALLS with the project data in the disk file - NOT the project data on the screen.<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
===Rule 4 - tProject Does Not Answer A VTube-LASER Recall When the Part Does Not Exist===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
If tProject does not answer a VTube-LASER RECALL when everything else is working, then that tProject project does not exist. In that case, the process will time-out.<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
===Rule 5 - Manually Save tProject Project Files After Receiving Data from VTube-LASER===<br />
<table width=1000><br />
<tr valign=top><br />
<td width=300><br />
It is important to manually save the data that was just received by tProject from VTube-LASER. <b>tProject will not save it automatically.</b><br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
<br><br><br />
<br />
==Other Pages==<br />
* See [[VTube-LASER]]<br />
* See [[VTube-STEP]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Eaton_Leonard_Lightspeed_Communications_SetupEaton Leonard Lightspeed Communications Setup2023-04-19T13:42:21Z<p>Mcone: </p>
<hr />
<div><table><br />
<tr><br />
<td width="200"><br />
This document outlines the basic communications setup for a Lightspeed control.<br />
</td><br />
<td><br />
[[image:EL_Lightspeed.jpg|right]]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width="200"><br />
* Back to the Eaton Leonard [[Lightspeed]] page<br><br><br />
* Back to the general [[Eaton Leonard]]<br />
<br><br><br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
__NOTOC__<br />
<br><br><br />
<br />
<br />
==How to Setup VTube for Communications with Supravision Network==<br />
<table><br />
<tr><br />
<td width="300"><br />
The VTube Benderlink setup grid needs to be properly configured to for Supravision Network communications before it will work with the LightSpeed.<br><br><br />
The instructions that follow assume that VTube has been setup using the instructions.<br><br />
<br><br />
See '''[[Setup VTube for Supravision Network Communication]]''' for detailed instructions on how configure VTube for communications.<br />
<br />
</td><br />
<td><br />
[[image:vtube_benderlinkgrid.png|600px]]<br><br><br />
</td><br />
</tr><br />
</table><br />
<br />
==How To Setup Eaton Leonard LIGHTSPEED for Communications with VTube-LASER==<br />
<br />
<table><br />
<tr><br />
<td width="300"><br />
Use these steps to set up a connection to LightSpeeds with our [[VTube-LASER]], [[VTube-STEP]], and [[Benderlink]] software packages. All of our software packages are equipped with the Supravision Network protocol - which is a protocol LightSpeed uses to communicate with VTube-LASER.<br />
</td><br />
</table><br />
<br />
===STEP 1: System Menu and Administrative Control===<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
Change to the Systems menu. If you are not running the operator station as an administrator, then press SECURITY and enter the administrator code. (The default administrator code is "123" - but some customers will have changed this code.)<br><br><br />
<br />
Press the DEVICE CONFIG button.<br />
</td><br />
<td><br />
[[image:EL_Lightspeed_SystemMode.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 2: Device Config / Machine Menu===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
In DEVICE CONFIG, enter the MACHINE menu.<br><br><br />
<br />
Select a Measure Machine tab. LightSpeed can store four simultaneous measuring center setups for connection to multiple measuring centers.<br><br><br />
<br />
* '''NAME''': The name value has no effect on the protocol. However, you can give the setup a name here.<br><br><br />
* '''PROTOCOL''': For communications with our software, select the SupraGauge protocol.<br><br><br />
* '''BENDER NUMBER''': Set the bender to a unique integer number. This is very important if you have multiple benders that share the same network location for transfer of data files.<br><br>The bender number allows each bender to understand if the data files dropped in the shared path are its responsibility or another bender's.<br><br>The original SV protocol can handle bender numbers from 1 to 99. VTube can go higher if necessary.<br><br><br />
* '''CHECKBOX OPTIONS''': Select any of the checkbox options that you want to enable. <br><br><br />
**'''1 - LOG''': To log activity as it occurs<br><br><br />
**'''2 - METRIC''': To make all linear data communicate in Millimeters rather than the default Inches<br><br><br />
**'''3 - PRESET CLR''': To ignore any incoming Centerline Radius data. If you leave this disabled, then you will probably need to setup the CLR after LightSpeed receives a new part file from the measuring center.<br><br><br />
* '''NETWORK PATH''': Set the Network Path to a location on the network that allows read/write access. This is the path where all machines and measuring centers will drop and pickup command files using the Supravision Network protocol.<br><br><br />
<br />
</td><br />
<td valign=top><br />
[[image:EL_Lightspeed_DeviceConfig_Machine.png|400px]]<br><br><br />
[[image:EL_Lightspeed_DeviceConfig_Machine_MeasuringCenterSetup.png|400px]]<br />
</td><br />
</tr><br />
<br />
<br />
<tr><br />
<td width="300" valign=top><br />
<br />
====IMPORTANT NOTE ABOUT WHERE TO PUT THE NETWORK PATH====<br />
Use only a path that is pointing to a location on the LightSpeed control local hard drive. Then link the VTube-LASER computer to that path through the network.'''<br><br><br />
It is our experience that LightSpeed controls will often only communicate using the Supravision Network protocol if the path is set to the LightSpeed's local hard drive.<br><br>Either LightSpeed cannot handle a UNC path (with slashes like \\192.168.0.2\VTube-LASER) or it cannot handle slightly delayed network speeds.<br><br>However, sharing the LightSpeed drive and using it as the shared path works well.<br><br><br />
<br />
</td><br />
<td valign=top><br />
[[image:LightSpeed Path Limitations.png|400px]]<br />
</td><br />
</tr><br />
<br />
<br />
</table><br />
<br><br><br />
<br />
==RULES for EATON LEONARD LIGHTSPEED COMMUNICATION==<br />
<br />
<br />
===LightSpeed Controls Require That VTube-LASER uses the SAME PART NUMBER for RECALL===<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
'''The Part Number is very important when VTube-LASER performs a bender data RECALL. It must be set first before you press RECALL.'''<br><br><br />
During RECALL the Eaton Leonard LightSpeed returns data from the FILE in the control based on the part number you entered in VTube-LASER's Bender Setup window.'''<br><br><br />
For example, if you are running "Simulator Part" (see the image on the right), and want to recall the data you see on the screen in the LightSpeed controls, then it is important to type in the exact part number in VTube-LASER's Bender Setup screen before recalling.<br><br><br />
====What Happens When You Recall a Different Part Number====<br />
If you recall part "12345" from VTube-LASER, then the LightSpeed will search for part "12345" in the part database on the disk - and return the data for "12345" from storage if it is found. If it isn't found, then LightSpeed will just let the connection timeout.<br><br><br />
====What Happens When You SEND a Different Part Number====<br />
During SEND from VTube-LASER to the LightSpeed, if the part number is different than the one that is running in memory, then the data will overwrite the data in the FILE and not the one in the control's memory. Please be careful to use the correct Part Number during communications for both SEND and RECALL.<br />
<br><br><br />
</td><br />
<br />
<td><br />
[[image:LightSpeed ProgramScreen ReceivedData in VTL Bender Setup.png|700px]]<br><br><br />
[[image:LightSpeed_ProgramScreen_ReceivedData2.png|700px]]<br><br><br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Some LightSpeed Controls Always Return A Part Number With the First Character Only===<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
This is a bug in some versions of LightSpeed controls - but it does not create a problem for VTube-LASER. If you recall '''123456', then LightSpeed will answer with the data in 123456, but always truncate the part number to "1" alone.<br><br><br />
If this happens during a RECALL, then just tell VTube-LASER to IGNORE the incoming part number every time. (The fact that the LightSpeed answered means that you are using a part number that already exists on the LightSpeed control.)<br />
<br><br><br />
</td><br />
<br />
<td><br />
[[image:VTL reaction to LightSpeed Truncating the Part Number.png|600px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===LightSpeed Part Numbers for Communication are Limited to 33 Characters===<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
The part number character length can be greater than 33 characters in both the LightSpeed and VTube-LASER. However, the part number length is truncated to 33 characters maximum by the LightSpeed <u>during communications</u>.<br><br><br />
See the example RECALL on the right. The incoming part number is truncated in length.<br><br><br />
This is a limitation on the LightSpeed side of the connection. VTube has no control over this limitation. You might want to restrict your part names so that they have less than 33 characters if you want to communicate with VTube.<br><br><br />
</td><br />
<br />
<td><br />
[[image:vtube-laser_v2.7_EL_LightSpeed_PartNumber_Character_Count_Limitation.png|600px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
==VTube-STEP Communications Test With LightSpeed==<br />
<br />
VTube-STEP is the version of VTube that allows you to send data from a model to a bender. <br> (VTube-LASER can SEND and RECALL. See the VTube-LASER section below.) This section is for testing the LightSpeed control with with VTube-STEP.<br><br><br />
<br />
In order to communicate with the LightSpeed control, it's necessary to switch on remote communications in the control in the user interface.<br><br><br />
<br />
===STEP 1: Exit AUTO Mode===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Be sure to exit AUTO mode if that is the mode it is currently in. LightSpeed does not communicate if it is in AUTO mode.<br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 2: Enter the Vector Menu===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Click on the "Vector" button on the right side of the screen.<br><br><br />
</td><br />
<td><br />
[[image:LightSpeed_ProgramScreen_VectorButton.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
===STEP 3: Choose the VMM for VTube===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Newer versions of LightSpeed let you choose which measuring center to communicate with.<br><br><br />
Choose the VTube option.<br />
</td><br />
<td><br />
[[image:LightSpeed_VMM_Choice.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 4: Allow Network Control===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
In the VECTOR menu, press the "Allow Network Control" button until it turns orange. (Orange indicates that it is toggled on.)<br><br><br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_AllowNetworkControl.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 5: SEND a Part from the VTube-STEP===<br />
<table width=800><br />
<tr valign=top><br />
<td width=300><br />
If a part is not in VTube already, then load one in before you continue.<br><br><br />
Use the [[VTube-STEP]] Bender Output menu to send new part data to a bender using Supravision Network protocol.<br><br><br />
<br />
<br><br><br />
Go to the SV Network tab and choose the bender number. This will use the Benderlink setup in System Options to control the SVNET path.<br><br><br />
<br />
* The Supravision Network protocol uses a bender number (from 1 to 99) to indicate which bender should pickup and use the Supravision file that is being saved by VTube-STEP to the file path in the network box. Use whatever you have programmed into the EL LightSpeed setup for bender number.<br><br><br />
* The LightSpeed uses the Part Number value from the VTube PART SETUP menu to create a part file if it does not exist on the LightSpeed hard drive. If it does exist, then the data can be merged into the existing file with the same part number.<br />
<br />
</td><br />
<td><br />
[[image:vtube-step_v2.2_svnet.png|400px]]<br><br><br />
</td><br />
<br />
</tr><br />
</table><br />
<br><br><br />
<br />
===STEP 6: Observe the LightSpeed Communications Status Box===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
The Communications Status box in the LightSpeed Vector menu should show activity - like that the incoming file was saved.<br><br>You will also see the options of Overwriting the part data, or Importing the YBC data only. Overwriting the part data will allow the new data to completely overwrite the part in memory. Pressing the YBC data only will change only the YBC data in memory with the incoming data.<br><br><br />
For setting up a new part, you can press overwrite. For corrections you can press YBC data only.<br><br><br />
In this test, press Overwrite Part Data.<br><br><br />
If you press Overwrite the Part Data, then LightSpeed will clear the current setup and clear the Tools. A tool set will need to be recalled to clear the red cells in the ALL page Bend Die column.<br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_ReceivedData2.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
==VTube-LASER Communications Test With LightSpeed==<br />
<br />
VTube-LASER is the version of VTube that communicates with a FARO arm in order to measure tubes and correct benders. <br> It's communications capabilities are more sophisticated than VTube-STEP. VTube-STEP can send data to the bender. VTube-LASER can SEND and RECALL. <br> This section is for testingthe LightSpeed control with with VTube-LASER.<br><br><br />
<br />
In order to communicate with the LightSpeed control, it's necessary to switch on remote communications in the control in the user interface.<br><br><br />
<br />
===STEP 1: Exit AUTO Mode===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Be sure to exit AUTO mode if that is the mode it is currently in. LightSpeed does not communicate if it is in AUTO mode.<br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 2: Enter the Vector Menu===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Click on the "Vector" button on the right side of the screen.<br><br><br />
</td><br />
<td><br />
[[image:LightSpeed_ProgramScreen_VectorButton.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
===STEP 3: Choose the VMM for VTube===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Newer versions of LightSpeed let you choose which measuring center to communicate with.<br><br><br />
Choose the VTube option.<br />
</td><br />
<td><br />
[[image:LightSpeed_VMM_Choice.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 4: Allow Network Control===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
In the VECTOR menu, press the "Allow Network Control" button until it turns orange. (Orange indicates that it is toggled on.)<br><br><br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_AllowNetworkControl.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 5: SEND a Part from the VTube-LASER===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
From the measuring center, send a part to the LightSpeed. (This assumes that the connection has been made and that the SVNET protcol is being used, and that the appropriate bender number is used at the measuring center.<br><br><br />
<br />
The screen on the right shows an example Bender Setup screen in [[VTube-LASER]] for communication.<br><br><br />
To send new data, choose the bender number, set the Part Number (if it is not, enter the "Bender Setup" menu, and press the AUTO SEND button.<br><br><br />
'''Keep in mind that the PART NUMBER value in VTube is the name that will be used by the LightSpeed to save the part data that it received.'''<br />
</td><br />
<td valign=top><br />
[[image:vtube-laser_v2.2_bendersetup_sendbluecolumns.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 6: Observe the LightSpeed Communications Status Box===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
The Communications Status box in the LightSpeed Vector menu should show activity - like that the incoming file was saved.<br><br>You will also see the options of Overwriting the part data, or Importing the YBC data only. Overwriting the part data will allow the new data to completely overwrite the part in memory. Pressing the YBC data only will change only the YBC data in memory with the incoming data.<br><br><br />
For setting up a new part, you can press overwrite. For corrections you can press YBC data only.<br><br><br />
In this test, press Overwrite Part Data.<br><br><br />
If you press Overwrite the Part Data, then LightSpeed will clear the current setup and clear the Tools. A tool set will need to be recalled to clear the red cells in the ALL page Bend Die column.<br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_ReceivedData2.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 7: Perform a RECALL at VTube-LASER===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Change any value in the YBC data. Make the value change easily recognizable for when we recall the data in VTube-LASER.<br><br><br />
Now, at VTube-LASER press RECALL. LightSpeed should answer VTube-LASER with the new data in the blue columns.<br><br><br />
If the new values are displayed in the blue LRA columns, then the communication was successful.<br><br><br />
'''(Note: VTube-STEP cannot perform a RECALL from the bender. Only VTube-LASER can RECALL data.)'''<br />
</td><br />
<td valign=top><br />
[[image:vtube-laser_v2.2_bendersetup_recall_lra_from_bender.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
==Solving LightSpeed Bend Die / Incoming RADIUS Mismatch Issue==<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
If you send a part to the LightSpeed that has dies that do not match the current die setup, then the Bend Die columns in the VIEW page will turn red - indicating a problem.<br><br><br />
The key to fixing the problem is to be sure the incoming radius eventually matches the TOOL page die radius value.<br />
</td><br />
<br />
<td><br />
[[image:lightspeed_red_benddie_cells.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===SOLUTION 1: Change the Radius Values in VTube before Sending Data===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
It's easy to change the radius values for a tube model before sending the data to the bender. In the video example, you will see a radius value of 1". However, in the Eaton Leonard LightSpeed, the die centerline radius is 1.125". So, just before sending data to the bender, we change the radius to match the bend die on the bender. This does not change the shape of the tube in space. It only changes the lengths between bends.<br><br><br />
''Click on the image to view the video.''</td><br />
<td><br />
[[image:vtube-step_v2_2_change_radii_then_transfer_to_bender_video.png|400px|link=http://www.advancedtubular.com/vtube-step/vtube-step-v2.2_changing_radii_to_match_benddie.mp4]]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
===SOLUTION 2: Be sure the TOOLS Page Is Setup With Non Zero Values===<br />
<table><br />
<tr><br />
<td width="300" valign=top><br />
When you clear a part, the process also can clear the tool page so that all the values are reset to zero. The image on the right shows what happens after clear of a program in the LightSpeed<br><br><br />
The LightSpeed control needs these values to be filled out in order to work properly.<br><br><br />
So you can either enter data manually, or load a good Tool setup into this page.</td><br />
<td><br />
[[image:lightspeed_toolpage_zeros.png|400px]]<br><br />
[[image:lightspeed_tools_page_setup.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
===SOLUTION 3: Be sure the YBC Page CENTERLINE RADIUS Values Match the TOOL Page Values===<br />
<table><br />
<tr valign=top><br />
<td width="300" valign=top><br />
Also, it is important that the centerline radius value in the YBC page matches the radius value in the TOOL page.<br><br><br />
In the YBC page, be sure that the radius value in the radius box matches the radius value at the top of the die icon.<br><br><br />
In the image example, the centerline radius value is ZERO, but the tools are setup for 1.875". This will cause the Bend Die value in the corresponding cell of the FULL view to turn red.<br><br><br />
[[image:lightspeed_ybcpage_clr_zero_closeup.png|300px]]<br />
<br />
</td><br />
<td><br />
[[image:lightspeed_ybcpage_clr_zero.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
==Other Pages==<br />
<br />
<table><br />
<br />
<tr><br />
<td width="200"><br />
* Back to the Eaton Leonard [[Lightspeed]] page<br />
* Back to [[Eaton Leonard]]<br />
<br><br><br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table></div>Mconehttp://www.advancedtubular.wiki/index.php/BendProBendPro2023-04-18T21:44:28Z<p>Mcone: </p>
<hr />
<div><table cellpadding="30"><br />
<tr valign=top><br />
<td width="400"><br />
BendPro is a popular bender software package used by multiple bender OEMs in the industry. There are two versions commonly used: G1 and G2<br />
<br><br><br />
__NOTOC__<br />
</td><br />
<td><br />
[[image:BendPro-G2.png|300px]]<br><br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
= 1 - About BendPro Manual Data File Import =<br />
<br />
<br />
BendPro operators can import Supravision files directly into the part database on the control. The operator enters the FILE window, then opens a dialog and selects the Supravision file to import.<br />
<br />
This allows our software to act as a remote programmer for bender data on a BendPro.<br />
<br />
VTube-LASER and VTube-STEP can build [[Supravision]] files from STEP and IGES models.<br />
<br />
* [[VTube-STEP]]<br />
* [[VTube-LASER]]<br />
<br><br><br />
<br />
<br />
== G1 Manual File Import: Supravision Type ==<br />
<br />
Follow these steps to import Supravision files:<br />
<br />
[[image:G1MainScreen_EditPart_Button.png|600px]]<br><br><br />
[[image:G1PartEditorScreen_ImportPartNumber_Button.png|600px]]<br><br><br />
[[image:G1PartEditorScreen_FileType_Supravision.png|600px]]<br><br><br />
<br />
<br><br><br><br />
<br />
= 2 - About BendPro Measuring Center Communications =<br />
<br />
<br />
BendPro uses the '''Supravision Network''' protocol for communications. Communications are straight-forward, efficient, and very fast.<br />
<br />
The BendPro can be setup to communicate with HEXAGON or FARO ScanArms running our [[VTube-LASER]] software<br />
<br><br><br />
<br />
==How to Check if BendPro G2 Measuring Center Communications Are Possible On Your Bender Control==<br />
<br />
====Utilities - Measure Machine Interface====<br />
<br />
<table cellpadding="30"><br />
<br />
<tr valign=top><br />
<td width=500><br />
The Supravision link is sold by Current Tech as an option that can be enabled.<br><br><br />
It's important to verify that this option is switched on when discovering if a BendPro G2 is ready for communication. Click on the '''Utilities''' pulldown menu...<br><br><br />
</td><br />
<td><br />
[[image:G2V2_BenderScreen_UtilitiesMeasuringCenter.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
<tr valign=top><br />
<td width=500><br />
...then click on the '''Measuring Machine Interface''' option.<br><br><br />
</td><br />
<td><br />
[[image:bendpro_measuring_machine_interface_menuitem.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
<br />
<tr valign=top><br />
<td width=500><br />
If the '''Enable Supravision Client Interface Option''' checkbox will allow you to check the box, then your bender has communication capability.<br><br><br />
</td><br />
<td><br />
[[image:bendpro_supravisioninterface_menu_allow_enableSupravisionClientInterface.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
==How to Check if BendPro G1 Communications is Possible on Your Bender Control==<br />
<br />
====G1 Version====<br />
<br />
<table cellpadding="30"><br />
<tr valign=top><br />
<td width=500><br />
=====Edit Part Button=====<br />
Verify that this option is switched on when discovering if a BendPro G1 is ready for communication.<br><br><br />
'''If you are able to open the BendPro to Supravision Link window then your software has communication capability.'''<br><br><br />
Click on Edit Part button in the main screen:<br><br />
</td><br />
<td><br />
[[image:bendpro_g1_editpart.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
<br />
<tr valign=top><br />
<td width=500><br />
<br />
=====Measure Machine Button=====<br />
Try pressing the Measure Machine button:<br></td><br />
<td><br />
[[image:bendpro_g1_measuremachine.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
<br />
<tr valign=top><br />
<td width=500><br />
<br />
=====BendPro to Supravison Link Screen=====<br />
'''If you can see this BendPro window - then you have communications capabilities on your control.'''<br><br>You can edit the network path for the protocol and also choose and set some communications options.<br><br />
</td><br />
<td><br />
[[image:g1_supravisionscreen.png|400px]]<br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
==How to Setup and Use Communications with BendPro G2==<br />
<br />
====G2 Version Communications Setup====<br />
<br />
<table cellpadding="30"><br />
<tr valign=top><br />
<td width=500><br />
* Enter the Utilities / Measuring Machine Settings menu.<br><br><br />
* Put a check in the checkbox to enable communications.<br><br><br />
* Setup the path that Supravision Network will use for communications.<br><br><br />
* Use the Machine Parameters / General Options to setup the correct bender number. If the bender number does not match the bender number used at the measuring center, then communications will not occur.<br><br><br />
* The G2 user interface does not need to be in the Measuring Center menu to communicate. However, that menu includes a log that displays the time of the last data transmission. If there are errors, then this is where they will be listed. So it is beneficial to change to that menu before communications.<br><br><br />
* It is important to ENABLE the "Receive Y, B, C & CLR Only" option, or the BendPro's setup may be changed in ways that make the bender not run at all.<br><br><br />
This is a closeup of the G2 log after communications:<br><br />
[[image:G2V2_UtilitiesMeasuringCenter_LogAfterCommunications.png|400px]]<br />
</td><br />
<td><br />
[[image:G2V2_MeasuringMachineSettings.png|400px]]<br><br><br />
[[image:bendpro_supravisioninterface_menu_highlighted_setup.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
====G2 Version - DISABLE Host Emulation====<br />
<br />
<table cellpadding="30"><br />
<tr valign=top><br />
<td width=500><br />
Some G2 controls have a '''Host Emulation''' tab menu.<br><br><br />
It is critical that you are sure that the '''host emulation''' mode is '''disabled''' - or standard communications will not work properly.<br><br><br />
Host emulation mode enables BendPro to act like the measuring center side of the communication. If both '''Host Emulation''' and '''Client Interface'' are switched on at the same time, then they interfere with each other.<br />
</td><br />
<td><br />
[[image:G2V2_HostEmulationDisabled.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====G2 Version Communications Rules====<br />
<br />
<table cellpadding="30"><br />
<tr valign=top><br />
<td width=500><br />
The following rules apply for communication using the Supravision Network protocol:<br />
<br />
* To RECALL data from BendPro, the measuring center '''must ask for the part with the correct part name''' - or BendPro will not answer.<br><br><br />
* To correct an ''existing'' part in the bender, the part must be saved in the BendPro database, and must be the active part.<br><br><br />
* <b>The part number must have no spaces.</b> The G2 controls will parse the part number so that all letters after the first space are deleted. For example:<br><br />
<pre>"01234 REV0"</pre> will be trimmed to "01234". If this new part number does not exist, then the G2 control will ask if you want to import a new part.<br><br><br />
* To send a NEW part to the bender, the part number must NOT already be in the database.<br><br><br />
* Changing the first straight length will also change the START position for the first bend. If you are using VTube-LASER to correct the bender, and don't want the first or the last straight lengths to change, then manually set the first adjustment to zero in the Bender Setup menu before sending a correction.<br />
</td><br />
<td><br />
[[image:G2V2_MustEnterPartNumber.png|500px]]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br><br><br />
<br />
==How to Setup and Use Communications on the BendPro G1==<br />
<br />
===G1 Version Communications Setup===<br />
<br />
<table cellpadding="30"><br />
<tr valign=top><br />
<td width=500><br />
* Starting from the main screen, press Edit Part button on the bottom of the screen.<br><br><br />
* Press the Measuring Machine button to enter the Supravision Network screen (see the image on the right).<br><br><br />
* Setup the path that Supravision Network will use for communications.<br><br><br />
* Use the Machine Parameters / General Options to setup the correct bender number. If the bender number does not match the bender number used at the measuring center, then communications will not occur.<br><br><br />
</td><br />
<td><br />
[[image:g1_supravisionscreen.png|400px]]<br><br />
</td><br />
</tr><br />
</table><br />
<br />
===G1 Version Communications Rules===<br />
<br />
<table cellpadding="30"><br />
<tr valign=top><br />
<td width=500><br />
The following rules apply for communication using the Supravision Network protocol:<br />
* Unlike the G2 user interface, the G1 Supravision window needs to be displayed during communications. The menu includes a single line that displays if communications works.<br><br><br />
* Spaces are allowed in the part number - <b>but NOT recommended</b>. If the exact number of spaces don't match, then the communication will fail. It is difficult to differentiate between one space and two spaces, and the G1 can have spaces AFTER the part name - which is not discernable until you enter the keyboard to edit the name. Recommendation: Replace the spaces with underscores.<br><br><br />
* AFTER a send from the measuring center to the bender it is necessary for the operator to walk out to the bender and press the RECEIVE PART DATA button.<br><br>For VTube-LASER '''SEND''', there is no timeout. For Supravision or DOCS, if the timeout occurs before the operator arrives at the bender to press the button, then DOCS and Supravision will delete the data file - and the communications will fail.<br><br>If there are errors, then this is where they will be listed.<br><br><br />
* To correct an existing part in the bender, the part must be saved in the BendPro database, and must be the active part.<br><br><br />
* To send a NEW part to the bender, the part number must NOT already be in the database.<br><br><br />
* Changing the first straight length will also change the START position for the first bend. If you are using VTube-LASER to correct the bender, and don't want the first or the last straight lengths to change, then manually set the first adjustment to zero in the Bender Setup menu before sending a correction.<br />
</td><br />
<td><br />
This is the Communications Status before any communications:<br><br />
[[image:G1_ComStatusReady.png|400px]]<br><br><br />
This is the Communications Status after communications are sent to the measuring center after the measuring center recalled data:<br><br />
[[image:G1_ComStatusSuccessfullySent.png|400px]]<br><br><br />
The G1 control requires you to press RECEIVE PART DATA button after sending data from the measuring center.<Br><br />
[[image:G1_ReceivePartDataButton.png|400px]]<br><br><br />
<br><br />
This image shows the message after the part has been received:<Br><br />
[[image:G1_ComStatusSucessfullyReceived.png|400px]]<br><br />
</td><br />
</tr><br />
</table><br />
<br />
<br><br><br />
<br />
==General Communications Notes==<br />
<br />
===Part Note Length Limitation===<br />
<br />
<table cellpadding="30"><br />
<tr valign=top><br />
<td width=500><br />
BendPro operators can easily type in a part note that is very long:<br />
<br />
* Supravsion (older software on a ROMER or MM5000 measuring center) will shutdown without warning if it receives a part note with more than 95 characters.<br><br><br />
* VTube-LASER can handle any part note length.<br />
<br />
</td><br />
<td><br />
</td><br />
</tr><br />
</table><br />
<br />
===Speed and Centerline Radius Fields Observed===<br />
<table cellpadding="30"><br />
<tr valign=top><br />
<td width=500><br />
* BendPro returns the YBC axis SPEEDS in the Supravision data transfer. This data should be observed and returned from any Benderlink system - or the speeds may be reset to a new value during the next correction. <b>For this reason, it is a good idea to always perform a RECALL before SENDING data corrections to a BendPro control.</b><br><br><br />
* BendPro will use the incoming Ceterline Radius values in the Supravision transmission (rather than the values in the tool page). This data should be observed and returned from any Benderlink system - or the radii may be reset to the new incoming vale during the next correction. <b>For this reason, it is a good idea to always perform a RECALL before SENDING data corrections to a BendPro control.</b> <br />
</td><br />
<td><br />
</td><br />
</tr><br />
</table><br />
<br />
===Non-Bending YBC Row Avoidance Moves===<br />
<table cellpadding="30"><br />
<tr valign=top><br />
<td width=500><br />
BendPro operators will sometimes use non-bending rows in the YBC data to enable special avoidance moves.<br><br><br />
*Supravision and DOCs cannot handle data with avoidance moves inserted in the YBC data. It is necessary to make manual corrections in these cases.<br><br><br />
* VTube-LASER uses a data mapping feature to allow for any number of non-bending rows.<br />
</td><br />
<td><br />
</td><br />
</tr><br />
</table><br />
<br />
===Handling Inverted Rotations===<br />
<table cellpadding="30"><br />
<tr valign=top><br />
<td width=500><br />
* DOCs software will sometimes invert rotations (to move in the opposite direction) - especially when making rotation corrections around the 180 degree area. Be aware of this and be prepared to reset any rotation that is moving in the wrong direction.<br><br><br />
* Supravision observes and maintains the rotation direction found at the bender.<br><br><br />
* VTube-LASER allows operators to check an Invert checkbox to invert any rotation corrected to the opposite direction. Operators of VTube should observe any rotation that is close to 180 degrees to check for the possibility for the need for inversion. This gives operators complete control over the rotation direction during correction.</td><br />
<td><br />
</td><br />
</tr><br />
</table><br />
<br />
== How to Recall Data from BendPro to Become Master Data ==<br />
It is possible to recall data from the BendPro to make it the MASTER data at VTube-LASER using these steps. Be sure that the BendPro is ready for communications before you perform a recall.<br />
<br />
===1 - Enable Communications At BendPro===<br />
<br />
[[image:bendpro_supravisioninterface_menu_highlighted_setup.png|400px]]<br />
<br><br><br />
<br />
===2 - Use the VTube-LASER Bender Setup Screen to Recall Master XYZ===<br />
<br />
[[image:recallbenderxyztomasterxyz.png|800px]]<br><br><br />
<br />
*Select the bender number in Bend Setup.<br />
*Enter the part number to recall. This name must match a name in the BendPro database.<br />
*Click on Setup this Window.<br />
*Click on RECALL Bender XYZ to Master XYZ.<br />
<br><br><br />
<br />
===3 - VTube-LASER will Wait for the Data===<br />
[[image:recallbenderxyztomasterxyz2.png|800px]]<br />
<br><br><br />
<br />
===4 - BendPro will Answer with Data===<br />
<br />
If the part exists at the BendPro, then it will answer with the part and VTube-LASER will display this message:<br />
<br><br><br />
[[image:recallbenderxyztomasterxyz3.png|800px]]<br />
<br />
<br><br><br />
<br />
<br />
===5 - VTube-LASER Will Close the Bender Setup Screen and Display the MASTER Data===<br />
[[image:recallbenderxyztomasterxyz4.png|800px]]<br />
<br />
If you do not see an image, then be sure that Model: MASTER has a checkmark and then press F2-F3. Also, you can check in the Master Tube menu for new coordinates.<br />
<br><br><br />
<br />
===6 - Save the new VTube-LASER Project File===<br />
[[image:recallbenderxyztomasterxyz5.png|800px]]<br />
<br><br><br />
<br><br><br />
<br><br><br />
<br><br><br />
<br />
== How to Assign Default Options in BendPro G2 ==<br />
<br />
These steps allow you to set up BendPro Default Options for reuse when setting up new parts. <br />
<br />
This feature of the BendPro Part Editor is essentially everything about a part other than part geometries - information such as the Tools information (CD and PD lengths, collet depth, etc.), Load and Unload information, Enables, Springback, etc. The Setup Tables and the Default Table are easy to get to and use. <br />
<br />
[[image:bendprodefaultoptions.jpg]]<br />
<br />
<br />
These 3 selections are associated with the default table:<br />
<br />
* If Load From Default Table is selected, the default table information is applied to the Active Part.<br />
* If Save to Default Table is selected, the current settings of the Active Part are saved to the default table.<br />
* Edit Setup Table edits the current default table.<br />
<br />
[[image:bendprodefaultoptions2.jpg]]<br />
<br />
== Other ==<br />
<br />
*See also [[VTube-LASER]]<br />
*See also [[Benderlink for FARO]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Eaton_Leonard_Lightspeed_Communications_SetupEaton Leonard Lightspeed Communications Setup2023-03-16T12:49:42Z<p>Mcone: /* VTube-LASER Communications Test With LightSpeed */</p>
<hr />
<div><table><br />
<tr><br />
<td width="200"><br />
This document outlines the basic communications setup for a Lightspeed control.<br />
</td><br />
<td><br />
[[image:EL_Lightspeed.jpg|right]]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width="200"><br />
* Back to the Eaton Leonard [[Lightspeed]] page<br><br><br />
* Back to the general [[Eaton Leonard]]<br />
<br><br><br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
__TOC__<br />
<br><br><br />
<br />
<br />
==How to Setup VTube for Communications with Supravision Network==<br />
<table><br />
<tr><br />
<td width="300"><br />
The VTube Benderlink setup grid needs to be properly configured to for Supravision Network communications before it will work with the LightSpeed.<br><br><br />
The instructions that follow assume that VTube has been setup using the instructions.<br><br />
<br><br />
See '''[[Setup VTube for Supravision Network Communication]]''' for detailed instructions on how configure VTube for communications.<br />
<br />
</td><br />
<td><br />
[[image:vtube_benderlinkgrid.png|600px]]<br><br><br />
</td><br />
</tr><br />
</table><br />
<br />
==How To Setup Eaton Leonard LIGHTSPEED for Communications with VTube-LASER==<br />
<br />
<table><br />
<tr><br />
<td width="300"><br />
Use these steps to set up a connection to LightSpeeds with our [[VTube-LASER]], [[VTube-STEP]], and [[Benderlink]] software packages. All of our software packages are equipped with the Supravision Network protocol - which is a protocol LightSpeed uses to communicate with VTube-LASER.<br />
</td><br />
</table><br />
<br />
===STEP 1: System Menu and Administrative Control===<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
Change to the Systems menu. If you are not running the operator station as an administrator, then press SECURITY and enter the administrator code. (The default administrator code is "123" - but some customers will have changed this code.)<br><br><br />
<br />
Press the DEVICE CONFIG button.<br />
</td><br />
<td><br />
[[image:EL_Lightspeed_SystemMode.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 2: Device Config / Machine Menu===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
In DEVICE CONFIG, enter the MACHINE menu.<br><br><br />
<br />
Select a Measure Machine tab. LightSpeed can store four simultaneous measuring center setups for connection to multiple measuring centers.<br><br><br />
<br />
* '''NAME''': The name value has no effect on the protocol. However, you can give the setup a name here.<br><br><br />
* '''PROTOCOL''': For communications with our software, select the SupraGauge protocol.<br><br><br />
* '''BENDER NUMBER''': Set the bender to a unique integer number. This is very important if you have multiple benders that share the same network location for transfer of data files.<br><br>The bender number allows each bender to understand if the data files dropped in the shared path are its responsibility or another bender's.<br><br>The original SV protocol can handle bender numbers from 1 to 99. VTube can go higher if necessary.<br><br><br />
* '''CHECKBOX OPTIONS''': Select any of the checkbox options that you want to enable. <br><br><br />
**'''1 - LOG''': To log activity as it occurs<br><br><br />
**'''2 - METRIC''': To make all linear data communicate in Millimeters rather than the default Inches<br><br><br />
**'''3 - PRESET CLR''': To ignore any incoming Centerline Radius data. If you leave this disabled, then you will probably need to setup the CLR after LightSpeed receives a new part file from the measuring center.<br><br><br />
* '''NETWORK PATH''': Set the Network Path to a location on the network that allows read/write access. This is the path where all machines and measuring centers will drop and pickup command files using the Supravision Network protocol.<br><br><br />
<br />
</td><br />
<td valign=top><br />
[[image:EL_Lightspeed_DeviceConfig_Machine.png|400px]]<br><br><br />
[[image:EL_Lightspeed_DeviceConfig_Machine_MeasuringCenterSetup.png|400px]]<br />
</td><br />
</tr><br />
<br />
<br />
<tr><br />
<td width="300" valign=top><br />
<br />
====IMPORTANT NOTE ABOUT WHERE TO PUT THE NETWORK PATH====<br />
Use only a path that is pointing to a location on the LightSpeed control local hard drive. Then link the VTube-LASER computer to that path through the network.'''<br><br><br />
It is our experience that LightSpeed controls will often only communicate using the Supravision Network protocol if the path is set to the LightSpeed's local hard drive.<br><br>Either LightSpeed cannot handle a UNC path (with slashes like \\192.168.0.2\VTube-LASER) or it cannot handle slightly delayed network speeds.<br><br>However, sharing the LightSpeed drive and using it as the shared path works well.<br><br><br />
<br />
</td><br />
<td valign=top><br />
[[image:LightSpeed Path Limitations.png|400px]]<br />
</td><br />
</tr><br />
<br />
<br />
</table><br />
<br><br><br />
<br />
==RULES for EATON LEONARD LIGHTSPEED COMMUNICATION==<br />
<br />
<br />
===LightSpeed Controls Require That VTube-LASER uses the SAME PART NUMBER for RECALL===<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
'''The Part Number is very important when VTube-LASER performs a bender data RECALL. It must be set first before you press RECALL.'''<br><br><br />
During RECALL the Eaton Leonard LightSpeed returns data from the FILE in the control based on the part number you entered in VTube-LASER's Bender Setup window.'''<br><br><br />
For example, if you are running "Simulator Part" (see the image on the right), and want to recall the data you see on the screen in the LightSpeed controls, then it is important to type in the exact part number in VTube-LASER's Bender Setup screen before recalling.<br><br><br />
====What Happens When You Recall a Different Part Number====<br />
If you recall part "12345" from VTube-LASER, then the LightSpeed will search for part "12345" in the part database on the disk - and return the data for "12345" from storage if it is found. If it isn't found, then LightSpeed will just let the connection timeout.<br><br><br />
====What Happens When You SEND a Different Part Number====<br />
During SEND from VTube-LASER to the LightSpeed, if the part number is different than the one that is running in memory, then the data will overwrite the data in the FILE and not the one in the control's memory. Please be careful to use the correct Part Number during communications for both SEND and RECALL.<br />
<br><br><br />
</td><br />
<br />
<td><br />
[[image:LightSpeed ProgramScreen ReceivedData in VTL Bender Setup.png|700px]]<br><br><br />
[[image:LightSpeed_ProgramScreen_ReceivedData2.png|700px]]<br><br><br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Some LightSpeed Controls Always Return A Part Number With the First Character Only===<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
This is a bug in some versions of LightSpeed controls - but it does not create a problem for VTube-LASER. If you recall '''123456', then LightSpeed will answer with the data in 123456, but always truncate the part number to "1" alone.<br><br><br />
If this happens during a RECALL, then just tell VTube-LASER to IGNORE the incoming part number every time. (The fact that the LightSpeed answered means that you are using a part number that already exists on the LightSpeed control.)<br />
<br><br><br />
</td><br />
<br />
<td><br />
[[image:VTL reaction to LightSpeed Truncating the Part Number.png|600px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===LightSpeed Part Numbers for Communication are Limited to 33 Characters===<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
The part number character length can be greater than 33 characters in both the LightSpeed and VTube-LASER. However, the part number length is truncated to 33 characters maximum by the LightSpeed <u>during communications</u>.<br><br><br />
See the example RECALL on the right. The incoming part number is truncated in length.<br><br><br />
This is a limitation on the LightSpeed side of the connection. VTube has no control over this limitation. You might want to restrict your part names so that they have less than 33 characters if you want to communicate with VTube.<br><br><br />
</td><br />
<br />
<td><br />
[[image:vtube-laser_v2.7_EL_LightSpeed_PartNumber_Character_Count_Limitation.png|600px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
==VTube-STEP Communications Test With LightSpeed==<br />
<br />
VTube-STEP is the version of VTube that allows you to send data from a model to a bender. <br> (VTube-LASER can SEND and RECALL. See the VTube-LASER section below.) This section is for testing the LightSpeed control with with VTube-STEP.<br><br><br />
<br />
In order to communicate with the LightSpeed control, it's necessary to switch on remote communications in the control in the user interface.<br><br><br />
<br />
===STEP 1: Exit AUTO Mode===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Be sure to exit AUTO mode if that is the mode it is currently in. LightSpeed does not communicate if it is in AUTO mode.<br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 2: Enter the Vector Menu===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Click on the "Vector" button on the right side of the screen.<br><br><br />
</td><br />
<td><br />
[[image:LightSpeed_ProgramScreen_VectorButton.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
===STEP 3: Choose the VMM for VTube===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Newer versions of LightSpeed let you choose which measuring center to communicate with.<br><br><br />
Choose the VTube option.<br />
</td><br />
<td><br />
[[image:LightSpeed_VMM_Choice.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 4: Allow Network Control===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
In the VECTOR menu, press the "Allow Network Control" button until it turns orange. (Orange indicates that it is toggled on.)<br><br><br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_AllowNetworkControl.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 5: SEND a Part from the VTube-STEP===<br />
<table width=800><br />
<tr valign=top><br />
<td width=300><br />
If a part is not in VTube already, then load one in before you continue.<br><br><br />
Use the [[VTube-STEP]] Bender Output menu to send new part data to a bender using Supravision Network protocol.<br><br><br />
<br />
<br><br><br />
Go to the SV Network tab and choose the bender number. This will use the Benderlink setup in System Options to control the SVNET path.<br><br><br />
<br />
* The Supravision Network protocol uses a bender number (from 1 to 99) to indicate which bender should pickup and use the Supravision file that is being saved by VTube-STEP to the file path in the network box. Use whatever you have programmed into the EL LightSpeed setup for bender number.<br><br><br />
* The LightSpeed uses the Part Number value from the VTube PART SETUP menu to create a part file if it does not exist on the LightSpeed hard drive. If it does exist, then the data can be merged into the existing file with the same part number.<br />
<br />
</td><br />
<td><br />
[[image:vtube-step_v2.2_svnet.png|400px]]<br><br><br />
</td><br />
<br />
</tr><br />
</table><br />
<br><br><br />
<br />
===STEP 6: Observe the LightSpeed Communications Status Box===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
The Communications Status box in the LightSpeed Vector menu should show activity - like that the incoming file was saved.<br><br>You will also see the options of Overwriting the part data, or Importing the YBC data only. Overwriting the part data will allow the new data to completely overwrite the part in memory. Pressing the YBC data only will change only the YBC data in memory with the incoming data.<br><br><br />
For setting up a new part, you can press overwrite. For corrections you can press YBC data only.<br><br><br />
In this test, press Overwrite Part Data.<br><br><br />
If you press Overwrite the Part Data, then LightSpeed will clear the current setup and clear the Tools. A tool set will need to be recalled to clear the red cells in the ALL page Bend Die column.<br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_ReceivedData2.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
==VTube-LASER Communications Test With LightSpeed==<br />
<br />
VTube-LASER is the version of VTube that communicates with a FARO arm in order to measure tubes and correct benders. <br> It's communications capabilities are more sophisticated than VTube-STEP. VTube-STEP can send data to the bender. VTube-LASER can SEND and RECALL. <br> This section is for testingthe LightSpeed control with with VTube-LASER.<br><br><br />
<br />
In order to communicate with the LightSpeed control, it's necessary to switch on remote communications in the control in the user interface.<br><br><br />
<br />
===STEP 1: Exit AUTO Mode===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Be sure to exit AUTO mode if that is the mode it is currently in. LightSpeed does not communicate if it is in AUTO mode.<br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 2: Enter the Vector Menu===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Click on the "Vector" button on the right side of the screen.<br><br><br />
</td><br />
<td><br />
[[image:LightSpeed_ProgramScreen_VectorButton.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
===STEP 3: Choose the VMM for VTube===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Newer versions of LightSpeed let you choose which measuring center to communicate with.<br><br><br />
Choose the VTube option.<br />
</td><br />
<td><br />
[[image:LightSpeed_VMM_Choice.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 4: Allow Network Control===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
In the VECTOR menu, press the "Allow Network Control" button until it turns orange. (Orange indicates that it is toggled on.)<br><br><br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_AllowNetworkControl.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 5: SEND a Part from the VTube-LASER===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
From the measuring center, send a part to the LightSpeed. (This assumes that the connection has been made and that the SVNET protcol is being used, and that the appropriate bender number is used at the measuring center.<br><br><br />
<br />
The screen on the right shows an example Bender Setup screen in [[VTube-LASER]] for communication.<br><br><br />
To send new data, choose the bender number, set the Part Number (if it is not, enter the "Bender Setup" menu, and press the AUTO SEND button.<br><br><br />
'''Keep in mind that the PART NUMBER value in VTube is the name that will be used by the LightSpeed to save the part data that it received.'''<br />
</td><br />
<td valign=top><br />
[[image:vtube-laser_v2.2_bendersetup_sendbluecolumns.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 6: Observe the LightSpeed Communications Status Box===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
The Communications Status box in the LightSpeed Vector menu should show activity - like that the incoming file was saved.<br><br>You will also see the options of Overwriting the part data, or Importing the YBC data only. Overwriting the part data will allow the new data to completely overwrite the part in memory. Pressing the YBC data only will change only the YBC data in memory with the incoming data.<br><br><br />
For setting up a new part, you can press overwrite. For corrections you can press YBC data only.<br><br><br />
In this test, press Overwrite Part Data.<br><br><br />
If you press Overwrite the Part Data, then LightSpeed will clear the current setup and clear the Tools. A tool set will need to be recalled to clear the red cells in the ALL page Bend Die column.<br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_ReceivedData2.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 7: Perform a RECALL at VTube-LASER===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Change any value in the YBC data. Make the value change easily recognizable for when we recall the data in VTube-LASER.<br><br><br />
Now, at VTube-LASER press RECALL. LightSpeed should answer VTube-LASER with the new data in the blue columns.<br><br><br />
If the new values are displayed in the blue LRA columns, then the communication was successful.<br><br><br />
'''(Note: VTube-STEP cannot perform a RECALL from the bender. Only VTube-LASER can RECALL data.)'''<br />
</td><br />
<td valign=top><br />
[[image:vtube-laser_v2.2_bendersetup_recall_lra_from_bender.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
==Solving LightSpeed Bend Die / Incoming RADIUS Mismatch Issue==<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
If you send a part to the LightSpeed that has dies that do not match the current die setup, then the Bend Die columns in the VIEW page will turn red - indicating a problem.<br><br><br />
The key to fixing the problem is to be sure the incoming radius eventually matches the TOOL page die radius value.<br />
</td><br />
<br />
<td><br />
[[image:lightspeed_red_benddie_cells.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===SOLUTION 1: Change the Radius Values in VTube before Sending Data===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
It's easy to change the radius values for a tube model before sending the data to the bender. In the video example, you will see a radius value of 1". However, in the Eaton Leonard LightSpeed, the die centerline radius is 1.125". So, just before sending data to the bender, we change the radius to match the bend die on the bender. This does not change the shape of the tube in space. It only changes the lengths between bends.<br><br><br />
''Click on the image to view the video.''</td><br />
<td><br />
[[image:vtube-step_v2_2_change_radii_then_transfer_to_bender_video.png|400px|link=http://www.advancedtubular.com/vtube-step/vtube-step-v2.2_changing_radii_to_match_benddie.mp4]]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
===SOLUTION 2: Be sure the TOOLS Page Is Setup With Non Zero Values===<br />
<table><br />
<tr><br />
<td width="300" valign=top><br />
When you clear a part, the process also can clear the tool page so that all the values are reset to zero. The image on the right shows what happens after clear of a program in the LightSpeed<br><br><br />
The LightSpeed control needs these values to be filled out in order to work properly.<br><br><br />
So you can either enter data manually, or load a good Tool setup into this page.</td><br />
<td><br />
[[image:lightspeed_toolpage_zeros.png|400px]]<br><br />
[[image:lightspeed_tools_page_setup.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
===SOLUTION 3: Be sure the YBC Page CENTERLINE RADIUS Values Match the TOOL Page Values===<br />
<table><br />
<tr valign=top><br />
<td width="300" valign=top><br />
Also, it is important that the centerline radius value in the YBC page matches the radius value in the TOOL page.<br><br><br />
In the YBC page, be sure that the radius value in the radius box matches the radius value at the top of the die icon.<br><br><br />
In the image example, the centerline radius value is ZERO, but the tools are setup for 1.875". This will cause the Bend Die value in the corresponding cell of the FULL view to turn red.<br><br><br />
[[image:lightspeed_ybcpage_clr_zero_closeup.png|300px]]<br />
<br />
</td><br />
<td><br />
[[image:lightspeed_ybcpage_clr_zero.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
==Other Pages==<br />
<br />
<table><br />
<br />
<tr><br />
<td width="200"><br />
* Back to the Eaton Leonard [[Lightspeed]] page<br />
* Back to [[Eaton Leonard]]<br />
<br><br><br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table></div>Mconehttp://www.advancedtubular.wiki/index.php/Eaton_Leonard_Lightspeed_Communications_SetupEaton Leonard Lightspeed Communications Setup2023-03-16T12:49:29Z<p>Mcone: /* VTube-LASER Communications Test With LightSpeed */</p>
<hr />
<div><table><br />
<tr><br />
<td width="200"><br />
This document outlines the basic communications setup for a Lightspeed control.<br />
</td><br />
<td><br />
[[image:EL_Lightspeed.jpg|right]]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width="200"><br />
* Back to the Eaton Leonard [[Lightspeed]] page<br><br><br />
* Back to the general [[Eaton Leonard]]<br />
<br><br><br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
__TOC__<br />
<br><br><br />
<br />
<br />
==How to Setup VTube for Communications with Supravision Network==<br />
<table><br />
<tr><br />
<td width="300"><br />
The VTube Benderlink setup grid needs to be properly configured to for Supravision Network communications before it will work with the LightSpeed.<br><br><br />
The instructions that follow assume that VTube has been setup using the instructions.<br><br />
<br><br />
See '''[[Setup VTube for Supravision Network Communication]]''' for detailed instructions on how configure VTube for communications.<br />
<br />
</td><br />
<td><br />
[[image:vtube_benderlinkgrid.png|600px]]<br><br><br />
</td><br />
</tr><br />
</table><br />
<br />
==How To Setup Eaton Leonard LIGHTSPEED for Communications with VTube-LASER==<br />
<br />
<table><br />
<tr><br />
<td width="300"><br />
Use these steps to set up a connection to LightSpeeds with our [[VTube-LASER]], [[VTube-STEP]], and [[Benderlink]] software packages. All of our software packages are equipped with the Supravision Network protocol - which is a protocol LightSpeed uses to communicate with VTube-LASER.<br />
</td><br />
</table><br />
<br />
===STEP 1: System Menu and Administrative Control===<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
Change to the Systems menu. If you are not running the operator station as an administrator, then press SECURITY and enter the administrator code. (The default administrator code is "123" - but some customers will have changed this code.)<br><br><br />
<br />
Press the DEVICE CONFIG button.<br />
</td><br />
<td><br />
[[image:EL_Lightspeed_SystemMode.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 2: Device Config / Machine Menu===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
In DEVICE CONFIG, enter the MACHINE menu.<br><br><br />
<br />
Select a Measure Machine tab. LightSpeed can store four simultaneous measuring center setups for connection to multiple measuring centers.<br><br><br />
<br />
* '''NAME''': The name value has no effect on the protocol. However, you can give the setup a name here.<br><br><br />
* '''PROTOCOL''': For communications with our software, select the SupraGauge protocol.<br><br><br />
* '''BENDER NUMBER''': Set the bender to a unique integer number. This is very important if you have multiple benders that share the same network location for transfer of data files.<br><br>The bender number allows each bender to understand if the data files dropped in the shared path are its responsibility or another bender's.<br><br>The original SV protocol can handle bender numbers from 1 to 99. VTube can go higher if necessary.<br><br><br />
* '''CHECKBOX OPTIONS''': Select any of the checkbox options that you want to enable. <br><br><br />
**'''1 - LOG''': To log activity as it occurs<br><br><br />
**'''2 - METRIC''': To make all linear data communicate in Millimeters rather than the default Inches<br><br><br />
**'''3 - PRESET CLR''': To ignore any incoming Centerline Radius data. If you leave this disabled, then you will probably need to setup the CLR after LightSpeed receives a new part file from the measuring center.<br><br><br />
* '''NETWORK PATH''': Set the Network Path to a location on the network that allows read/write access. This is the path where all machines and measuring centers will drop and pickup command files using the Supravision Network protocol.<br><br><br />
<br />
</td><br />
<td valign=top><br />
[[image:EL_Lightspeed_DeviceConfig_Machine.png|400px]]<br><br><br />
[[image:EL_Lightspeed_DeviceConfig_Machine_MeasuringCenterSetup.png|400px]]<br />
</td><br />
</tr><br />
<br />
<br />
<tr><br />
<td width="300" valign=top><br />
<br />
====IMPORTANT NOTE ABOUT WHERE TO PUT THE NETWORK PATH====<br />
Use only a path that is pointing to a location on the LightSpeed control local hard drive. Then link the VTube-LASER computer to that path through the network.'''<br><br><br />
It is our experience that LightSpeed controls will often only communicate using the Supravision Network protocol if the path is set to the LightSpeed's local hard drive.<br><br>Either LightSpeed cannot handle a UNC path (with slashes like \\192.168.0.2\VTube-LASER) or it cannot handle slightly delayed network speeds.<br><br>However, sharing the LightSpeed drive and using it as the shared path works well.<br><br><br />
<br />
</td><br />
<td valign=top><br />
[[image:LightSpeed Path Limitations.png|400px]]<br />
</td><br />
</tr><br />
<br />
<br />
</table><br />
<br><br><br />
<br />
==RULES for EATON LEONARD LIGHTSPEED COMMUNICATION==<br />
<br />
<br />
===LightSpeed Controls Require That VTube-LASER uses the SAME PART NUMBER for RECALL===<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
'''The Part Number is very important when VTube-LASER performs a bender data RECALL. It must be set first before you press RECALL.'''<br><br><br />
During RECALL the Eaton Leonard LightSpeed returns data from the FILE in the control based on the part number you entered in VTube-LASER's Bender Setup window.'''<br><br><br />
For example, if you are running "Simulator Part" (see the image on the right), and want to recall the data you see on the screen in the LightSpeed controls, then it is important to type in the exact part number in VTube-LASER's Bender Setup screen before recalling.<br><br><br />
====What Happens When You Recall a Different Part Number====<br />
If you recall part "12345" from VTube-LASER, then the LightSpeed will search for part "12345" in the part database on the disk - and return the data for "12345" from storage if it is found. If it isn't found, then LightSpeed will just let the connection timeout.<br><br><br />
====What Happens When You SEND a Different Part Number====<br />
During SEND from VTube-LASER to the LightSpeed, if the part number is different than the one that is running in memory, then the data will overwrite the data in the FILE and not the one in the control's memory. Please be careful to use the correct Part Number during communications for both SEND and RECALL.<br />
<br><br><br />
</td><br />
<br />
<td><br />
[[image:LightSpeed ProgramScreen ReceivedData in VTL Bender Setup.png|700px]]<br><br><br />
[[image:LightSpeed_ProgramScreen_ReceivedData2.png|700px]]<br><br><br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Some LightSpeed Controls Always Return A Part Number With the First Character Only===<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
This is a bug in some versions of LightSpeed controls - but it does not create a problem for VTube-LASER. If you recall '''123456', then LightSpeed will answer with the data in 123456, but always truncate the part number to "1" alone.<br><br><br />
If this happens during a RECALL, then just tell VTube-LASER to IGNORE the incoming part number every time. (The fact that the LightSpeed answered means that you are using a part number that already exists on the LightSpeed control.)<br />
<br><br><br />
</td><br />
<br />
<td><br />
[[image:VTL reaction to LightSpeed Truncating the Part Number.png|600px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===LightSpeed Part Numbers for Communication are Limited to 33 Characters===<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
The part number character length can be greater than 33 characters in both the LightSpeed and VTube-LASER. However, the part number length is truncated to 33 characters maximum by the LightSpeed <u>during communications</u>.<br><br><br />
See the example RECALL on the right. The incoming part number is truncated in length.<br><br><br />
This is a limitation on the LightSpeed side of the connection. VTube has no control over this limitation. You might want to restrict your part names so that they have less than 33 characters if you want to communicate with VTube.<br><br><br />
</td><br />
<br />
<td><br />
[[image:vtube-laser_v2.7_EL_LightSpeed_PartNumber_Character_Count_Limitation.png|600px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
==VTube-STEP Communications Test With LightSpeed==<br />
<br />
VTube-STEP is the version of VTube that allows you to send data from a model to a bender. <br> (VTube-LASER can SEND and RECALL. See the VTube-LASER section below.) This section is for testing the LightSpeed control with with VTube-STEP.<br><br><br />
<br />
In order to communicate with the LightSpeed control, it's necessary to switch on remote communications in the control in the user interface.<br><br><br />
<br />
===STEP 1: Exit AUTO Mode===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Be sure to exit AUTO mode if that is the mode it is currently in. LightSpeed does not communicate if it is in AUTO mode.<br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 2: Enter the Vector Menu===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Click on the "Vector" button on the right side of the screen.<br><br><br />
</td><br />
<td><br />
[[image:LightSpeed_ProgramScreen_VectorButton.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
===STEP 3: Choose the VMM for VTube===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Newer versions of LightSpeed let you choose which measuring center to communicate with.<br><br><br />
Choose the VTube option.<br />
</td><br />
<td><br />
[[image:LightSpeed_VMM_Choice.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 4: Allow Network Control===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
In the VECTOR menu, press the "Allow Network Control" button until it turns orange. (Orange indicates that it is toggled on.)<br><br><br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_AllowNetworkControl.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 5: SEND a Part from the VTube-STEP===<br />
<table width=800><br />
<tr valign=top><br />
<td width=300><br />
If a part is not in VTube already, then load one in before you continue.<br><br><br />
Use the [[VTube-STEP]] Bender Output menu to send new part data to a bender using Supravision Network protocol.<br><br><br />
<br />
<br><br><br />
Go to the SV Network tab and choose the bender number. This will use the Benderlink setup in System Options to control the SVNET path.<br><br><br />
<br />
* The Supravision Network protocol uses a bender number (from 1 to 99) to indicate which bender should pickup and use the Supravision file that is being saved by VTube-STEP to the file path in the network box. Use whatever you have programmed into the EL LightSpeed setup for bender number.<br><br><br />
* The LightSpeed uses the Part Number value from the VTube PART SETUP menu to create a part file if it does not exist on the LightSpeed hard drive. If it does exist, then the data can be merged into the existing file with the same part number.<br />
<br />
</td><br />
<td><br />
[[image:vtube-step_v2.2_svnet.png|400px]]<br><br><br />
</td><br />
<br />
</tr><br />
</table><br />
<br><br><br />
<br />
===STEP 6: Observe the LightSpeed Communications Status Box===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
The Communications Status box in the LightSpeed Vector menu should show activity - like that the incoming file was saved.<br><br>You will also see the options of Overwriting the part data, or Importing the YBC data only. Overwriting the part data will allow the new data to completely overwrite the part in memory. Pressing the YBC data only will change only the YBC data in memory with the incoming data.<br><br><br />
For setting up a new part, you can press overwrite. For corrections you can press YBC data only.<br><br><br />
In this test, press Overwrite Part Data.<br><br><br />
If you press Overwrite the Part Data, then LightSpeed will clear the current setup and clear the Tools. A tool set will need to be recalled to clear the red cells in the ALL page Bend Die column.<br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_ReceivedData2.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
==VTube-LASER Communications Test With LightSpeed==<br />
<br />
VTube-LASER is the version of VTube that communicates with a FARO arm in order to measure tubes and correct benders. <br> It's communications capabilities are more sophisticated than VTube-STEP. VTube-STEP can send data to the bender. VTube-LASER can SEND and RECALL. This section is for testingthe LightSpeed control with with VTube-LASER.<br><br><br />
<br />
In order to communicate with the LightSpeed control, it's necessary to switch on remote communications in the control in the user interface.<br><br><br />
<br />
===STEP 1: Exit AUTO Mode===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Be sure to exit AUTO mode if that is the mode it is currently in. LightSpeed does not communicate if it is in AUTO mode.<br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 2: Enter the Vector Menu===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Click on the "Vector" button on the right side of the screen.<br><br><br />
</td><br />
<td><br />
[[image:LightSpeed_ProgramScreen_VectorButton.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
===STEP 3: Choose the VMM for VTube===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Newer versions of LightSpeed let you choose which measuring center to communicate with.<br><br><br />
Choose the VTube option.<br />
</td><br />
<td><br />
[[image:LightSpeed_VMM_Choice.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 4: Allow Network Control===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
In the VECTOR menu, press the "Allow Network Control" button until it turns orange. (Orange indicates that it is toggled on.)<br><br><br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_AllowNetworkControl.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 5: SEND a Part from the VTube-LASER===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
From the measuring center, send a part to the LightSpeed. (This assumes that the connection has been made and that the SVNET protcol is being used, and that the appropriate bender number is used at the measuring center.<br><br><br />
<br />
The screen on the right shows an example Bender Setup screen in [[VTube-LASER]] for communication.<br><br><br />
To send new data, choose the bender number, set the Part Number (if it is not, enter the "Bender Setup" menu, and press the AUTO SEND button.<br><br><br />
'''Keep in mind that the PART NUMBER value in VTube is the name that will be used by the LightSpeed to save the part data that it received.'''<br />
</td><br />
<td valign=top><br />
[[image:vtube-laser_v2.2_bendersetup_sendbluecolumns.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 6: Observe the LightSpeed Communications Status Box===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
The Communications Status box in the LightSpeed Vector menu should show activity - like that the incoming file was saved.<br><br>You will also see the options of Overwriting the part data, or Importing the YBC data only. Overwriting the part data will allow the new data to completely overwrite the part in memory. Pressing the YBC data only will change only the YBC data in memory with the incoming data.<br><br><br />
For setting up a new part, you can press overwrite. For corrections you can press YBC data only.<br><br><br />
In this test, press Overwrite Part Data.<br><br><br />
If you press Overwrite the Part Data, then LightSpeed will clear the current setup and clear the Tools. A tool set will need to be recalled to clear the red cells in the ALL page Bend Die column.<br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_ReceivedData2.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 7: Perform a RECALL at VTube-LASER===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Change any value in the YBC data. Make the value change easily recognizable for when we recall the data in VTube-LASER.<br><br><br />
Now, at VTube-LASER press RECALL. LightSpeed should answer VTube-LASER with the new data in the blue columns.<br><br><br />
If the new values are displayed in the blue LRA columns, then the communication was successful.<br><br><br />
'''(Note: VTube-STEP cannot perform a RECALL from the bender. Only VTube-LASER can RECALL data.)'''<br />
</td><br />
<td valign=top><br />
[[image:vtube-laser_v2.2_bendersetup_recall_lra_from_bender.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
==Solving LightSpeed Bend Die / Incoming RADIUS Mismatch Issue==<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
If you send a part to the LightSpeed that has dies that do not match the current die setup, then the Bend Die columns in the VIEW page will turn red - indicating a problem.<br><br><br />
The key to fixing the problem is to be sure the incoming radius eventually matches the TOOL page die radius value.<br />
</td><br />
<br />
<td><br />
[[image:lightspeed_red_benddie_cells.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===SOLUTION 1: Change the Radius Values in VTube before Sending Data===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
It's easy to change the radius values for a tube model before sending the data to the bender. In the video example, you will see a radius value of 1". However, in the Eaton Leonard LightSpeed, the die centerline radius is 1.125". So, just before sending data to the bender, we change the radius to match the bend die on the bender. This does not change the shape of the tube in space. It only changes the lengths between bends.<br><br><br />
''Click on the image to view the video.''</td><br />
<td><br />
[[image:vtube-step_v2_2_change_radii_then_transfer_to_bender_video.png|400px|link=http://www.advancedtubular.com/vtube-step/vtube-step-v2.2_changing_radii_to_match_benddie.mp4]]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
===SOLUTION 2: Be sure the TOOLS Page Is Setup With Non Zero Values===<br />
<table><br />
<tr><br />
<td width="300" valign=top><br />
When you clear a part, the process also can clear the tool page so that all the values are reset to zero. The image on the right shows what happens after clear of a program in the LightSpeed<br><br><br />
The LightSpeed control needs these values to be filled out in order to work properly.<br><br><br />
So you can either enter data manually, or load a good Tool setup into this page.</td><br />
<td><br />
[[image:lightspeed_toolpage_zeros.png|400px]]<br><br />
[[image:lightspeed_tools_page_setup.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
===SOLUTION 3: Be sure the YBC Page CENTERLINE RADIUS Values Match the TOOL Page Values===<br />
<table><br />
<tr valign=top><br />
<td width="300" valign=top><br />
Also, it is important that the centerline radius value in the YBC page matches the radius value in the TOOL page.<br><br><br />
In the YBC page, be sure that the radius value in the radius box matches the radius value at the top of the die icon.<br><br><br />
In the image example, the centerline radius value is ZERO, but the tools are setup for 1.875". This will cause the Bend Die value in the corresponding cell of the FULL view to turn red.<br><br><br />
[[image:lightspeed_ybcpage_clr_zero_closeup.png|300px]]<br />
<br />
</td><br />
<td><br />
[[image:lightspeed_ybcpage_clr_zero.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
==Other Pages==<br />
<br />
<table><br />
<br />
<tr><br />
<td width="200"><br />
* Back to the Eaton Leonard [[Lightspeed]] page<br />
* Back to [[Eaton Leonard]]<br />
<br><br><br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table></div>Mconehttp://www.advancedtubular.wiki/index.php/Eaton_Leonard_Lightspeed_Communications_SetupEaton Leonard Lightspeed Communications Setup2023-03-16T12:48:23Z<p>Mcone: /* VTube-STEP Communications Test With LightSpeed */</p>
<hr />
<div><table><br />
<tr><br />
<td width="200"><br />
This document outlines the basic communications setup for a Lightspeed control.<br />
</td><br />
<td><br />
[[image:EL_Lightspeed.jpg|right]]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width="200"><br />
* Back to the Eaton Leonard [[Lightspeed]] page<br><br><br />
* Back to the general [[Eaton Leonard]]<br />
<br><br><br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
__TOC__<br />
<br><br><br />
<br />
<br />
==How to Setup VTube for Communications with Supravision Network==<br />
<table><br />
<tr><br />
<td width="300"><br />
The VTube Benderlink setup grid needs to be properly configured to for Supravision Network communications before it will work with the LightSpeed.<br><br><br />
The instructions that follow assume that VTube has been setup using the instructions.<br><br />
<br><br />
See '''[[Setup VTube for Supravision Network Communication]]''' for detailed instructions on how configure VTube for communications.<br />
<br />
</td><br />
<td><br />
[[image:vtube_benderlinkgrid.png|600px]]<br><br><br />
</td><br />
</tr><br />
</table><br />
<br />
==How To Setup Eaton Leonard LIGHTSPEED for Communications with VTube-LASER==<br />
<br />
<table><br />
<tr><br />
<td width="300"><br />
Use these steps to set up a connection to LightSpeeds with our [[VTube-LASER]], [[VTube-STEP]], and [[Benderlink]] software packages. All of our software packages are equipped with the Supravision Network protocol - which is a protocol LightSpeed uses to communicate with VTube-LASER.<br />
</td><br />
</table><br />
<br />
===STEP 1: System Menu and Administrative Control===<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
Change to the Systems menu. If you are not running the operator station as an administrator, then press SECURITY and enter the administrator code. (The default administrator code is "123" - but some customers will have changed this code.)<br><br><br />
<br />
Press the DEVICE CONFIG button.<br />
</td><br />
<td><br />
[[image:EL_Lightspeed_SystemMode.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 2: Device Config / Machine Menu===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
In DEVICE CONFIG, enter the MACHINE menu.<br><br><br />
<br />
Select a Measure Machine tab. LightSpeed can store four simultaneous measuring center setups for connection to multiple measuring centers.<br><br><br />
<br />
* '''NAME''': The name value has no effect on the protocol. However, you can give the setup a name here.<br><br><br />
* '''PROTOCOL''': For communications with our software, select the SupraGauge protocol.<br><br><br />
* '''BENDER NUMBER''': Set the bender to a unique integer number. This is very important if you have multiple benders that share the same network location for transfer of data files.<br><br>The bender number allows each bender to understand if the data files dropped in the shared path are its responsibility or another bender's.<br><br>The original SV protocol can handle bender numbers from 1 to 99. VTube can go higher if necessary.<br><br><br />
* '''CHECKBOX OPTIONS''': Select any of the checkbox options that you want to enable. <br><br><br />
**'''1 - LOG''': To log activity as it occurs<br><br><br />
**'''2 - METRIC''': To make all linear data communicate in Millimeters rather than the default Inches<br><br><br />
**'''3 - PRESET CLR''': To ignore any incoming Centerline Radius data. If you leave this disabled, then you will probably need to setup the CLR after LightSpeed receives a new part file from the measuring center.<br><br><br />
* '''NETWORK PATH''': Set the Network Path to a location on the network that allows read/write access. This is the path where all machines and measuring centers will drop and pickup command files using the Supravision Network protocol.<br><br><br />
<br />
</td><br />
<td valign=top><br />
[[image:EL_Lightspeed_DeviceConfig_Machine.png|400px]]<br><br><br />
[[image:EL_Lightspeed_DeviceConfig_Machine_MeasuringCenterSetup.png|400px]]<br />
</td><br />
</tr><br />
<br />
<br />
<tr><br />
<td width="300" valign=top><br />
<br />
====IMPORTANT NOTE ABOUT WHERE TO PUT THE NETWORK PATH====<br />
Use only a path that is pointing to a location on the LightSpeed control local hard drive. Then link the VTube-LASER computer to that path through the network.'''<br><br><br />
It is our experience that LightSpeed controls will often only communicate using the Supravision Network protocol if the path is set to the LightSpeed's local hard drive.<br><br>Either LightSpeed cannot handle a UNC path (with slashes like \\192.168.0.2\VTube-LASER) or it cannot handle slightly delayed network speeds.<br><br>However, sharing the LightSpeed drive and using it as the shared path works well.<br><br><br />
<br />
</td><br />
<td valign=top><br />
[[image:LightSpeed Path Limitations.png|400px]]<br />
</td><br />
</tr><br />
<br />
<br />
</table><br />
<br><br><br />
<br />
==RULES for EATON LEONARD LIGHTSPEED COMMUNICATION==<br />
<br />
<br />
===LightSpeed Controls Require That VTube-LASER uses the SAME PART NUMBER for RECALL===<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
'''The Part Number is very important when VTube-LASER performs a bender data RECALL. It must be set first before you press RECALL.'''<br><br><br />
During RECALL the Eaton Leonard LightSpeed returns data from the FILE in the control based on the part number you entered in VTube-LASER's Bender Setup window.'''<br><br><br />
For example, if you are running "Simulator Part" (see the image on the right), and want to recall the data you see on the screen in the LightSpeed controls, then it is important to type in the exact part number in VTube-LASER's Bender Setup screen before recalling.<br><br><br />
====What Happens When You Recall a Different Part Number====<br />
If you recall part "12345" from VTube-LASER, then the LightSpeed will search for part "12345" in the part database on the disk - and return the data for "12345" from storage if it is found. If it isn't found, then LightSpeed will just let the connection timeout.<br><br><br />
====What Happens When You SEND a Different Part Number====<br />
During SEND from VTube-LASER to the LightSpeed, if the part number is different than the one that is running in memory, then the data will overwrite the data in the FILE and not the one in the control's memory. Please be careful to use the correct Part Number during communications for both SEND and RECALL.<br />
<br><br><br />
</td><br />
<br />
<td><br />
[[image:LightSpeed ProgramScreen ReceivedData in VTL Bender Setup.png|700px]]<br><br><br />
[[image:LightSpeed_ProgramScreen_ReceivedData2.png|700px]]<br><br><br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Some LightSpeed Controls Always Return A Part Number With the First Character Only===<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
This is a bug in some versions of LightSpeed controls - but it does not create a problem for VTube-LASER. If you recall '''123456', then LightSpeed will answer with the data in 123456, but always truncate the part number to "1" alone.<br><br><br />
If this happens during a RECALL, then just tell VTube-LASER to IGNORE the incoming part number every time. (The fact that the LightSpeed answered means that you are using a part number that already exists on the LightSpeed control.)<br />
<br><br><br />
</td><br />
<br />
<td><br />
[[image:VTL reaction to LightSpeed Truncating the Part Number.png|600px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===LightSpeed Part Numbers for Communication are Limited to 33 Characters===<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
The part number character length can be greater than 33 characters in both the LightSpeed and VTube-LASER. However, the part number length is truncated to 33 characters maximum by the LightSpeed <u>during communications</u>.<br><br><br />
See the example RECALL on the right. The incoming part number is truncated in length.<br><br><br />
This is a limitation on the LightSpeed side of the connection. VTube has no control over this limitation. You might want to restrict your part names so that they have less than 33 characters if you want to communicate with VTube.<br><br><br />
</td><br />
<br />
<td><br />
[[image:vtube-laser_v2.7_EL_LightSpeed_PartNumber_Character_Count_Limitation.png|600px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
==VTube-STEP Communications Test With LightSpeed==<br />
<br />
VTube-STEP is the version of VTube that allows you to send data from a model to a bender. <br> (VTube-LASER can SEND and RECALL. See the VTube-LASER section below.) This section is for testing the LightSpeed control with with VTube-STEP.<br><br><br />
<br />
In order to communicate with the LightSpeed control, it's necessary to switch on remote communications in the control in the user interface.<br><br><br />
<br />
===STEP 1: Exit AUTO Mode===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Be sure to exit AUTO mode if that is the mode it is currently in. LightSpeed does not communicate if it is in AUTO mode.<br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 2: Enter the Vector Menu===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Click on the "Vector" button on the right side of the screen.<br><br><br />
</td><br />
<td><br />
[[image:LightSpeed_ProgramScreen_VectorButton.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
===STEP 3: Choose the VMM for VTube===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Newer versions of LightSpeed let you choose which measuring center to communicate with.<br><br><br />
Choose the VTube option.<br />
</td><br />
<td><br />
[[image:LightSpeed_VMM_Choice.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 4: Allow Network Control===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
In the VECTOR menu, press the "Allow Network Control" button until it turns orange. (Orange indicates that it is toggled on.)<br><br><br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_AllowNetworkControl.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 5: SEND a Part from the VTube-STEP===<br />
<table width=800><br />
<tr valign=top><br />
<td width=300><br />
If a part is not in VTube already, then load one in before you continue.<br><br><br />
Use the [[VTube-STEP]] Bender Output menu to send new part data to a bender using Supravision Network protocol.<br><br><br />
<br />
<br><br><br />
Go to the SV Network tab and choose the bender number. This will use the Benderlink setup in System Options to control the SVNET path.<br><br><br />
<br />
* The Supravision Network protocol uses a bender number (from 1 to 99) to indicate which bender should pickup and use the Supravision file that is being saved by VTube-STEP to the file path in the network box. Use whatever you have programmed into the EL LightSpeed setup for bender number.<br><br><br />
* The LightSpeed uses the Part Number value from the VTube PART SETUP menu to create a part file if it does not exist on the LightSpeed hard drive. If it does exist, then the data can be merged into the existing file with the same part number.<br />
<br />
</td><br />
<td><br />
[[image:vtube-step_v2.2_svnet.png|400px]]<br><br><br />
</td><br />
<br />
</tr><br />
</table><br />
<br><br><br />
<br />
===STEP 6: Observe the LightSpeed Communications Status Box===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
The Communications Status box in the LightSpeed Vector menu should show activity - like that the incoming file was saved.<br><br>You will also see the options of Overwriting the part data, or Importing the YBC data only. Overwriting the part data will allow the new data to completely overwrite the part in memory. Pressing the YBC data only will change only the YBC data in memory with the incoming data.<br><br><br />
For setting up a new part, you can press overwrite. For corrections you can press YBC data only.<br><br><br />
In this test, press Overwrite Part Data.<br><br><br />
If you press Overwrite the Part Data, then LightSpeed will clear the current setup and clear the Tools. A tool set will need to be recalled to clear the red cells in the ALL page Bend Die column.<br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_ReceivedData2.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
==VTube-LASER Communications Test With LightSpeed==<br />
<br />
VTube-LASER is the version of VTube that communicates with a FARO arm in order to measure tubes and correct benders. It's communications capabilities are more sophisticated than VTube-STEP. VTube-STEP can send data to the bender. VTube-LASER can SEND and RECALL. This section is for testingthe LightSpeed control with with VTube-LASER.<br><br><br />
<br />
In order to communicate with the LightSpeed control, it's necessary to switch on remote communications in the control in the user interface.<br><br><br />
<br />
===STEP 1: Exit AUTO Mode===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Be sure to exit AUTO mode if that is the mode it is currently in. LightSpeed does not communicate if it is in AUTO mode.<br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 2: Enter the Vector Menu===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Click on the "Vector" button on the right side of the screen.<br><br><br />
</td><br />
<td><br />
[[image:LightSpeed_ProgramScreen_VectorButton.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
===STEP 3: Choose the VMM for VTube===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Newer versions of LightSpeed let you choose which measuring center to communicate with.<br><br><br />
Choose the VTube option.<br />
</td><br />
<td><br />
[[image:LightSpeed_VMM_Choice.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===STEP 4: Allow Network Control===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
In the VECTOR menu, press the "Allow Network Control" button until it turns orange. (Orange indicates that it is toggled on.)<br><br><br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_AllowNetworkControl.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 5: SEND a Part from the VTube-LASER===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
From the measuring center, send a part to the LightSpeed. (This assumes that the connection has been made and that the SVNET protcol is being used, and that the appropriate bender number is used at the measuring center.<br><br><br />
<br />
The screen on the right shows an example Bender Setup screen in [[VTube-LASER]] for communication.<br><br><br />
To send new data, choose the bender number, set the Part Number (if it is not, enter the "Bender Setup" menu, and press the AUTO SEND button.<br><br><br />
'''Keep in mind that the PART NUMBER value in VTube is the name that will be used by the LightSpeed to save the part data that it received.'''<br />
</td><br />
<td valign=top><br />
[[image:vtube-laser_v2.2_bendersetup_sendbluecolumns.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 6: Observe the LightSpeed Communications Status Box===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
The Communications Status box in the LightSpeed Vector menu should show activity - like that the incoming file was saved.<br><br>You will also see the options of Overwriting the part data, or Importing the YBC data only. Overwriting the part data will allow the new data to completely overwrite the part in memory. Pressing the YBC data only will change only the YBC data in memory with the incoming data.<br><br><br />
For setting up a new part, you can press overwrite. For corrections you can press YBC data only.<br><br><br />
In this test, press Overwrite Part Data.<br><br><br />
If you press Overwrite the Part Data, then LightSpeed will clear the current setup and clear the Tools. A tool set will need to be recalled to clear the red cells in the ALL page Bend Die column.<br />
</td><br />
<td valign=top><br />
[[image:LightSpeed_ProgramScreen_ReceivedData2.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===STEP 7: Perform a RECALL at VTube-LASER===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
Change any value in the YBC data. Make the value change easily recognizable for when we recall the data in VTube-LASER.<br><br><br />
Now, at VTube-LASER press RECALL. LightSpeed should answer VTube-LASER with the new data in the blue columns.<br><br><br />
If the new values are displayed in the blue LRA columns, then the communication was successful.<br><br><br />
'''(Note: VTube-STEP cannot perform a RECALL from the bender. Only VTube-LASER can RECALL data.)'''<br />
</td><br />
<td valign=top><br />
[[image:vtube-laser_v2.2_bendersetup_recall_lra_from_bender.png|400px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
==Solving LightSpeed Bend Die / Incoming RADIUS Mismatch Issue==<br />
<br />
<table><br />
<br />
<tr><br />
<td width="300"><br />
If you send a part to the LightSpeed that has dies that do not match the current die setup, then the Bend Die columns in the VIEW page will turn red - indicating a problem.<br><br><br />
The key to fixing the problem is to be sure the incoming radius eventually matches the TOOL page die radius value.<br />
</td><br />
<br />
<td><br />
[[image:lightspeed_red_benddie_cells.png|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===SOLUTION 1: Change the Radius Values in VTube before Sending Data===<br />
<table><br />
<br />
<tr><br />
<td width="300" valign=top><br />
It's easy to change the radius values for a tube model before sending the data to the bender. In the video example, you will see a radius value of 1". However, in the Eaton Leonard LightSpeed, the die centerline radius is 1.125". So, just before sending data to the bender, we change the radius to match the bend die on the bender. This does not change the shape of the tube in space. It only changes the lengths between bends.<br><br><br />
''Click on the image to view the video.''</td><br />
<td><br />
[[image:vtube-step_v2_2_change_radii_then_transfer_to_bender_video.png|400px|link=http://www.advancedtubular.com/vtube-step/vtube-step-v2.2_changing_radii_to_match_benddie.mp4]]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
===SOLUTION 2: Be sure the TOOLS Page Is Setup With Non Zero Values===<br />
<table><br />
<tr><br />
<td width="300" valign=top><br />
When you clear a part, the process also can clear the tool page so that all the values are reset to zero. The image on the right shows what happens after clear of a program in the LightSpeed<br><br><br />
The LightSpeed control needs these values to be filled out in order to work properly.<br><br><br />
So you can either enter data manually, or load a good Tool setup into this page.</td><br />
<td><br />
[[image:lightspeed_toolpage_zeros.png|400px]]<br><br />
[[image:lightspeed_tools_page_setup.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
===SOLUTION 3: Be sure the YBC Page CENTERLINE RADIUS Values Match the TOOL Page Values===<br />
<table><br />
<tr valign=top><br />
<td width="300" valign=top><br />
Also, it is important that the centerline radius value in the YBC page matches the radius value in the TOOL page.<br><br><br />
In the YBC page, be sure that the radius value in the radius box matches the radius value at the top of the die icon.<br><br><br />
In the image example, the centerline radius value is ZERO, but the tools are setup for 1.875". This will cause the Bend Die value in the corresponding cell of the FULL view to turn red.<br><br><br />
[[image:lightspeed_ybcpage_clr_zero_closeup.png|300px]]<br />
<br />
</td><br />
<td><br />
[[image:lightspeed_ybcpage_clr_zero.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
==Other Pages==<br />
<br />
<table><br />
<br />
<tr><br />
<td width="200"><br />
* Back to the Eaton Leonard [[Lightspeed]] page<br />
* Back to [[Eaton Leonard]]<br />
<br><br><br />
</td><br />
<td><br />
</td><br />
</tr><br />
<br />
</table></div>Mconehttp://www.advancedtubular.wiki/index.php/Vector_Tube_Data_CenterVector Tube Data Center2023-03-16T12:42:11Z<p>Mcone: </p>
<hr />
<div><table><br />
<tr><br />
<td><br />
[[image:vector_tube_data_center_logo.jpg|400px]]<br><br />
[[image:vector_tube_data_center.jpg|300px]]<br><br />
</td><br />
<td><br />
[[image:vector_tube_data_center_sensor.jpg]]<br />
</td><br />
</tr><br />
</table><br />
<br />
==SOFTWARE==<br />
Vector Laservision is typical software that runs on the Eaton Leonard Vector Tube Data Centers. In our opinion, Laservision software is one of the most logically-designed process for bi-directional communication. For example, it does not recall data from benders during corrections loops unless a correction is needed. Also, its user interface leads operators through the inspection process using a simple step by step process.<br />
<br><br><br />
<br />
==COMMUNICATION Ports==<br />
Vector Tube Data Centers include 10 current loop ports that communicate using the legacy Eaton Leonard communications protocol. We have electronics that connect directly to the current loop ports on Vector Tube Data Centers.<br />
See the [[Benderlink Ethernet Module]] page for more information about our long-distance electronics.<br />
<br><br><br />
[[image:vector_tube_data_center_longtable.jpg]]<br />
<br><br><br />
<br />
== APPLICATION Information ==<br />
<br />
[[image:EL_Laservision_Tube_Data_Center.jpg]]<br />
<br />
<table><br />
<tr><br />
<td><br />
Eaton Leonard Vector Tube Data Center and BLM Benders<br><br />
[[image:blinkblm_vector_datasheet_image.jpg|350px]]<br />
</td><br />
<td width=200><br />
[http://www.advancedtubular.com/applications/benderlink/blinkblm_vector_datasheet.pdf Download an applications datasheet for the Eaton Leonard Vector Tube Data Center and BLM Benders.] <br><br />
<br><br />
See also [[Benderlink for BLM]]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td><br />
Eaton Leonard Vector Tube Data Center and [[Addison]]Mckee Benders<br><br />
[[image:blinkaddison_vector_datasheet_image.jpg|350px]]<br />
</td><br />
<td width=200><br />
[http://www.advancedtubular.com/applications/benderlink/blinkaddison_vector_datasheet.pdf Download an applications datasheet] for the Eaton Leonard Vector Tube Data Center and AddisonMckee Benders.<br><br><br />
See also [[Vector Tube Data Center]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
These software packages can communicate with Laservision-based measuring centers:<br />
<br />
*[[Benderlink for Addison]]<br />
*[[Benderlink for BLM]]<br />
*[[Benderlink for Chiyoda]]<br />
*[[Benderlink for CNC Bender]]<br />
*[[Benderlink for Crown]]<br />
*[[Benderlink for Eaton Leonard]]<br />
*[[Benderlink for FARO]]<br />
*[[Benderlink for KEINS]]<br />
*[[Benderlink for MiiC]]<br />
*[[Benderlink for Pines]]<br />
*[[Benderlink for CRIPPA]]<br />
<br />
== LASERVISION SUPPORT == <br />
<br />
If you have questions or need support with your Laservision-based measuring center please contact Numalliance <br />
<br />
+52 442 212 3651 <br><br />
<br />
servicio@addeaton.com <br><br />
<br />
<br><br />
<br></div>Mconehttp://www.advancedtubular.wiki/index.php/Vector_Tube_Data_CenterVector Tube Data Center2023-03-16T12:41:32Z<p>Mcone: </p>
<hr />
<div><table><br />
<tr><br />
<td><br />
[[image:vector_tube_data_center_logo.jpg|400px]]<br><br />
[[image:vector_tube_data_center.jpg|300px]]<br><br />
</td><br />
<td><br />
[[image:vector_tube_data_center_sensor.jpg]]<br />
</td><br />
</tr><br />
</table><br />
<br />
==SOFTWARE==<br />
Vector Laservision is typical software that runs on the Eaton Leonard Vector Tube Data Centers. In our opinion, Laservision software is one of the most logically-designed process for bi-directional communication. For example, it does not recall data from benders during corrections loops unless a correction is needed. Also, its user interface leads operators through the inspection process using a simple step by step process.<br />
<br><br><br />
<br />
==COMMUNICATION Ports==<br />
Vector Tube Data Centers include 10 current loop ports that communicate using the legacy Eaton Leonard communications protocol. We have electronics that connect directly to the current loop ports on Vector Tube Data Centers.<br />
See the [[Benderlink Ethernet Module]] page for more information about our long-distance electronics.<br />
<br><br><br />
[[image:vector_tube_data_center_longtable.jpg]]<br />
<br><br><br />
<br />
== APPLICATION Information ==<br />
<br />
[[image:EL_Laservision_Tube_Data_Center.jpg]]<br />
<br />
<table><br />
<tr><br />
<td><br />
Eaton Leonard Vector Tube Data Center and BLM Benders<br><br />
[[image:blinkblm_vector_datasheet_image.jpg|350px]]<br />
</td><br />
<td width=200><br />
[http://www.advancedtubular.com/applications/benderlink/blinkblm_vector_datasheet.pdf Download an applications datasheet for the Eaton Leonard Vector Tube Data Center and BLM Benders.] <br><br />
<br><br />
See also [[Benderlink for BLM]]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td><br />
Eaton Leonard Vector Tube Data Center and [[Addison]]Mckee Benders<br><br />
[[image:blinkaddison_vector_datasheet_image.jpg|350px]]<br />
</td><br />
<td width=200><br />
[http://www.advancedtubular.com/applications/benderlink/blinkaddison_vector_datasheet.pdf Download an applications datasheet] for the Eaton Leonard Vector Tube Data Center and AddisonMckee Benders.<br><br><br />
See also [[Vector Tube Data Center]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
These software packages can communicate with Laservision-based measuring centers:<br />
<br />
*[[Benderlink for Addison]]<br />
*[[Benderlink for BLM]]<br />
*[[Benderlink for Chiyoda]]<br />
*[[Benderlink for CNC Bender]]<br />
*[[Benderlink for Crown]]<br />
*[[Benderlink for Eaton Leonard]]<br />
*[[Benderlink for FARO]]<br />
*[[Benderlink for KEINS]]<br />
*[[Benderlink for MiiC]]<br />
*[[Benderlink for Pines]]<br />
*[[Benderlink for CRIPPA]]<br />
<br />
== LASERVISION SUPPORT == <br />
<br />
If you have questions or need support with your Laservision-based measuring center please contact Numalliance <br />
<br />
+52 442 212 3651<br />
servicio@addeaton.com<br />
<br><br />
<br></div>Mconehttp://www.advancedtubular.wiki/index.php/Supravision_Network_ProtocolSupravision Network Protocol2023-03-15T20:28:36Z<p>Mcone: </p>
<hr />
<div>[[image:svnetwork_logo.jpg|350px|right]]<br />
__TOC__<br />
<br />
[[Image:Vtube-laser_screen_1_65.jpg|right|thumb|The Advanced Tubular VTube-LASER works with FARO and is a direct replacement with Supravision. It uses the Supravision Network protocol.]]<br />
[[Image:svdos.png|right|thumb|The original DOS Supravision main menu (circa 1980s and '90s)]]<br />
[[Image:svwin.png|right|thumb|The newer Windows Supravision main menu (circa late 1990s to current)]]<br />
<br />
<br />
<br />
==Intro==<br />
<br />
This is a protocol that specifies how to communicate with measuring centers software packages like [[VTube-LASER]], Supravision software using command and data files. <br />
<br />
<br><br><br />
<br />
==Design Purpose==<br />
<br />
<br />
This protocol is designed mainly for enabling bi-directional corrections loops with CNC bending machines with the measuring center as the master data center. It can be used for importing MASTER data from benders that support this feature.<br />
<br />
<br />
<br><br><br />
<br />
==Capabilities/Limitations==<br />
<br />
The SVNET protocol...<br />
<br />
*SUPPORTS up to 99 benders<br><br><br />
<br />
* Some versions of Supravision for Windows software cannot address COM ports above 9 without producing an error during communications. This is, no doubt, an unintentional bug in some versions of Supravision. This is only a serious problem if you plan on communicating with more than 9 benders.<br><br><br />
<br />
* The [[VTube-LASER]] implementation of SVNET can handle any number of COM ports.<br><br><br />
<br />
* SENDS master xyz, corrected LRA, tube diameter, cut length, and bend radii to the bender<br><br><br />
<br />
*RECALLS - For Supravision and DOCS, recalls occur '''before''' they perform a new measure. This approach is less logical than the recall approach by other measuring centers (see the "Compare" note below). The data recalled is corrected LRA, tube diameter, cut length, and bend radii<br><br><br />
<br />
*RECALLS - OTHER MEASURING CENTERS: The [[VTube-LASER]] and Eaton Leonard [[Laservision]] only recalls after a measure and during the correction - and ONLY if the correction needs to occur. We consider the VTube-LASER approach superior because not every measurement will result in the need for a recall from the bender. For example, if the part qualifies to be within tolerance, then there is no need for a recall.)<br><br><br />
<br />
*EL FLOATING POINT Problem: Some versions of Supravision cannot properly handle the floating point conversion of incoming values from the older EL legacy protocol (which does '''not''' follow the IEEE 754 protocol for binary floating point arithmetic). This problem explains why some Eaton Leonard values may be reset to zero or some huge value when transmitting back to the EL Velog, EL-2000, or Premier controls from Supravision.<br><br><br />
<br />
<br />
<br />
<br />
<br />
<br><br><br />
<br />
==Networking Issues==<br />
<br />
<br />
<li>'''STANDARD LAN CONNECTION:''' The protocol requires a standard network connection between the bender and the measuring center running Supravision. In many cases, we place our Benderlink software between Supravision and the bender that never has supported the SVNET protocol. The protocol requires that both computers have access to a shared folder over the network.<br />
</li><br />
<br />
<br><br />
<br />
<li>'''MEASURING CENTER IS MASTER/CLIENT:''' Typically the measuring center is used as the master controller of the connection. It typically initiates all RECALL and SEND requests between itself and the bender. This would make Supravision software the CLIENT. It is the one sending data and making requests. The bender is usually the SERVER because it "listens" (or monitors) for commands from Supravision.<br />
</li><br />
<br />
<br><br />
<br />
<li>'''WHY NOT USE BENDER AS CLIENTS?:''' There are few customers that use the protocol in the opposite way. They make the bender the CLIENT and initiate all communications from the bender. We never recommend this method of communication, because I believe that the measuring center is the MASTER and should be asking for data only when it needs it. It should also only SEND data when it wants to correct the bender. <br />
</li><br />
<br />
<br><br />
<br />
<li>'''PERFORMANCE ISSUES WHEN NETWORK IS DOWN:''' In addition to this, there can be huge drags in SV performance when SV is monitoring for commands from benders. This problem occurs when the network connection is poor or lost. If any bender connections are ENABLED in Supravision, and the network is down, SV slows to a crawl because [i]Windows[/i] slows the Internet Protocol to crawl. I have advised Romer of this issue, and they may resolve the issue in there new DOCS software. Hopefully they will design the DOCS software so that it does not monitor for commands from the bender, except for when DOCS requests a RECALL of data.)<br />
</li><br />
<br />
<br><br />
<br />
<li>'''SHARED FOLDER SETUP:''' Most customers don't mind if the bender's root drive is shared on the network. Supravision is then configured to look at this shared drive over the network. This setup minimizes the possibility that a Windows-base bender controller will slow down or shutdown bender communications if the network connection fails. Some bender control developers prefer to do the opposite; they request that the bender look through the network at a shared connection on the ROMER computer. This method works well for ROMER because it creates a setup where the ROMER computer will always have a connection and never bog down - even if the network is slow or down.<br />
</li><br />
<br />
<br><br />
<br />
<li>'''[[UNC]] or Mapped Drive?:''' [[UNC]] means (Universal Naming Convention)[http://www.google.com/search?hl=en&lr=&defl=en&q=define:UNC&sa=X&oi=glossary_definition&ct=title] We prefer to use [[UNC]] style paths over mapped drives. They are more descriptive, and your computer may lose the address associated with the mapped drive if the network connection fails.</li><br />
<br />
<br />
<br><br><br />
<br />
==History==<br />
<br />
1 - The older versions of the DOS-based Supravision software did not support SVNET communications. It was a later addition by Foad Rekabi.<br />
<br />
<br><br><br />
<br />
2 - Not all versions of the measuring center software packages have the SVNET protocol feature support it properly. It is important that users check their version of Supravision to be sure that what they are using a version of Supravision that uses SVNET properly. This is true for early versions of the DOS and Windows versions of Supravision.<br />
<br />
<br />
<br><br><br />
<br />
==[[VTube-LASER]] Versions to Use for SVNET==<br />
<br />
<table cellpadding="15" width = 650><br />
<tr valign="top"><br />
<td bgcolor="#f0f0f0" width = 200><br />
[[VTube-LASER]]<br />
</td><br />
<td bgcolor="#e3e4f5"><br />
<ol> <br />
<li>All versions support full SVNET protocol</li><br />
</ol><br />
</td><br />
</tr><br />
</table><br />
<br />
==DOC Versions to Use for SVNET==<br />
<br />
<table cellpadding="15" width = 650><br />
<tr valign="top"><br />
<td bgcolor="#f0f0f0" width = 200><br />
DOCS 2.1 and earlier<br />
</td><br />
<td bgcolor="#e3e4f5"><br />
<ol> <br />
<li>Does not support SVNET protocol</li><br><br />
<li>Details: Switch to version 2.2 or higher.<br />
</li><br />
</ol><br />
</td><br />
</tr><br />
</table><br />
<br />
<table cellpadding="15" width = 650><br />
<tr valign="top"><br />
<td bgcolor="#f0f0f0" width = 200><br />
DOCS 2.2<br />
</td><br />
<td bgcolor="#e3e4f5"><br />
<ol> <br />
<li>All versions of DOCS 2.2 are OK for use (Use this version or HIGHER) - </li><br><br />
<li>Details: No known issues exist for the Supravision Network Protocol in this version. <b> Requires TUBE SHOP MANAGER add-on software</b><br />
</li><br />
</ol><br />
</td><br />
</tr><br />
</table><br />
<br />
<table cellpadding="15" width = 650><br />
<tr valign="top"><br />
<td bgcolor="#f0f0f0" width = 200><br />
DOCS 2.3<br />
</td><br />
<td bgcolor="#e3e4f5"><br />
<ol> <br />
<li>This was BETA software (as of the time we added this note)</li><br><br />
<li>Details: It was not released to the general public yet. However, it should work with the SVNET protocol when released. <b> Requires TUBE SHOP MANAGER add-on software</b><br />
</li><br />
</ol><br />
</td><br />
</tr><br />
</table><br />
<br />
<table cellpadding="15" width = 650><br />
<tr valign="top"><br />
<td bgcolor="#f0f0f0" width = 200><br />
DOCS - Versions from 2013<br />
</td><br />
<td bgcolor="#e3e4f5"><br />
<ol> <br />
<li>These versions can reverse the direction of the ROTATIONS when sending corrections back to the bender that has rotations close to 180.</li><br><br />
<li><b> Requires TUBE SHOP MANAGER add-on software</b><br />
</li><br />
</ol><br />
</td><br />
</tr><br />
</table><br />
<br />
==SV Versions to Use/Not Use for SVNET==<br />
<br />
<br />
<table cellpadding="15" width = 650><br />
<tr valign="top"><br />
<td bgcolor="#f0f0f0" width = 200><br />
Windows Version 6<br />
</td><br />
<td bgcolor="#e3e4f5"><br />
<ol> <br />
<li>All versions of 6 OK for Use with minor limitations (Use this version or HIGHER)</li><br><br />
<li>Details: The only known issue is that a PART COMMENT of more than 95 characters in length will crash SV 6. (Some bender setup technicians will enter much more than 95 characters in their BendPro setups - causing SV 6 to crash during a RECALL.)</li><br />
</ol><br />
</td><br />
</tr><br />
</table><br />
<br />
<table cellpadding="15" width = 650><br />
<tr valign="top"><br />
<td bgcolor="#f0f0f0" width = 200><br />
Windows Version 5.00.0<br />
</td><br />
<td bgcolor="#e3e4f5"><br />
<ol> <br />
<li>DO NOT USE (Upgrade to HIGHER version)</li><br><br />
<li>Details: Causes the program to report "This program has performed an illegal function and will be shutdown" when it attempts to perform a Supravsion Network communication.<br />
</li><br />
</ol><br />
</td><br />
</tr><br />
</table><br />
<br />
<table cellpadding="15" width = 650><br />
<tr valign="top"><br />
<td bgcolor="#f0f0f0" width = 200><br />
DOS Version 4.00.9398 <br />
</td><br />
<td bgcolor="#e3e4f5"><br />
<ol> <br />
<li>DO NOT USE (Upgrade to HIGHER version)</li><br><br />
<li>Details: No TIMEOUT Recognized for Supravision Network</li><br><br />
<li>File Info: VR.EXE 364,080 05-22-98 12:19p</li><br />
</ol><br />
</td><br />
</tr><br />
</table><br />
<br />
<table cellpadding="15" width = 650><br />
<tr valign="top"><br />
<td bgcolor="#f0f0f0" width = 200><br />
DOS Version 3.58.9570 <br />
</td><br />
<td bgcolor="#e3e4f5"><br />
<ol> <br />
<li>OK for Use (Use this version or HIGHER)</li><br><br />
<li>Details: Older versions will not work properly or don't have the feature</li><br><br />
<li>File Info: VR.EXE 375KB 11/2/98 2:49PM</li><br />
<br />
[http://www.advancedtubular.com/supravision/sv_3_58.zip Download sv_3_48.zip to update your DOS Supravision executable.] The zip file contains a text file and VR.EXE, which is the Supravision file to replace your existing older version of SV for DOS.<br />
<br />
</ol><br />
</td><br />
</tr><br />
</table></div>Mconehttp://www.advancedtubular.wiki/index.php/VTube-STEPVTube-STEP2023-03-02T15:49:49Z<p>Mcone: /* Diagnostics */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=300><br />
[[image:vtube-step_logo_2.png|300px]]<br />
Import tube data from solid models, then produce reports, and send data to benders.<br><br><br />
<br />
</td><br />
<td width=300><br />
[[image:VTS2_SplashScreen.png|500px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
__NOTOC__<br />
<br />
<br />
==Quick Links==<br />
<br />
* [[VTube-STEP Updates]]<br />
* [[VTube-STEP Videos]]<br />
* [[VTube Software Maintenance Plan]] (SMP)<br />
* Also see [[VTube-LASER]] (for measuring with a FARO arm)<br />
* See the [[Model-based Definition]] page to learn how VTube uses this concept and why it is so important.<br />
* [[How VTube Licensing Works]]<br />
* [[Differences Between VTube License Types]]<br />
<br><br />
<br />
== Compatibility With Other CAD Packages==<br />
* [[VTube Import from SIEMENS NX]]<br />
* [[VTube Import from SIEMENS Solid Edge]]<br />
* [[VTube Import from Autodesk Inventor]]<br />
<br><br />
<br />
== Setup ==<br />
* See [[Automatic Backup of the VTube Global Configuration File]] (Version 4 or Newer)<br />
* How to [[Change the VTube Default Setup]]<br />
* How to [[Copy a default VTube configuration to another computer with VTube]]<br />
* [[How to overcome ShellExecuteEx failed errors during install]]<br />
* See [[How to Register the VTube License]] for each computer<br />
* See [[How To Install VTube to Windows XP]]<br />
* See [[How to Bypass the Not Commonly Run Message in Windows]] during installation or dongle setup<br />
* [[How to Change VTube VPort Color]]<br />
* [[Setup of SolidWorks Template File Paths]]<br />
* Read about the [[VTube Language Editor]]<br />
* How to [[Import VTube Report Templates]]<br />
* How to [[Setup VTube-STEP for the Network License Manager]]<br />
* How to [[Find and edit the HTML template files in VTube]]<br />
* How to [[Change the default linear units in VTube]]<br />
* How to [[Set the Number of Values Beyond the Decimal for VTube]]<br />
* How to [[Change the VTube User Interface Language]]<br />
* [[Ideal Windows Font Size for VTube]]<br />
* How to find the [[VTube Bender Template Location]]<br><br><br />
<br />
== Setup for Communications with CNC Benders ==<br />
* See [[How to Export to a COMCO CSV File in VTube-STEP]]<br />
* [[VTube Communications With Transfluid Benders]]<br />
* See [[AddisonMckee]] for Supravision Network setup for communications with VTube-LASER<br />
* See the Tutorial for [[VTube HERBER Bender New Part Setup (SOL Protocol)]]<br />
* See a Tutorial for [[VTube Communication for UNISON Benders]]<br />
* About [[VTube Communication for Winton Benders]]<br />
* Read about [[Chiyoda Communications with VTube]]<br />
* How to [[Setup VTube for Supravision Network Communication]]<br />
* About [[VTube Robomac Communications]]<br />
* How to [[Setup VTube for Supravision Network Communication]]<br />
* Read About [[VTube Communication for SOCO]]<br />
* Read About [[VTube Communication with AMOB]]<br />
* See a Tutorial for [[VTube Communication for CRIPPA MPF]]<br />
* [[RS-232 Communications Adapters]] for communications to legacy benders<br />
<br><br />
<br />
==Diagnostics==<br />
<br />
* Diagnose issues with the hardware key (dongle): See [[VTube Hardware Key Messages]]<br />
* [[How to Report VTube Errors]]<br />
* How to [[Check for a connection to the Internet license server]].<br />
<br><br />
<br />
==Performance ==<br />
* See [[VTube Limits and Disk Requirements]]<br />
* See [[VTube and Windows 10 - Compatibility and Performance Notes]]<br />
* Fix for VTube Shutdown [[Issues with Raptr Online Gaming App PLAYS.TV]]<br />
* How to find the [[VTube Report Template Location]] <br />
* Recommended [[VTube-LASER Screen Resolution]]<br />
* Recommended [[VTube Computer Specification]]<br />
* See [[Recommended VTube-STEP Screen Resolutions]]<br />
* How to check [[OpenGL Drivers]] versions<br />
<br />
<br><br />
<br />
== Tutorials ==<br />
<br />
* See [[How to Export to a COMCO CSV File in VTube-STEP]]<br />
* Learn about [[Bender Rotation Directions]]<br />
* See [[How to Use Embedded Math in VTube Float Point Edit Boxes]]<br />
* See [[How to orient the tube to show a rotation view in VTube]]<br />
* See [https://www.advancedtubular.net/news/vtube-step-measure-from-a-drilled-hole How to use VTube-STEP to measure From a drilled hole in a solid model]<br />
* See [[VTube-LASER and VTube-STEP - How to Reset the XYZ Radii to the Default Radius in the Part Setup Menu]]<br />
* About [[VTube Reverse Calc from MIL-D-9898C Absolute Bender Data to Centerline XYZ Data]]<br />
* [[How To Import Channel-Shaped Parts]]<br />
* [[Dealing with Incorrect STEP Linear Unit Scale]]<br />
* [[How To Collect Components]]<br />
* About [[Multi-Elongation in VTube]]<br />
* [[Transform the Part To Make Any Bend True]]<br />
* [[Reverse the Tube Ends]]<br />
* [[How to Export a Supravision File]]<br />
* [[How to Import a Supravision File]]<br />
* About [[VTube-STEP and VTube-LASER Project File Compatibility]]<br />
* See [http://www.nist.gov/el/msid/infotest/step-file-analyzer.cfm STEP File Analyzer] for a program to test STEP files.<br />
* Download a [http://www.advancedtubular.com/vtube-step/VTube-STEP_Version_2.2_VTube_QuickStart.pdf PDF Quick-Start Guide] - Version 2.2, December 23, 2015<br />
* About [[VTube Communication for Winton Benders]]<br />
* VTube-STEP replaced the retired [[TubeCalc]] software in March of 2010.<br />
* [[How To Calculate Cut Lengths in VTube]]<br />
* About [[VTube End Length Offsets]]<br />
* See [[VTube Overbend Calculations for Springback]]<br />
* Read the [[VTube Software License]]<br />
* Recommended [[CAD Conversion Tools]]<br />
* How to [[Import the Split Bend with STEP Version of "VTube-LASER Demo CAD Model 2"]]<br />
* [[Windows Floating Point Setup for VTube]]<br />
* [[How to BACKUP and RESTORE VTube configuration files]]<br />
* [[D of Bend]]<br />
<br />
<br><br><br />
<br />
==Overall Purpose of VTube-STEP: Import Solid Models from ANY Solid Model CAD Program to Convert to Bender Data==<br />
<br />
<table><br />
<tr><br />
<td width=300><br />
VTube-STEP extracts tube data from a STEP or IGES solid model file - from any solid model CAD package.<br><br><br />
VTube-STEP can import centerline data from cylindrical or rectangular solid models ''that have no centerline''.<br><br><br />
[[image:vtube-step-1.82.rectangulartube_7points.jpg|300px]]<br />
</td><br />
<br />
<td><br />
[[image:cadsplash.jpg|400px]]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
== Partners and Distributors==<br />
* [[FARO]] - FARO is the world leader in articulated arms. The FARO Americas division is our exclusive [[VTube-LASER]] distributor for North and South America. VTube-STEP is also a catalog item for FARO.<br />
* [[Horn Machine Tools]] - Manufacturer of benders and [[CSM]] benders<br />
* [[UNISON]] - All electric benders from the UK<br />
* [[SMI]]- Italian line of Silver benders<br />
* [[CRIPPA]] - Italian benders<br />
* [[UNIVERSAL TOOL & ENGINEERING]] - Alpine benders<br />
<br><br />
<br />
<br />
<br />
==Export to Solid Model Programs==<br />
<table><br />
<tr><br />
<td width=300 valign="top"><br />
VTube-STEP can export files that can be loaded into other CAD packages. These are samples of files created by VTube-STEP and loaded into general solid model packages.<br />
</td><br />
<br />
<td><br />
Autodesk Inventor Example<br><br />
[[image:Autodesk_Inventor_Import_from_VTube_Screen_Shot.jpg|400px]]<br><br><br />
SOLIDWORKS Example<br><br />
[[image:vtube-step_v2.3_demotube3_to_solidworks.png|400px]]<br><br><br />
</td><br />
</tr><br />
</table><br />
<br />
==Multiple Language Support==<br />
<table><br />
<tr><br />
<td width=300><br />
VTube-STEP supports multiple languages - even East Asian. You can even translate the user interface to your own language.<br />
</td><br />
<td><br />
[[image:vtube-step_2.3_japanese_screen.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
<br><br><br />
<br />
==Other Pages==<br />
<br />
* Read the [[VTube Software License]]<br />
* Recommended [[CAD Conversion Tools]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Check_for_a_connection_to_the_Internet_license_serverCheck for a connection to the Internet license server2023-03-02T15:46:43Z<p>Mcone: </p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=225><br />
[[image:vtube-laser_logo_1.96.png|200px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
</td><br />
<td width=300><br />
[[image:vtube-step_logo_2.png|200px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
If VTube online activation returns "Code 6" as an error, then that probably indicates that a firewall in the system is blocking access to VTube-LASER's Internet license process.<br />
<br />
To test if VTube will be allowed to communicate to the server, open a command box and ping for the softwarekey.com server to determine if a connection is allowed.<br />
<br />
In the command box, type:<br><br><br />
ping advancedtubular.securekey.com<br />
<br />
[[image:commandbox_ping_softwarekey.png|400px]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Check_for_a_connection_to_the_Internet_license_serverCheck for a connection to the Internet license server2023-03-02T15:41:28Z<p>Mcone: </p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=225><br />
[[image:vtube-laser_logo_1.96.png|200px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
</td><br />
<td width=300><br />
[[image:vtube-step_logo_2.png|200px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
Open a command box and ping for the softwarekey.com server to determine if a connection is allowed.<br />
<br />
In the command box, type:<br><br><br />
ping advancedtubular.securekey.com<br />
<br />
[[image:commandbox_ping_softwarekey.png|400px]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Check_for_a_connection_to_the_Internet_license_serverCheck for a connection to the Internet license server2023-03-02T15:41:19Z<p>Mcone: </p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=225><br />
[[image:vtube-laser_logo_1.96.png|200px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
</td><br />
<td width=300><br />
[[image:vtube-step_logo_2.png|200px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
Open a command box and ping for the softwarekey.com server to determine if a connection is allowed.<br />
<br />
In the command box, type:<br><br />
ping advancedtubular.securekey.com<br />
<br />
[[image:commandbox_ping_softwarekey.png|400px]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Check_for_a_connection_to_the_Internet_license_serverCheck for a connection to the Internet license server2023-03-02T15:41:09Z<p>Mcone: </p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=225><br />
[[image:vtube-laser_logo_1.96.png|200px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
</td><br />
<td width=300><br />
[[image:vtube-step_logo_2.png|200px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
Open a command box and ping for the softwarekey.com server to determine if a connection is allowed.<br />
<br />
In the command box, type:<br />
ping advancedtubular.securekey.com<br />
<br />
[[image:commandbox_ping_softwarekey.png|400px]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Check_for_a_connection_to_the_Internet_license_serverCheck for a connection to the Internet license server2023-03-02T15:40:30Z<p>Mcone: </p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=225><br />
[[image:vtube-laser_logo_1.96.png|200px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
</td><br />
<td width=300><br />
[[image:vtube-step_logo_2.png|200px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
Open a command box and ping for the softwarekey.com server to determine if a connection is allowed.<br />
<br />
In the command box, type: ping advancedtubular.securekey.com<br />
<br />
[[image:commandbox_ping_softwarekey.png|400px]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Check_for_a_connection_to_the_Internet_license_serverCheck for a connection to the Internet license server2023-03-02T15:40:18Z<p>Mcone: </p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=225><br />
[[image:vtube-laser_logo_1.96.png|100px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
</td><br />
<td width=300><br />
[[image:vtube-step_logo_2.png|100px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
Open a command box and ping for the softwarekey.com server to determine if a connection is allowed.<br />
<br />
In the command box, type: ping advancedtubular.securekey.com<br />
<br />
[[image:commandbox_ping_softwarekey.png|400px]]</div>Mconehttp://www.advancedtubular.wiki/index.php/File:Commandbox_ping_softwarekey.pngFile:Commandbox ping softwarekey.png2023-03-02T15:39:53Z<p>Mcone: </p>
<hr />
<div></div>Mconehttp://www.advancedtubular.wiki/index.php/Check_for_a_connection_to_the_Internet_license_serverCheck for a connection to the Internet license server2023-03-02T15:39:36Z<p>Mcone: </p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=225><br />
[[image:vtube-laser_logo_1.96.png|200px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
</td><br />
<td width=300><br />
[[image:vtube-step_logo_2.png|300px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
Open a command box and ping for the softwarekey.com server to determine if a connection is allowed.<br />
<br />
In the command box, type: ping advancedtubular.securekey.com<br />
<br />
[[image:commandbox_ping_softwarekey.png|400px]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Check_for_a_connection_to_the_Internet_license_serverCheck for a connection to the Internet license server2023-03-02T15:34:48Z<p>Mcone: </p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=225><br />
[[image:vtube-laser_logo_1.96.png|200px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
</td><br />
<td width=300><br />
[[image:vtube-step_logo_2.png|300px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
Open a command box and ping for the softwarekey.com server to determine if a connection is allowed.<br />
<br />
In the command box, type: ping advancedtubular.securekey.com</div>Mconehttp://www.advancedtubular.wiki/index.php/Check_for_a_connection_to_the_Internet_license_serverCheck for a connection to the Internet license server2023-03-02T15:33:12Z<p>Mcone: Created page with " You can open a command box and ping for the softwarekey.com server to determine if a connection is allowed. In the command box, type: ping advancedtubular.securekey.com"</p>
<hr />
<div><br />
<br />
You can open a command box and ping for the softwarekey.com server to determine if a connection is allowed.<br />
<br />
In the command box, type: ping advancedtubular.securekey.com</div>Mconehttp://www.advancedtubular.wiki/index.php/VTube-LASERVTube-LASER2023-03-02T15:28:30Z<p>Mcone: /* Diagnostics */</p>
<hr />
<div><table width= 900><br />
<tr cellpadding=10><br />
<td width=200><br />
<br />
VTube-LASER measures tube shapes by connecting to '''FARO ScanArms''', '''HEXAGON (formerly ROMER) Absolute Scan Arms''', and '''KREON Scan Arms''' with integrated scanners, and '''MicroScribe Arms''' with ball probes.<br />
<br />
</td><br />
<td width=700><br />
[[image:VTube-LASER_AssemblyOverModel.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
__NOTOC__<br />
<br />
<br />
== Quick Link for Videos==<br />
* [[VTube-LASER Videos]]<br />
* [[VTube-LASER Videos for FARO]] page<br />
* [[VTube-LASER Videos for HEXAGON ROMER]] Absolute Arms page<br />
* [[VTube-LASER Videos for Kreon]] Arms page<br />
* [[VTube-LASER Videos for MicroScribe]] Arms page<br />
<br><br />
<br />
== Quick Links Other ==<br />
* [[Explain the Differences Between VTube-STEP and VTube-LASER]]<br />
* [[How VTube Licensing Works]]<br />
* Read the [[VTube End-user License Agreement]]<br />
* Remote Demos - [[ConnectWise Remote Support]] page<br />
* Exit to the [https://www.advancedtubular.net/vtube-laser.html Main VTube-LASER] web page<br />
* Also see the [[VTube-STEP]] page<br><br><br />
<br />
* [http://www.advancedtubular.wiki/index.php/VTube-LASER#Executive_Summary Executive Summary]<br />
* [http://www.advancedtubular.wiki/index.php/VTube-LASER#Example_VTube-LASER_Clients_and_Applications Clients and Applications]<br />
* [http://www.advancedtubular.wiki/index.php/VTube-LASER#Some_Key_Features_of_VTube-LASER Key VTube-LASER Features]<br />
* See the [[Model-based Definition]] page to learn how VTube uses this concept and why it is so important.<br />
* See [[VTube-LASER Software Maintenance Agreement]] (SMA)<br />
* [[VTube-LASER at FABTECH]]<br />
* See also [[VTube-STEP]]<br />
* See [[VTube Software Updates]] page from 2021 and before<br />
<br><br><br />
<br />
== Partners and Distributors==<br />
<br />
[[image:VTube-LASER Computer with Four Arm Brands.png|800px]]<br />
<br />
* [[FARO]] - FARO markets articulated arms. FARO actively promotes VTube-LASER as a preferred tube fabrication solution with FARO arms.<br />
* [[HEXAGON]] - HEXAGON ROMER Absolute Arms can be sold with VTube-LASER either separately or in the [[VTUBE-iMC]] system.<br />
* [[Revware]] - Revware sells the MicroScribe arms. Revware can sell VTube-LASER.<br />
* [[Horn Machine Tools]] - HMT Benders and [[CSM]] Benders<br />
* [[UNISON]] - All electric benders from the UK<br />
* [[SMI]]- Italian line of Silver benders<br />
* [[CRIPPA]] - Italian benders<br />
<br><br />
<br />
== Compatibility With Other CAD Packages==<br />
* [[VTube Import from SIEMENS NX]]<br />
* [[VTube Import from SIEMENS Solid Edge]]<br />
* [[VTube Import from Autodesk Inventor]]<br />
<br><br><br />
<br />
<br />
== Discussions About Measuring Approach ==<br />
* [[VTube-LASER Prioritizes Measuring Tube Straights]]<br />
* [[Why VTube-LASER Reduces Data to Centerlines]]<br />
<br><br><br />
<br />
== Tutorials and Information ==<br />
* [[Differences Between VTube License Types]]<br />
* [[Dealing with Incorrect STEP Linear Unit Scale]]<br />
* [[VTube-LASER Training Agenda]]<br />
* [[How to Scan a Point Cloud]]<br />
* [[D of Bend]]<br />
* [[Bender Rotation Directions]]<br />
* How to change Intersection Tolerances:<br>[[image:VTube-LASER_Videos_XYZIntToleranceVideo.png|100px]] View the [https://www.advancedtubular.com/vtube-laser/20220618_HowToChangeXYZIntTolerances.mp4 MP4 video]<br />
<br />
<br />
<br />
<br><br><br />
<br />
===SAMPLE TECH SUPPORT CASES===<br />
Read through these case reports to learn how we solved issues for customers.<br />
<br />
* See [https://app.milanote.com/1MAKCA1QmXJ0dk?p=gA1oUyGzHDb "20210809 End Scan Issue (Milanote Server)"]<br />
* See [https://app.milanote.com/1MAHmh1QmWMi81?p=VkBPRn4NBYQ "20211013 Measure of Boiler Pipe with Rib (Milanote Server)"]<br />
* See [[20191206 FARO Arm - Movement Filter set to zero]]<br />
* See [[20190701 FARO Arm - Unable to scan a part with new scanner]]<br />
* See [[20190627 FARO Arm - Could not run the VTube-LASER Installation Program]]<br />
* See [[20190625 HEXAGON Arm - Could not scan a tube and get good results]]<br />
* See [[20190608 HEXAGON Arm - Could not connect - Wrong arm type was indicated]]<br />
* See [[20190426 HEXAGON Arm - Slow Scanning - We Found Incorrect Scanning Profile]]<br />
* See [[20190424 FARO Arm Customer - Poor Scanning - We Found Multiple Issues]]<br />
* See [[20210421 HEXAGON Arm - Windows would stop VTube-LASER at Initial Load]]<br />
* See [[20210603 HEXAGON Arm - VTube-LASER crashes with Class Not Registered Error at Load]]<br />
* See [[FARO Arm Error Messages]]<br />
<br />
<br><br><br />
<br />
===BENDERLINK: Linking to Benders for Bender Setup and Corrections===<br />
<br />
* See [[Tutorial for How to Correct COMCO Benders with VTube-LASER]]<br />
* See [[How to Export to a COMCO CSV File in VTube-STEP]]<br />
* [[VTube Communications With Transfluid Benders]]<br />
* See [[AddisonMckee]] for Supravision Network setup for communications with VTube-LASER<br />
* [[VTube NUMALLIANCE Bender Correction]]<br />
* [[VTube OMCG Bender Correction]]<br />
* [[VTube HERBER Bender Correction (MES Protocol)]]<br />
* [[VTube HERBER Bender New Part Setup (SOL Protocol)]]<br />
* See a Tutorial for [[VTube Communication for UNISON Benders]]<br />
* See a Tutorial for [[VTube Communication for CRIPPA Supravision]] (This is for newer CRIPPA benders. It is recommended if available.)<br />
* See a Tutorial for [[VTube Communication for CRIPPA MPF]] (This is only for older CRIPPA benders that cannot use Supravision Network communications._<br />
* Read about [[VTube-LASER Bender Corrections]] in general<br />
* About [[VTube Communication for Robomac Wire-form Benders]]<br />
* See [[Eaton Leonard Lightspeed Communications Setup]]<br />
* About [[VTube Communication for Winton Benders]]<br />
* About [[BendPro]] Setup for Communications<br />
* How to [[Setup VTube for Supravision Network Communication]]<br />
* Read about [[VTube Communication with YLM Benders]]<br />
* [[VTube-LASER to Eaton Leonard Premier Communications Tutorial]]<br />
* [[Damping Bender Corrections with VTube-LASER]]<br />
* Read About [[VTube Communication for SOCO]]<br />
* Read About [[VTube Communication with AMOB]]<br />
* About the [[VTube-LASER Split Bend Feature]]<br />
* [[VTube-LASER Addata ZModem Communications Protocol]]<br />
* [[VTube Communication for BLM VGP3D]]<br />
* [[The Effect of Changing Cut Length with No Adjustment to the Draw Bender]]<br />
<br><br><br />
<br />
===SOLIDWORKS Related===<br />
* [[Setup of SolidWorks Template File Paths]]<br />
<br />
<br />
===HEXAGON Absolute Arm (formerly "ROMER") Absolute Arm Related===<br />
* [[HEXAGON Absolute Arm Feature Packs or Control Packs]]<br />
* [[VTube-LASER ROMER RDS Performance Recommendations]]<br />
* [[VTube-LASER-Compatible HEXAGON Scanners and Arms]]<br />
* [[RDS Versions for ROMER Scanners]]<br />
* [[VTUBE-iMC]] - Tube Measuring System with ROMER Absolute Arms<br />
* [[ROMER Ball Probes]]<br />
* [[ROMER Certified Length Bar]]<br />
* [[HEXAGON Absolute Arm Ethernet Setup (for the Scanner-versions of arms)]]<br />
* [[Diagnosing RDS Issues]]<br />
<br />
<br />
<br><br><br />
<br />
===VTube-LASER Accessories===<br />
<br />
* [[VTube-LASER FARO Arm Riser]]<br />
* Other [[Measuring Center Accessories]] for turnkey components recommended<br />
* [[RS-232 Communications Adapters]] for communications to legacy benders<br />
* [[VTube-LASER Demo Tubes]]<br />
<br><br><br />
<br />
===Performance===<br />
* [[VTube Limits and Disk Requirements]]<br />
* [[VTube-LASER ROMER RDS Performance Recommendations]]<br />
* See [[VTube and Windows 10 - Compatibility and Performance Notes]]<br />
* Fix for VTube Shutdown [[Issues with Raptr Online Gaming App PLAYS.TV]]<br />
* Recommended [[VTube-LASER Screen Resolution]]<br />
* [[VTube-LASER Multiple Screen Support]]<br />
* Recommended [[VTube Computer Specification]]<br />
* How to check [[OpenGL Drivers]] versions<br />
<br />
* Recommended [[Ideal Windows Font Size for VTube]]<br />
* See [[FARO Version 6 Scanner]] for details on the blue laser scanner<br />
* See [[Recommendations for FARO Arms]]<br />
* See [[FARO Scanner Settings for VTube-LASER]]<br />
* [[Which are Better for Tube Measurement - LASER Scanners to Ball Probes?]]<br />
<br><br><br />
<br />
===Diagnostics===<br />
* [[How to Diagnose Inaccurate VTube-LASER Measurements]]<br />
* Diagnose issues with the hardware key (dongle): See [[VTube Hardware Key Messages]]<br />
* How to [[Fix the DATUM Report When Showing One Line of Datum Values]]<br />
* [[How to Report VTube Errors]]<br />
* To receive email assistance with FARO Quantum ScanArms, see [[How to Build A FARO-based Diagnostic Video for VTube-LASER]]<br />
* How to [[Check for a connection to the Internet license server]].<br />
<br />
===VTube-LASER Setup===<br />
* See [[VTube-LASER Batch Change for Measure Setup]]<br />
* See [[Automatic Backup of the VTube Global Configuration File]] (Version 4 or Newer)<br />
* How to [[Change Arm Types in VTube-LASER]]<br />
* How to [[Change the VTube Default Setup]]<br />
* How to [[Copy a default VTube configuration to another computer with VTube]]<br />
* [[VTube-LASER Near Pass Deviation]]<br />
* [[How to change arm types in VTube-LASER]]<br />
* [[How to overcome ShellExecuteEx failed errors during install]]<br />
* See [[How to Enter FARO Arm Setup in VTube-LASER]]<br />
* See [[How To Register VTube-LASER Licenses]]<br />
* See [[How To Install VTube to Windows XP]]<br />
* See [[How to Bypass the Not Commonly Run Message in Windows]] during installation or dongle setup<br />
* See how to check the current FARO driver version: [[Check FARO Driver Version for Windows 11]]<br />
* See how to check the current FARO driver version: [[Check FARO Driver Version in Windows 10]]<br />
* [[How to Change VTube VPort Color]]<br />
* [[Recommended VTube-LASER Laser Scanner Settings]]<br />
* Read about the [[VTube Language Editor]]<br />
* How to [[Import VTube Report Templates]]<br />
* How to find the [[VTube Report Template Location]] <br />
* [[How to Activate VTube Licenses]]<br />
* How to [[Setup VTube-LASER for the Network License Manager]]<br />
* How to find the [[VTube Bender Template Location]]<br />
* [[How to Setup Reports to Show Bender Plus Adjusted Data]]<br />
* [[How to Adjust the VTube License Type in the Config File]]<br />
* How to [[Set the Number of Values Beyond the Decimal for VTube]]<br />
* How to [[Change the VTube User Interface Language]]<br />
* [[How to find the VTube configuration files]]<br />
* [[How to BACKUP and RESTORE VTube configuration files]]<br />
* How to [[Change the default linear units in VTube]]<br />
* How to [[Change the Scanning Sounds in VTube-LASER]]<br />
* About [[VTube-LASER Cylinder Fit Tolerances]]<br />
* About [[Tube and Pipe Selection Table Backup]]<br />
<br />
===How To Use VTube===<br />
====Qualifying Tube Shapes with VTube-LASER====<br />
* About [[VTube-LASER End Point Deviations]]<br />
* [[What are Centerline Tangent Points and Why Are They Important in VTube-LASER?]]<br />
* About [[VTube Intersection Point Tolerances]]<br />
* About [[VTube End Length Offsets]]<br />
* [[The Limitations of Qualifying Tube Shapes using Bender Data]]<br />
* [[321 Plane Line Point Aligment]]<br />
<br />
====Diameter Cut Plane Topics====<br />
* Tutorial on [[How to Measure Tubes Attached to an Evaporator]]<br />
* Tutorial on [[DCP - Diameter Cut Planes]]<br />
<br />
====Scan Score====<br />
* Tutorial on [[VTube-LASER Scan Score]] - What it is for and how to use it to reduce uncertainty.<br />
<br />
====Stripe Cut Plane====<br />
*[[SCP - Stripe Cut Planes]]<br />
<br />
====Dual Cylinder Fit Topics====<br />
* Tutorial on [[DCF - Dual Cylinder Fit]]<br />
<br><br />
<br />
====Importing Data====<br />
* [[How To Import Channel-Shaped Parts]]<br />
* [[How to Import a Supravision File]]<br />
<br />
<br />
====Tutorials====<br />
* See [[How to Export to a COMCO CSV File in VTube-STEP]]<br />
* [[How to Ensure Good End Scans in VTube-LASER]]<br />
* [[How to Use Embedded Math in VTube Float Point Edit Boxes]]<br />
* [[VTube-LASER and True Position]]<br />
* [[VTube-LASER Precision Weight Control Alignment]]<br />
* [[About VTube-LASER End Angle Qualification]]<br />
* [[How To Enter LRA Data to Calculate XYZ in VTube]]<br />
* About [[VTube-LASER Nearest Pass]]<br />
* [[How To Build a STEP file from VTube-LASER]]<br />
* [[VTube-LASER and VTube-STEP - How to Reset the XYZ Radii to the Default Radius in the Part Setup Menu]]<br />
* [[How To Export VTube Reports To A Network Path]]<br />
* [[Using a Datum to Get Print Dimensions]]<br />
* [[Compare UniScan to MultiScan Measurements]]<br />
* [[How to Measure and Clock Tube Legs Coming Out of Tubes]]<br />
* What is [[VTube-LASER Wobble Deviation]]?<br />
* [[How to Clear Points from the Current Scan]]<br />
* [[Tips for Using VTube-LASER Bend Profile to Measure Bend Radii]]<br />
* About [[VTube-LASER MTA (Measured Tube Averaging)]]<br />
* About [[VTube Reverse Calc from MIL-D-9898C Absolute Bender Data to Centerline XYZ Data]]<br />
* About [[FARO Arm Types for VTube-LASER]]<br />
* About [[Building Tube Assemblies in SOLIDWORKS]]<br />
* About [[Tube Elongation Percentage]]<br />
* About [[Multi-Elongation in VTube]]<br />
* [[How to Calculate Tube Elongation Percentage in VTube-LASER]]<br />
* [[Scanning on a NEWPORT type table]]<br />
* [[Transform the Part To Make Any Bend True]]<br />
* [[Reverse the Tube Ends]]<br />
* [[Measuring Coping]]<br />
* About [[VTube-STEP and VTube-LASER Project File Compatibility]]<br />
* [[How to Create Mirror Image Part]]<br />
* [[How to Reverse Engineer with Split Bend]] (for 180 degree bends)<br />
* About [[VTube-LASER Leapfrog]]<br />
* About [[VTube-LASER Cut Planes]]<br />
* About [[Ball Probe Setup]]<br />
* About the [[FARO Version 6 Scanner]]<br />
* About the [[VTube-LASER Spike Filter]]<br />
* Read about the VTube-LASER [[Calibration-Leapfrog-Move Targets]]<br />
* Read about the [[VTube-LASER Tube Clamp]]<br />
* [[How To Calculate Cut Lengths in VTube]]<br />
* [[Windows Floating Point Setup for VTube]]<br />
* See [[VTube Overbend Calculations for Springback]]<br />
* [[VTube-LASER - End Scan Diameter Qualification Tolerance]]<br />
* Read about measuring [[VTube Rectangular Tubes]]<br />
* See the list of [[VTube-LASER Advantages]]<br />
* [[How to Measure a short end-straight with a flange]]<br />
* Explain [[Sigma]] as it relates to errors.<br />
* [[End-Scan Technique Research]]<br />
* [[Surface Coating for LASER Scanning]]<br />
* [http://www.advancedtubular.com/vtube-laser/VTube-LASER_Measuring_Copper_Tube.pdf Technical Document]: How to Measure Copper Tube with a FARO Edge Scanner<br />
* How to [[Convert from TubeCalc Elongation to VTube Elongation]]<br />
* [[VTube-LASER Model Colors]]<br />
* [[Best-Fit Alignment Versus Hard-Point Alignment]]<br />
* How to [[Measure Large Diameter Tubing]]<br />
* How to [[Import the Split Bend with STEP Version of "VTube-LASER Demo CAD Model 2"]]<br />
* See how CAM2 can work with VTube-LASER to measure components around tube shapes. See [[FARO CAM2]]<br />
* See [[Exporting STEP models in VTube-LASER]]<br />
<br />
<br><br />
<br />
==VTube Related Program IDs Used for Licensing==<br />
<br />
<br />
{| border="0" cellpadding="5" cellspacing="0" align="none" width=400<br />
|-<br />
! style="background:#a1b9eb;"|PID<br />
! colspan="2" style="background:#afa2ea;" | Program Licensed<br />
|-<br />
| 354<br />
| VTube-STEP<br />
|-<br />
| 356<br />
| VTube-LASER<br />
|-<br />
| 360<br />
| VTube-LASER Programmer<br />
|}<br />
<br />
<br><br />
<br />
== Executive Summary ==<br />
<table><br />
<tr><br />
<td width=500><br />
VTube-LASER uses the laser scanner and/or ball probe to:<br />
<br />
[[image:faro_edge_scanning_tube_unison.png|300px|right]]<br />
# Measure tube, pipe, and wire shapes<br />
# Qualify the shape or path of the part based on centerline tolerances<br />
# Correct bending machines<br />
# Reverse-engineer existing parts<br />
# Print reports<br />
# Quickly import and export tube data from other software<br />
# Remove the need for tube fixtures and gauges to qualify parts.<br />
<br><br />
<br />
==Example VTube-LASER Clients and Applications==<br />
<br />
<table><br />
<br />
<tr><br />
<td width=200><br />
==='''Airlines'''===<br />
VTube-LASER is used by British Airways to measure tube from planes for retrofit. See the [http://blog-uk.faro.com/2014/10/faro-assists-unison-in-british-airways-project/ FARO blog] for details of the British Airways application.<br><br><br />
VTube-LASER is also used at US-based airlines for the same purpose.<br />
</td><br />
<td width=300><br />
[[image:britishairways_747_pixabay.png|300px|link=http://blog-uk.faro.com/2014/10/faro-assists-unison-in-british-airways-project/]]<br><br><br />
[[image:deltajet.png|300px]]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width=200><br />
<br />
==='''Aerospace'''===<br />
VTube-LASER is used to inspect tubes for military drones. The tubes are aluminum, titanium, or inconel. Sometimes these tubes are longer than the reach of the arm, so this customer uses the [[VTube-LASER Leapfrog]] capability.<br />
</td><br />
<td width=300><br />
[[image:predator_drone.png|300px]]<br><br><br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width=200><br />
<br />
==='''Excavators'''===<br />
VTube-LASER is used to check the hydraulic lines for excavators. The tubes usually have baked-on yellow or black paint.<br />
</td><br />
<td width=300><br />
[[image:komatsu_excavators.png|300px]]<br><br><br />
</td><br />
</tr><br />
<br />
<br />
<tr><br />
<td width=200><br />
<br />
==='''Truck Frames'''===<br />
VTube-LASER is used to measure pre-hydroformed truck frames to adjust benders so that the pipe fits into pre-crush presses.<br />
</td><br />
<td width=300><br />
[[image:metalsa_truck_frame.png|300px]]<br><br><br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width=200><br />
<br />
==='''Truck Fuel and Brake Lines'''===<br />
VTube-LASER is used to measure tube for the large truck industry. This customer replaced a MM5000 measuring center with a FARO-VTube-LASER system to adjust a bank of benders that are connected directly to VTube-LASER.<br />
</td><br />
<td width=300><br />
[[image:paccar_trucks.png|300px]]<br><br><br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width=200><br />
<br />
==='''Mining'''===<br />
VTube-LASER measures tubes for the mining industry. This customer measures very long large diameter pipe on the shop floor.<br />
</td><br />
<td width=300><br />
[[image:mining_industry.png|300px]]<br><br><br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width=100><br />
<br />
==='''Undersea Oil'''===<br />
VTube-LASER is used to measure tubing that surrounds undersea oil caps with hundreds of hydraulic lines.<br />
</td><br />
<td width=300><br />
[[image:undersea_oilcap_christmastree.png|300px]]<br><br><br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
===Some Key Features of VTube-LASER===<br />
<table><br />
<tr cellpadding=10><br />
<td width=300 VALIGN="top"><br />
==== Benefit 1 - Super Quick Project Setup ====<br />
Other measurement programs are often more generic in their approach to geometry. In order to measure a tube, it is necessary to build up individual elements and create a script for the process.<br><br><br />
Because VTube assumes that you will be measuring a tube shape, the project setup is very quick and easy - saving hundreds of steps required in other programs.<br />
</td><br />
<td width=300 VALIGN="top"><br />
[[image:Vtube-laser_xyzmaster.jpg|250px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<table><br />
<tr cellpadding=10><br />
<td width=300 VALIGN="top"><br />
<br />
==== Benefit 2 - Built-in Automated Process for Measuring Tubes ====<br />
You don't have to guess at the order of the steps to measure a tube. When you measure a tube with VTube, the methods for gathering the information and calculating the centerline, intersection points, and bend data are preprogrammed as a series of consistent steps that never change and never have to be scripted.<br><br><br />
VTube knows what you should give it, and it will always request that data in order using the Measure a Tube control window.<br><br><br />
</td><br />
<td width=300 VALIGN="top"><br />
[[image:Vtube-laser_measureatube_control1.png|250px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<table><br />
<tr><br />
<td width=300><br />
<br />
==== Benefit 3 - Built in Feedback to Increase Confidence in the Data ====<br />
VTube-LASER has special procedures that help anticipate the level of confidence you will have in the incoming data. There are series of crosschecks just for measuring tubing, both mathematical and on-screen, that allow users to know if the data is good. <br><br><br />
For example, the Cylinder Fit Data window shows the accuracy of the centerline calculated from cylinder points by reporting the X and Y wobble deviations.<br />
<br />
</td><br />
<td width=300 VALIGN="top"><br />
[[image:Vtube-laser_cylinderfitwindow12.jpg|250px]]<br><br />
</td><br />
</tr><br />
</table><br />
<br />
<table><br />
<tr><br />
<td width=300><br />
<br />
==== Benefit 4 - Built-in Bender Correction ====<br />
VTube-LASER knows how to correct benders - and has special menus and procedures for doing that well.<br><br><br />
See a [http://advancedtubular.com/vtube-laser-benders/ list of benders for communication]<br />
</td><br />
<td width=300 VALIGN="top"><br />
[[image:Vtube-laser_benderlist.jpg|200px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
==Other Pages==<br />
<br />
* [http://www.advancedtubular.com/vtube-laser.htm VTube-LASER Home Web Page]<br />
* Read the [[VTube End-user License Agreement]]<br />
* Recommended [[CAD Conversion Tools]]<br />
* [[Measuring Center Accessories]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:23:21Z<p>Mcone: /* Download the Deactivation Program */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__TOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====6) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====7) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (VTube is not running)=<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
[[image:vtube_browser_deac.png|500px]]<br />
<br />
====2) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====3) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====4) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
= Download the Deactivation Program=<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
You can also [https://www.advancedtubular.com/vtube-laser/VTubeDeactivate.exe download] the deactivation program to run without the VTube software installed.<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:23:00Z<p>Mcone: /* Download the Deactivation Program */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__TOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====6) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====7) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (VTube is not running)=<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
[[image:vtube_browser_deac.png|500px]]<br />
<br />
====2) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====3) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====4) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
= Download the Deactivation Program=<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
You can also [https://wwww.advancedtubular.com/vtube-laser/VTubeDeactivate.exe download] the deactivation program to run without the VTube software installed.<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:22:31Z<p>Mcone: /* Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (VTube is not running) */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__TOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====6) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====7) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (VTube is not running)=<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
[[image:vtube_browser_deac.png|500px]]<br />
<br />
====2) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====3) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====4) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
= Download the Deactivation Program=<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
You can also [download https://wwww.advancedtubular.com/vtube-laser/VTubeDeactivate.exe] the deactivation program to run without the VTube software installed.<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:19:11Z<p>Mcone: /* Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (not running) */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__TOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====6) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====7) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (VTube is not running)=<br />
<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
[[image:vtube_browser_deac.png|500px]]<br />
<br />
====2) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====3) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====4) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:18:42Z<p>Mcone: </p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__TOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====6) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====7) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (not running)=<br />
<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
[[image:vtube_browser_deac.png|500px]]<br />
<br />
====2) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====3) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====4) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:18:11Z<p>Mcone: /* 2) Run the VTube License Deactivation Program */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__NOTOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====6) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====7) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (not running)=<br />
<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
[[image:vtube_browser_deac.png|500px]]<br />
<br />
====3) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====4) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====5) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/File:Vtube_browser_deac.pngFile:Vtube browser deac.png2023-02-28T02:17:32Z<p>Mcone: </p>
<hr />
<div></div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:16:59Z<p>Mcone: /* STEPS */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__NOTOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====6) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====7) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (not running)=<br />
<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
[[image:vtube_browser_deac.png|500px]]<br />
<br />
====2) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====3) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====4) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====5) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:15:32Z<p>Mcone: /* STEPS */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__NOTOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====6) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====7) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (not running)=<br />
<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
<br />
====2) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====3) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====4) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====5) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:15:07Z<p>Mcone: /* 6) Deactivation Successful! */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__NOTOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====6) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====7) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (not running)=<br />
<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
<br />
====2) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====5) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====6) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:14:58Z<p>Mcone: /* 5) Press YES to confirm twice. */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__NOTOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====6) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====6) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (not running)=<br />
<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
<br />
====2) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====5) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====6) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:14:44Z<p>Mcone: /* 4) Press the blue Deactivate button. */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__NOTOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====5) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====6) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (not running)=<br />
<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
<br />
====2) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====5) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====6) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:14:23Z<p>Mcone: /* 3) Press Continue */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__NOTOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====5) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====6) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (not running)=<br />
<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
<br />
====2) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====5) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====6) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:13:34Z<p>Mcone: /* STEPS */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__NOTOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====5) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====6) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (not running)=<br />
<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
<br />
====2) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====3) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====4) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====5) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====6) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:13:09Z<p>Mcone: /* STEPS */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__NOTOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====6) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
==== 7) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (not running)=<br />
<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
<br />
====2) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====3) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====4) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====5) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
====6) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/Deactivating_Internet_LicensesDeactivating Internet Licenses2023-02-28T02:12:24Z<p>Mcone: /* Steps to Deactivate Internet License for a Workstation */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=400><br />
[[image:vtube-step_logo_1.96.png|150px]] [[image:vtube-laser_logo_1.96.png|150px]]<br />
* Back to [[VTube-STEP]]<br />
* Back to [[VTube-LASER]]<br />
* Back to [[How to Activate VTube Licenses]]<br />
<br />
</td><br />
<td width=300><br />
</td><br />
</tr><br />
</table><br />
<br />
__NOTOC__<br />
<br />
<br />
= Steps to Deactivate Internet License for a Workstation From INSIDE VTube-LASER=<br />
<br />
<br />
In order to use the same USB key on a different computer, the first activation will need to be DEACTIVATED. The software can only be active on one computer at a time.<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
[[image:vtube_deac1.png|500px]]<br />
<br />
====2) Go to the License Tab====<br />
[[image:vtube_deac2.png|500px]]<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====6) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
==== 7) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
= Steps to Deactivate Internet License for a Workstation From OUTSIDE VTube-LASER (not running)=<br />
<br />
<br />
<table><br />
<br />
<tr><br />
<td width=300><br />
===STEPS===<br />
<br />
====1) Go to System Options====<br />
Use a File Explorer to browse to the VTube program folder. Inside that folder, find the VTube deactivate program. This is a separate exe program that can be run outside of VTube.<br />
<br />
====3) Run the VTube License Deactivation Program====<br />
[[image:vtube_deac3.png|500px]]<br />
<br />
====4) Press Continue====<br />
[[image:vtube_deac4.png|500px]]<br />
<br />
====5) Press the blue Deactivate button.====<br />
[[image:vtube_deac5.png|500px]]<br />
<br />
====6) Press YES to confirm twice.====<br />
[[image:vtube_deac6.png|500px]]<br />
[[image:vtube_deac7.png|500px]]<br />
<br />
==== 7) Deactivation Successful!====<br />
[[image:vtube_deac8.png|500px]]<br />
<br />
<td><br />
<br />
</td><br />
</tr><br />
<tr><br />
<td width=300><br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
==Other Pages==<br />
<br />
* Back to the [[VTube-STEP]] page<br />
* Back to the [[VTube-LASER]] page<br />
* Back to [[How to Activate VTube Licenses]]</div>Mconehttp://www.advancedtubular.wiki/index.php/VTube-LASER_Videos_for_HEXAGON_ROMERVTube-LASER Videos for HEXAGON ROMER2023-02-24T20:16:34Z<p>Mcone: /* Version 4 */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=300><br />
<br />
See a list of VTube-LASER videos for ROMER Absolute Arms from HEXAGON on this page.<br><br><br />
* Back to [[VTube-LASER]] Knowledgebase Page<br><br />
* Back to the [[VTube-LASER Videos]] Page<br><br><br />
</td><br />
<td width=300><br />
[[image:VTube-LASER_Videos_HEXAGON_ROMER.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
__NOTOC__<br />
<br />
<br />
<br />
<br />
<br />
<br />
===Version 4===<br />
<br />
====Video 20230224: Proper End Straight Scanning Ensures Correct End Point Locations ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone, the lead developer for VTube-LASER shows how to get reliable end point locations from proper end straight scanning techniques.<br />
<td width=200><br />
[[image:vtl_v4_ProperEndStraightScanningForGoodEndPoints.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230224_TutorialForProperEndStraightScanning.mp4 MP4]<br />
* View video [https://vimeo.com/802070332 Vimeo]<br />
* View video [https://youtu.be/p_ZVOR4DDC8 YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230206: How to learn, test, and use the DCP (Diameter Cut Plane) to measure tube straights that are near other objects ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to learn, test, and use the DCP feature to measure tubes that run near other objects.<br />
<td width=200><br />
[[image:vtl_v4_DCPTutorial.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230206_DiameterCutPlaneTutorial.mp4 MP4]<br />
* View video [https://vimeo.com/796424925 Vimeo]<br />
* View video [https://youtu.be/CLcExwN-pTA YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220908: Sneak Peek Preview - Shallow Bend Logic in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Shallow Bend logic coming in version 4 of VTube-LASER which increases bend point location placement by up to 10 times.<br />
<td width=200><br />
[[image:vtl_v4_ShallowBendVideo_v2c.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220906_VTube-LASER_v4_ShallowBendMeasureLogic.mp4 MP4]<br />
* View Video [https://vimeo.com/747812907 Vimeo]<br />
* View Video [https://youtu.be/ZosWxq4A4NU YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.2===<br />
<br />
====Video 20220629: How Set Up to Correct SMI Benders with VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows set up VTube-LASER to correct SMI benders.<br />
<td width=200><br />
[[image:vtl_v3.2_SMIBenderCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220629_VTube-LASER_SMI_Corrections.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220513: How To Measure Square Tube with VTube-LASER and the HEXAGON Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import square models, then measure, correct tube benders, and qualify square tube shapes using a HEXAGON scan arm and VTube-LASER.<br />
<td width=200><br />
[[image:vtl_v3.2b755_SquareTubeVideo_Hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220513_VTube-LASER_MeasureSquare_HEXAGON_ScanArm.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.<br />
<td width=200><br />
[[image:vtl_v3.2b750_CNCBenderBenderlinkVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220421_VTube-LASER_to_CNC_Bender_Communications_Setup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220331: Improved Best Fit For Shallow Bends====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how this version of VTube-LASER has an improved Best Fit algorithm designed to handle tubes with shallow bends.<br />
<td width=200><br />
[[image:vtl_v3.2b714_BestFitShallowBend.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220331_v3.2_b714_BestFitShallowBendLogic.mp4 MP4]<br />
* View [https://vimeo.com/694643426 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.1===<br />
<br />
====Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to calculate tube elongation percentage with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20220113_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_training%20video%2015%20-%20How%20to%20Calculate%20the%20Tube%20Elongation%20Percentage.mp4 MP4]<br />
* View [https://vimeo.com/665826780 Vimeo]<br />
* View [https://youtu.be/a0bc6IpbWb0 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
====Video 20211207: VTube-LASER Correction for Han Jie Benders====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638)<br />
<br />
<td width=200><br />
[[image:20211207_VTube-LASER_to_HanJie_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER_HanJie_Promotional.mp4 MP4]<br />
* View [https://vimeo.com/654364120 Vimeo]<br />
* View [https://youtu.be/ym8LbFUpyow YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===Version 3.0===<br />
<br />
====Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)<br />
<br />
<td width=200><br />
[[image:20210702_TangentPointEntryGrid.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_b555_tangent_point_entry_grid.mp4 MP4]<br />
* View [https://vimeo.com/571874446 Vimeo]<br />
* View [https://youtu.be/C9yLbhoWlSE YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021)<br />
<br />
<td width=200><br />
[[image:20210622_End_Scan_Flier_Filter_Promo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_endscanflierfilter_promo.mp4 MP4]<br />
* View [https://vimeo.com/567104555 Vimeo]<br />
* View [https://youtu.be/RfWxFa6fEFk YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210505: How To Determine Positive and Negative Rotation Directions====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube.<br />
<br />
<td width=200><br />
[[image:20210505_Positive_Rotation_Direction.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_positive_rotation_direction.mp4 MP4]<br />
* View [https://vimeo.com/545519786 Vimeo]<br />
* View [https://youtu.be/CL7L-rZbVDQ YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210503: Automatic Reverse Calc====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513.<br />
<br />
<td width=200><br />
[[image:20210503_AutomaticReverseCalcVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vt_v3_b513_automatic_reverse_calc.mp4 MP4]<br />
* View [https://vimeo.com/545518519 Vimeo]<br />
* View [https://youtu.be/-rh5eNA8tIA YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210421: Why and How to Use MTA (Measured Tube Averaging)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows the why and how of MTA.<br />
<br />
<td width=200><br />
[[image:20210421_MTAVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_mta_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/541156704 Vimeo]<br />
* View [https://youtu.be/gGSAR-a6m3Q YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100413: VTube v3 NPS Values Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how to use the new NPS values in VTube.<br />
<br />
<td width=200><br />
[[image:20210413_NPSVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_nps_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/536497747 Vimeo]<br />
* View [https://youtu.be/RcKawANCpWY YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100406: VTube-LASER Reverse Engineering Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210406_ReverseEngineeringVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_reverse_engineering_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/533692712 Vimeo]<br />
* View [https://youtu.be/7N_-0d_Mjp4 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210330: VTube-LASER to Transfluid Bender Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to communicate with Transfluid tProject bender software.<br />
<br />
<td width=200><br />
[[image:20210330_TransfluidTProjectCommunications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_transfluid_tproject_communications.mp4 MP4]<br />
* View [https://vimeo.com/531073455 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210313: How to Enter Bender Data of Different Types in the Same Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data.<br />
<br />
<td width=200><br />
[[image:20210313_ImportMixedBenderData.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_entering_mixed_bender_data_types.mp4 MP4]<br />
* View [https://vimeo.com/523279713 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210310: How to Import New Report Templates====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import new report templates into VTube-STEP and VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210310_ImportReportTemplates.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_importingreporttemplates.mp4 MP4]<br />
* View [https://vimeo.com/522027683 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes.<br />
<br />
<td width=200><br />
[[image:20201221_UTESelectCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_UTE_Select_Corrections_Hexagon.mp4 MP4]<br />
* View [https://vimeo.com/493550553 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights.<br />
<br />
<td width=200><br />
[[image:20201111B_autocopydefaulttolerance.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_automatic_copy_of_default_tolerance.mp4 MP4]<br />
* View [https://vimeo.com/478271550 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges.<br />
<br />
<td width=200><br />
[[image:20201111_precisionweightcontrolalignment.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_precision_weight_control_alignment.mp4 MP4]<br />
* View [https://vimeo.com/478127038 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm.<br />
<br />
<td width=200><br />
[[image:20200930_measuring_od_end_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_qualifying_endscan_profiles_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/463607514 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports_hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/461988796 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner.<br />
<br />
<td width=200><br />
[[image:20200722_RA7520_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* Download [https://vimeo.com/440788274 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_ra-7520_SI_ScanningTube.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200709: Real-time Overall Scan Scores Build Confidence====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how VTube-LASER scan scoring system helps users know they are measuring well.<br />
<br />
<td width=200><br />
[[image:20200709_scanscore_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_realtime_scanscore.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200609: How to Use Multiple Versions of the Same Part in One Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to create multiple versions of the same part in one project. Each version can then be used to measure the part at various stages of the fabrication process.<br />
<br />
<td width=200><br />
[[image:20200609_multiple_versions_parts_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_multiple_versions_of_same_part.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200515: How Import 180-degree Bend Models====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models with 180-degree bends.<br />
<br />
<td width=200><br />
[[image:20200515_import180_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_import_180-degree_bend_models.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200514: How to Change Languages in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to change languages in the VTube-LASER and VTube-STEP user interface.<br />
<br />
<td width=200><br />
[[image:20200514_changelanguges_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_change_languages.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar.<br />
<br />
<td width=200><br />
[[image:20200331_training_hexagon_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402756704 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402756704/45b8f394d8 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl3_verify_hexagon_with_cyl_length_bar.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200320: VTube UNIVERSITY Training Video: End Scans====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_training_endscan_technique.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399358340 Vimeo]<br />
* View [https://youtu.be/qb9G15eQGpk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200320_VTubeUniversity_vtl_v3_endscan_technique_rev2.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200309: Corrections with the OMCG Wire Bender====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a corrections loop between VTube-LASER and an OMCG wire bender.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_correct_OMCG.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://youtu.be/xFtyRToRwFY YouTube]<br />
* View [https://vimeo.com/396590418 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200306_VTube-LASER_to_OMCG_Corrections_at_Ohio_Precision_Products.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
You can manually setup the Ethernet port following the steps in this short video.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_setupethnernetHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20200225_vtl_v3_Windows10_Ethernet_Setup_For_HEXAGON_RDS.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Switching from probe to laser is easy with the three-way toggle button.<br />
<br />
(Using a HEXAGON RA8 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_switchingprobesHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389798661 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200206_vtl_v3.0_how%20to%20switch%20from%20ball%20to%20laser%20in%20HEXAGON%20RS8%20Arms.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.21===<br />
<br />
<br />
====Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE. <br />
<br />
(Using a HEXAGON 8325 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles_002.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/384896663 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.21_cornerprofile_demo_2.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 107: Corrections Loop with SOCO Beckhoff Controls====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_soco_beckhoff_communications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/356003359 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_SOCO_SV-M_Protocol.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.19===<br />
<br />
====Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_different_tube_types_scanned.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332490313 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_quickscan_multiple_part_types.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_timer_accept_button.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332124282 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_accepttimer.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.18===<br />
<br />
====Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_calculate_true_radius_180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.18_measure_180_degree_bend_radius.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_reverse_RZR_side_by_side.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320630910 Vimeo]<br />
* View [https://youtu.be/Qpn8Iyl_RwU YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_reverse_rzr_side_by_side.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 98: About the Small Diameter Warning ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how Small Diameter Warning works along with its setup.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_small_diameter_warning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320355578 Vimeo]<br />
* View [https://youtu.be/uT_PN-lNsz8 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-step/vtube_v2.9.18_minimum_diameter_warning.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 96: VTube-STEP and VTube-LASER New Radius Features ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See the new radius features in this video. In Part Setup:<br />
* Renamed "Radius 1" (renamed from Default Radius)<br />
* New "Radius 2" field<br />
* New "Radius 3" field<br />
<br><br />
In Parametric Tube grid windows:<br><br />
* See how to quickly set the radii for all bends using the synchronize radius feature.<br />
<br />
</td><br />
<td width=200><br />
[[image:vtube_v2.9.18.video_newradius_features.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/317137310 Vimeo]<br />
* View [https://youtu.be/DN_bhnMWCPI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.18_new_syncradlevels.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer ====<br />
<br />
Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.18.video_RbSABendPro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/315983373 Vimeo]<br />
* View [https://youtu.be/RLCXQt34Alw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_bendpro_communications.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.17===<br />
<br />
<br />
====Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_hexagon_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309191006 Vimeo]<br />
* View [https://youtu.be/kRwrjV9AqZA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_hexagon_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.16===<br />
<br />
====Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER ====<br />
<br />
This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.16._attach_and_use_RA8_scanner.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/298226309 Vimeo]<br />
* View [https://youtu.be/GQnAAGLJ-Sc YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.16_ROMER8_HowToAttachAndUseScanner.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.10===<br />
<br />
====Video 86: VTube-LASER's LASER SCAN FILTER SOUND ====<br />
<br />
This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.10._laserscanfilter_sound.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/278343562 Vimeo]<br />
* View [https://youtu.be/lAmLVzMHatw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_romer_laserscanfilter_sound.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 84: Measuring Convoluted Tube and Wire with VTube-LASER ====<br />
<br />
This video shows VTube-LASER's ability to measure extremely convoluted parts with a ROMER Absolute Arm with Integrated Scanner. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_convoluted_tube_and_wire_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/277725088 Vimeo]<br />
* View on [https://youtu.be/ZkZm3bFHzog YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_convoluted_tube_wire_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.4===<br />
<br />
====Video 78: VTube-LASER Corrects an SMT Bender Using a ROMER Absolute Arm ====<br />
<br />
This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.4_smtcorrection_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/256176430 Vimeo]<br />
* View on [https://youtu.be/Me3l7Ob45tQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl%20smtvideo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2===<br />
<br />
====Video 2: SCANNING SPEED TEST ON TWO TYPES OF TUBES ====<br />
<br />
<table width=600><br />
<tr><br />
<td width=300><br />
This video shows speed tests on two very different kinds of tube shapes:<br><br><br />
<br />
# An Exhaust Pipe<br><br><br />
# A copper HVAC tube with two 180-degree bends</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.2_romer_speed_test_video.png|300px]]<br><br />
</td><br />
<td width=200><br />
* View on [https://vimeo.com/245475657 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.2_romer_speed_tests.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br />
<br />
====Video 1: INTRODUCING VTUBE-LASER MEASURING WITH A ROMER ABSOLUTE ARM ====<br />
<br />
<table width=600><br />
<tr><br />
<td width=300><br />
As of November 1, 2017, VTube-LASER can measure tubes with ROMER Absolute Arms from HEXAGON. This video shows a measurement of a tube using a 3.5 meter ROMER arm.</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9_First_ROMER_video.png|300px]]<br><br />
</td><br />
<td width=200><br />
* View on [https://vimeo.com/241096894 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20171102_VTube-LASER_HEXAGON_ROMER_Scanning.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br />
<br />
===Other Pages===<br />
<br />
* Back to [[VTube-LASER]]</div>Mconehttp://www.advancedtubular.wiki/index.php/VTube-LASER_VideosVTube-LASER Videos2023-02-24T20:15:44Z<p>Mcone: /* Video 20230224: Proper End Straight Scanning Ensures Correct End Point Locations */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=300><br />
<br />
See a complete list of VTube-LASER videos on this page.<br><br><br />
<br />
* Back to [https://www.advancedtubulartech.com/vtube-laser the Main VTube-LASER] web page<br><br><br />
* Back to [[VTube-LASER]] Knowledgebase Page<br><br><br />
* Note: VTube-STEP is included with every VTube-LASER installation. You can watch '''VTube-STEP videos''' in the [[VTube-STEP Videos]] page.<br><br><br />
* See [[Retired VTube-LASER Videos]]<br />
</td><br />
<td width=300><br />
[[image:vtube-laser_videos.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
__NOTOC__<br />
<br />
==Video Subpages Related to Specific Arms==<br />
Click on the images to enter the video subpages with videos for specific arms.<br><br><br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTube-LASER_Videos_HEXAGON_ROMER.png|200px|link=VTube-LASER Videos for HEXAGON ROMER]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:vtube-laser_video_FARO.png|200px|link=VTube-LASER Videos for FARO|]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos Kreon.png|200px|link=VTube-LASER Videos for Kreon]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos MicroScribe.png|200px|link=VTube-LASER Videos for MicroScribe]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
<br><br><br><br><br />
<br />
==Latest Videos==<br />
<br />
===Version 4===<br />
<br />
<br />
====Video 20230224: Proper End Straight Scanning Ensures Correct End Point Locations ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone, the lead developer for VTube-LASER shows how to get reliable end point locations from proper end straight scanning techniques.<br />
<td width=200><br />
[[image:vtl_v4_ProperEndStraightScanningForGoodEndPoints.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230224_TutorialForProperEndStraightScanning.mp4 MP4]<br />
* View video [https://vimeo.com/802070332 Vimeo]<br />
* View video [https://youtu.be/p_ZVOR4DDC8 YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230206: How to learn, test, and use the DCP (Diameter Cut Plane) to measure tube straights that are near other objects ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to learn, test, and use the DCP feature to measure tubes that run near other objects.<br />
<td width=200><br />
[[image:vtl_v4_DCPTutorial.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230206_DiameterCutPlaneTutorial.mp4 MP4]<br />
* View video [https://vimeo.com/796424925 Vimeo]<br />
* View video [https://youtu.be/CLcExwN-pTA YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230112: How to Export to Microsoft Excel from VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the different ways to export from VTube-STEP and VTube-LASER to Microsoft Excel.<br />
<td width=200><br />
[[image:vtl_v4_MicrosoftExcelVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230112_ExportingToExcel_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/789311957 Vimeo]<br />
* View video [https://youtu.be/noSSut2RMYg YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230106: Easy Fine-tuning for Bender Corrections with Correction Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to quickly reduce bender adjustments using Correction Percentage.<br />
<td width=200><br />
[[image:vtl_v4_CorrectionPercentageVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230106_VTube-LASER_v4_CorrectionPercentage.mp4 MP4]<br />
* View video [https://vimeo.com/787736630 Vimeo]<br />
* View video [https://youtu.be/deLKsd3LDU4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20221006: GD&T Perpendicularity Tutorial for End Trim Profile Measure Process====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the End Trim Profile measure process to calculate GD&T perpendicularity.<br />
<td width=200><br />
[[image:vtl_v4_EndTrimProfileMeasureVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20221005_EndTrimProfile_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/757282746 Vimeo]<br />
* View video [https://youtu.be/kQKgeSerbz8 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220927: Measuring a Can-Am Maverick Radius Rod with VTube-LASER Space Objects====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Calvin Nichoson (VTube-LASER Technician) measuring a Can-Am Maverick radius rod with VTube-LASER version 4 Space Objects.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_Can-Am.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220926_VTL_Can-AmMaverickX3LowerRadiusRod_Measure.mp4 MP4]<br />
* View video [https://vimeo.com/754344224 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220912: Sneak Peek Preview - Space Objects Feature in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Space Object feature coming in version 4 of VTube-LASER.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_v2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220912_SneakPeekPreviewSpaceObjects.mp4 MP4]<br />
* View video [https://vimeo.com/749197784 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220908: Sneak Peek Preview - Shallow Bend Logic in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Shallow Bend logic coming in version 4 of VTube-LASER which increases bend point location placement by up to 10 times.<br />
<td width=200><br />
[[image:vtl_v4_ShallowBendVideo_v2c.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220906_VTube-LASER_v4_ShallowBendMeasureLogic.mp4 MP4]<br />
* View Video [https://vimeo.com/747812907 Vimeo]<br />
* View Video [https://youtu.be/ZosWxq4A4NU YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.2===<br />
<br />
====Video 20220823: Automatic Global Configuration Backup File Location====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube making automatic backups of the Global Configuration file.<br />
<br><br><br />
The backup files ensure that you never lose the configuration of the global configuration file. If the configuration is lost, then it can be easily recovered with these files.<br />
<td width=200><br />
[[image:vtl_videoimage_backupglobalconfig.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220823_VTube_Global_Config_Backup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220819: Overview of VTube-LASER to COMCO Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows an overview of communications to the COMCO benders using VTube-LASER<br />
<td width=200><br />
[[image:vtl_videoimage_comcooverview.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220819_COMCO_Bender_Corrections_In_VTube-LASER.mp4 MP4]<br />
* See PDF [https://www.advancedtubular.com/vtube-laser/20210817-How_To_Export_CSV_from_COMCO.pdf How to Export CSV from COMCO] <br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220629: How Set Up to Correct SMI Benders with VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows set up VTube-LASER to correct SMI benders.<br />
<td width=200><br />
[[image:vtl_v3.2_SMIBenderCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220629_VTube-LASER_SMI_Corrections.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220603: How To Measure Square and Rectangular Tubing with VTube-LASER and a FARO ScanArm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how use a FARO Quantum ScanArm to measure square or rectangular tubing.<br />
<td width=200><br />
[[image:vtl_v3.2_FaroSquareTubingVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220603_vtl3.2_SquareTube_FARO.mp4 MP4]<br />
* View [https://vimeo.com/716899246 Vimeo] <br />
* View [https://youtu.be/rhohh9X3bU0 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220513: How To Measure Square Tube with VTube-LASER Using a HEXAGON Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models, measure them, correct tube benders to adjust the shape, and then qualify square tube shapes using VTube-LASER Corner Profile measure process.<br />
<td width=200><br />
[[image:vtl_v3.2b755_SquareTubeVideo_Hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220513_VTube-LASER_MeasureSquare_HEXAGON_ScanArm.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br><br />
<br />
====Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.<br />
<td width=200><br />
[[image:vtl_v3.2b750_CNCBenderBenderlinkVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220421_VTube-LASER_to_CNC_Bender_Communications_Setup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220420: Measuring 180-degree Bends with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure 180-degree bends with the Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b750_Kreon180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220420_vtl_Kreon_180-Degree_Bends_rev2.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220413: Square Tube Measuring with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows square tube measuring using a Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b744_KreonSquareTube.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220413_vtl_v3.2_kreon_square_tube.mp4 MP4]<br />
* View [https://vimeo.com/699270748 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220331: Improved Best Fit For Shallow Bends====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how this version of VTube-LASER has an improved Best Fit algorithm designed to handle tubes with shallow bends.<br />
<td width=200><br />
[[image:vtl_v3.2b714_BestFitShallowBend.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220331_v3.2_b714_BestFitShallowBendLogic.mp4 MP4]<br />
* View [https://vimeo.com/694643426 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.1===<br />
====Video 20220221-C: Aligning the Kreon Scanner in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to align the Kreon scanner to the Kreon arm in VTube-LASER before you start using the Kreon arm the first time.<br />
<br />
<td width=200><br />
[[image:kreon_video3.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_scanner_positioning_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220221-B: Controlling the Kreon Video Settings Properly ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter and control the values in the Kreon Video Settings window.<br />
<br />
<td width=200><br />
[[image:kreon_video4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_video_setup_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220221: Verifying VTube-LASER and Kreon with a Test Cylinder====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and use a test cylinder to verify your measuring system at the beginning of each day.<br />
<br />
<td width=200><br />
[[image:kreon_video2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_test_cylinder_setup.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
====Video 20220216: VTube-LASER Using a Kreon Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the connection to a Kreon ACES scan arm with a Solano blue line scanner.<br />
<br />
<td width=200><br />
[[image:kreon_video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v3.1_kreon_intro.mp4 MP4]<br />
* View [https://vimeo.com/678223398 Vimeo]<br />
* View [https://youtu.be/6o7W38-q1lU YouTube]<br />
<br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to calculate tube elongation percentage with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20220113_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_training%20video%2015%20-%20How%20to%20Calculate%20the%20Tube%20Elongation%20Percentage.mp4 MP4]<br />
* View [https://vimeo.com/665826780 Vimeo]<br />
* View [https://youtu.be/a0bc6IpbWb0 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20211207: VTube-LASER Correction for Han Jie Benders====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638)<br />
<br />
<td width=200><br />
[[image:20211207_VTube-LASER_to_HanJie_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER_HanJie_Promotional.mp4 MP4]<br />
* View [https://vimeo.com/654364120 Vimeo]<br />
* View [https://youtu.be/ym8LbFUpyow YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===Version 3.0===<br />
<br />
====Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)<br />
<br />
<td width=200><br />
[[image:20210702_TangentPointEntryGrid.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_b555_tangent_point_entry_grid.mp4 MP4]<br />
* View [https://vimeo.com/571874446 Vimeo]<br />
* View [https://youtu.be/C9yLbhoWlSE YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021)<br />
<br />
<td width=200><br />
[[image:20210622_End_Scan_Flier_Filter_Promo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_endscanflierfilter_promo.mp4 MP4]<br />
* View [https://vimeo.com/567104555 Vimeo]<br />
* View [https://youtu.be/RfWxFa6fEFk YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210505: How To Determine Positive and Negative Rotation Directions====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube.<br />
<br />
<td width=200><br />
[[image:20210505_Positive_Rotation_Direction.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_positive_rotation_direction.mp4 MP4]<br />
* View [https://vimeo.com/545519786 Vimeo]<br />
* View [https://youtu.be/CL7L-rZbVDQ YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210503: Automatic Reverse Calc====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513.<br />
<br />
<td width=200><br />
[[image:20210503_AutomaticReverseCalcVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vt_v3_b513_automatic_reverse_calc.mp4 MP4]<br />
* View [https://vimeo.com/545518519 Vimeo]<br />
* View [https://youtu.be/-rh5eNA8tIA YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210421: Why and How to Use MTA (Measured Tube Averaging)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows the why and how of MTA.<br />
<br />
<td width=200><br />
[[image:20210421_MTAVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_mta_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/541156704 Vimeo]<br />
* View [https://youtu.be/gGSAR-a6m3Q YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100413: VTube v3 NPS Values Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how to use the new NPS values in VTube.<br />
<br />
<td width=200><br />
[[image:20210413_NPSVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_nps_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/536497747 Vimeo]<br />
* View [https://youtu.be/RcKawANCpWY YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100406: VTube-LASER Reverse Engineering Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210406_ReverseEngineeringVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_reverse_engineering_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/533692712 Vimeo]<br />
* View [https://youtu.be/7N_-0d_Mjp4 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210330: VTube-LASER to Transfluid Bender Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to communicate with Transfluid tProject bender software.<br />
<br />
<td width=200><br />
[[image:20210330_TransfluidTProjectCommunications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_transfluid_tproject_communications.mp4 MP4]<br />
* View [https://vimeo.com/531073455 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210313: How to Enter Bender Data of Different Types in the Same Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data.<br />
<br />
<td width=200><br />
[[image:20210313_ImportMixedBenderData.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_entering_mixed_bender_data_types.mp4 MP4]<br />
* View [https://vimeo.com/523279713 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210310: How to Import New Report Templates====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import new report templates into VTube-STEP and VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210310_ImportReportTemplates.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_importingreporttemplates.mp4 MP4]<br />
* View [https://vimeo.com/522027683 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210212: Switch the FARO Scanner ON and OFF Manually====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Use this process to quickly switch the FARO scanner on or off manually.<br />
<br />
<td width=200><br />
[[image:20210212_FARO_Scanner_ONOFF.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_20210212_FARO_Scanner_Laser_On_Off.mp4 MP4]<br />
* View [https://vimeo.com/511726559 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes.<br />
<br />
<td width=200><br />
[[image:20201221_UTESelectCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_UTE_Select_Corrections_Hexagon.mp4 MP4]<br />
* View [https://vimeo.com/493550553 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201117: Calculate Centerline Radii Using Measure Bend Profile (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Quickly and accurately measure the centerline radius using the Measure Bend Profile process.<br />
<br />
<td width=200><br />
[[image:20201117_measurebendprofile_bendradii.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_bend_profile_scan_for_radius_faro.mp4 MP4]<br />
* View [https://vimeo.com/480569055 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights.<br />
<br />
<td width=200><br />
[[image:20201111B_autocopydefaulttolerance.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_automatic_copy_of_default_tolerance.mp4 MP4]<br />
* View [https://vimeo.com/478271550 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges.<br />
<br />
<td width=200><br />
[[image:20201111_precisionweightcontrolalignment.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_precision_weight_control_alignment.mp4 MP4]<br />
* View [https://vimeo.com/478127038 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm.<br />
<br />
<td width=200><br />
[[image:20200930_measuring_od_end_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_qualifying_endscan_profiles_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/463607514 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports_hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/461988796 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200923: How to Measure and Qualify Ports on a Tube Using Assembly (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_faro.mp4 MP4]<br />
* View [https://vimeo.com/461239022 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200804: Measuring a Brake Line with a FARO EDGE Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER measuring a brake line with a legacy FARO Edge Scan Arm.<br />
<br />
<td width=200><br />
[[image:2020804_Brake_Line_FAROEdge.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_faro_edge_brake_line.mp4 MP4]<br />
* View [https://vimeo.com/444720352 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner.<br />
<br />
<td width=200><br />
[[image:20200722_RA7520_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/440788274 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_ra-7520_SI_ScanningTube.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200709: Real-time Overall Scan Scores Build Confidence (HEXAGON RA8)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how VTube-LASER scan scoring system helps users know they are measuring well.<br />
<br />
<td width=200><br />
[[image:20200709_scanscore_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_realtime_scanscore.mp4 MP4]<br />
* View [https://vimeo.com/437000592 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200609: How to Use Multiple Versions of the Same Part in One Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to create multiple versions of the same part in one project. Each version can then be used to measure the part at various stages of the fabrication process.<br />
<br />
<td width=200><br />
[[image:20200609_multiple_versions_parts_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_multiple_versions_of_same_part.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
====Video 20200515: How Import 180-degree Bend Models====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models with 180-degree bends.<br />
<br />
<td width=200><br />
[[image:20200515_import180_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_import_180-degree_bend_models.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 20200514: How to Change Languages in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to change languages in the VTube-LASER and VTube-STEP user interface.<br />
<br />
<td width=200><br />
[[image:20200514_changelanguges_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_change_languages.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200406: Measure Corner Profile with VTube-LASER and FARO Quantum====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure a corner profile shape with the Corner Profile measure process using a FARO Quantum arm.<br />
<br />
<td width=200><br />
[[image:20200406_cornerprofile_faro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/404834117 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/404834117/b97d3500e3 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200406_vtl3_cornerprofile_faro_quantum.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar.<br />
<br />
<td width=200><br />
[[image:20200331_training_hexagon_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402756704 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402756704/45b8f394d8 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl3_verify_hexagon_with_cyl_length_bar.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200327: VTube UNIVERSITY Training Video: Introduction to Import and Measuring Tube Shape Demo Tube 5 with a FARO Arm====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to accompany training document 20200327..002" [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:20200327_trainingdoc002_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402035686 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402035686/bdbb6da5fe Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_Intro_To_Import_And_Measure_VTube-LASER_with_FARO_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200323: VTube UNIVERSITY Training Video: FARO Account Manager Demo Training====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to demonstrate VTube-LASER using a FARO ScanArm.<br><br><br />
This video is a supplement to the demo training document available on [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:vtl_v3.0_training_faro_demonstration.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399899513 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/399899513/aa54eece37 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_demonstrating_vtube-laser_with_faro_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200320: VTube UNIVERSITY Training Video: End Scans====<br />
(HEXAGON RA8-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_training_endscan_technique.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399358340 Vimeo]<br />
* View [https://youtu.be/qb9G15eQGpk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200320_VTubeUniversity_vtl_v3_endscan_technique_rev2.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200306: VTube-LASER Correction of an OMCG Wire Bender====<br />
(HEXAGON RA7-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a corrections loop between VTube-LASER and an OMCG wire bender.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_correct_OMCG.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://youtu.be/xFtyRToRwFY YouTube]<br />
* View [https://vimeo.com/396590418 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200306_VTube-LASER_to_OMCG_Corrections_at_Ohio_Precision_Products.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
You can manually setup the Ethernet port following the steps in this short video.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_setupethnernetHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20200225_vtl_v3_Windows10_Ethernet_Setup_For_HEXAGON_RDS.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Switching from probe to laser is easy with the three-way toggle button.<br />
<br />
(Using a HEXAGON RA8 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_switchingprobesHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389798661 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200206_vtl_v3.0_how%20to%20switch%20from%20ball%20to%20laser%20in%20HEXAGON%20RS8%20Arms.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.21===<br />
<br />
====Video 20200204: How to Measure a Bend Radius with Bend Profile Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Bend Profile measure process to measure a bend radius.<br />
<br />
(Using a FARO Quantum ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.21_bendprofilescan_faroquantum.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389291065 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_bendprofilescan_faroquantum.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE. <br />
<br />
(Using a HEXAGON 8325 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles_002.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/384896663 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.21_cornerprofile_demo_2.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 110: Corner Profile Measure Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER can easily measure corner profiles.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/360026684 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 107: Corrections Loop with SOCO Beckhoff Controls====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_soco_beckhoff_communications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/356003359 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_SOCO_SV-M_Protocol.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.20===<br />
<br />
====Video 105: Measuring a Part with 180-Degree Bends====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows VTube-LASER scanning through a part with two 180-degree bends.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.20.video_hvac_dual180.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/345144160 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.20_hvac_dual_split_bend_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.19===<br />
<br />
====Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_different_tube_types_scanned.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332490313 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_quickscan_multiple_part_types.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_timer_accept_button.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332124282 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_accepttimer.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 102: VTube-LASER is Now Compatible with Baces USB Arms====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER working with a Baces USB arm. <br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_baces_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/329690049 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_BacesArmDemo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.18===<br />
<br />
====Video 101: How Automatic Laser Separation for UniScan Makes Scanning Tubes Easier (HEXAGON Arm)====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the Automatic Laser Separation feature introduced in version 2.9.18 on March 15, 2018.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_automatic_laser_separation_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/324467076 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.18_automatic_laser_separation_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_calculate_true_radius_180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.18_measure_180_degree_bend_radius.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_reverse_RZR_side_by_side.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320630910 Vimeo]<br />
* View [https://youtu.be/Qpn8Iyl_RwU YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_reverse_rzr_side_by_side.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 98: About the Small Diameter Warning ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how Small Diameter Warning works along with its setup.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_small_diameter_warning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320355578 Vimeo]<br />
* View [https://youtu.be/uT_PN-lNsz8 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-step/vtube_v2.9.18_minimum_diameter_warning.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 96: VTube-STEP and VTube-LASER New Radius Features ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See the new radius features in this video. In Part Setup:<br />
* Renamed "Radius 1" (renamed from Default Radius)<br />
* New "Radius 2" field<br />
* New "Radius 3" field<br />
<br><br />
In Parametric Tube grid windows:<br><br />
* See how to quickly set the radii for all bends using the synchronize radius feature.<br />
<br />
</td><br />
<td width=200><br />
[[image:vtube_v2.9.18.video_newradius_features.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/317137310 Vimeo]<br />
* View [https://youtu.be/DN_bhnMWCPI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.18_new_syncradlevels.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.17===<br />
<br />
====Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer ====<br />
<br />
Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.18.video_RbSABendPro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/315983373 Vimeo]<br />
* View [https://youtu.be/RLCXQt34Alw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_bendpro_communications.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_hexagon_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309191006 Vimeo]<br />
* View [https://youtu.be/kRwrjV9AqZA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_hexagon_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 93: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the FARO QUANTUM SCANARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_faro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309031852 Vimeo]<br />
* View [https://youtu.be/mt3Wn30EQIs YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_faro_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 92: Measuring part "VTube-LASER Demo 5" with MicroScribe in Version 2.9.17 ====<br />
<br />
This video shows how to measure demo part 5 with version 2.9.17 of VTube-LASER. (Released in December 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_microscribe_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/308642989 Vimeo]<br />
* View [https://youtu.be/_aZg3KpVDis YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.17_microscribe_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 91: How To Reverse-Engineer to STEP file with a FARO ScanArm Using VTube-LASER ====<br />
<br />
This video shows how to reverse-engineer a tube to STEP file. Michael Cone is using VTube-LASER 2.9.17 and a FARO Quantum S ScanArm.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_reverse_faro.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/301420583 Vimeo]<br />
* View [https://youtu.be/N9CcloLF-jQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_reverse-engineer-to-STEP.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.16===<br />
<br />
====Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER ====<br />
<br />
This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.16._attach_and_use_RA8_scanner.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/298226309 Vimeo]<br />
* View [https://youtu.be/GQnAAGLJ-Sc YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.16_ROMER8_HowToAttachAndUseScanner.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.14===<br />
<br />
<br />
====Video 89: MEASURING SMALL TUBES with MICROSCRIBE ====<br />
<br />
<table width=600><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to measure small tubes with the MicroScribe i arm using VTube-LASER.</td><br />
<td width=200><br />
[[image:VTL MicroScribe Video 4.png|300px]]<br><br />
</td><br />
<td width=200><br />
* View on [https://vimeo.com/288409692 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.14_microscribe_dual_split_bend_0.1875.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br />
<br />
===Version 2.9.12===<br />
<br />
====Video 88: VTube-LASER and VTube-STEP Unlimited NOTE LIST Feature ====<br />
<br />
This video shows the new unlimited NOTE LIST feature that allows you to add any number of notes to a VTube project.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.12_notelist_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/285420883 Vimeo]<br />
* View [https://youtu.be/N5kGhWQjFHA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.12_noteslist_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.11===<br />
<br />
====Video 87: VTube-LASER's IMPROVED SQUARE TUBE SCANNING (FARO) ====<br />
<br />
This video shows the improved square-tube scanning feature in version 2.9.11 using a FARO ScanArm.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.11_squaretubescanningfaro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/279182056 Vimeo]<br />
* View [https://youtu.be/0viGl_CnzlM YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.11_scanning_square_tube_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.10===<br />
<br />
====Video 86: VTube-LASER's LASER SCAN FILTER SOUND ====<br />
<br />
This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.10._laserscanfilter_sound.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/278343562 Vimeo]<br />
* View [https://youtu.be/lAmLVzMHatw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_romer_laserscanfilter_sound.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 85: Using VTube-LASER to Supply SOLIDWORKS with Data for Parametric Overlay ====<br />
<br />
This video shows a workflow that allows you to reverse-engineer a Y-pipe sample into SOLIDWORKS. The workflow uses a parametrically-controlled template file in SOLIDWORKS that was created to overlay the scanned-in data for an approximate match. This is an advanced topic for SOLIDWORKS users that concentrates mainly on how it is possible to handle parametric control inside SOLIDWORKS with the help of VTube-LASER scanning.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_reverse-engineering_Y_pipe_parametric_overlay_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER.v2.9.10_ReverseEngineeringToAParametricPart.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 84: Measuring Convoluted Tube and Wire with VTube-LASER ====<br />
<br />
This video shows VTube-LASER's ability to measure extremely convoluted parts. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_convoluted_tube_and_wire_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/277725088 Vimeo]<br />
* View on [https://youtu.be/ZkZm3bFHzog YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_convoluted_tube_wire_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.9===<br />
<br />
<br />
====Video 83: How to Use VTube-STEP and VTube-LASER to Setup and Correct a UNISON Bender ====<br />
<br />
This video shows how to use VTube to setup and correct a Unison bender from model through finished part.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vvtl_2.9.9_setup and correct a unison bender video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/276530203 Vimeo]<br />
* View on [https://youtu.be/4cDtx3Zgzwk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.9_correcting_unison_benders.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.8===<br />
<br />
<br />
====Video 82: Using MTA x 3 To Measure Highly Deformed Exhaust Pipes ====<br />
<br />
This video shows using a three-measure MTA (Measured Tube Average) feature to reduce the deviations due to deformation by 50% in a highly deformed exhaust pipe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.8_mta3_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/271371983 Vimeo]<br />
* View on [https://youtu.be/CWAWzvPRISI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.8_mta3_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 81: SOCO Bender Correction ====<br />
<br />
This video was taken at the TFS open house in Elkhart, Indiana in May, 2018. It shows an actual bender correction and its result after one correction.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.8_sococorrection.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/269557993 Vimeo]<br />
* View on [https://youtu.be/c_txfQvZuX4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_2.9.8_SOCO_Corrections_Loop.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
<br />
<br />
====Video 80: TRAX Rail Arm Extender ====<br />
<br />
This video shows a quick intro to the TRAX Rail system that extend the reach of a measuring center either 1800mm or 3500mm depending on the model.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-TRAX_Video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/268826288 Vimeo]<br />
* View on [https://youtu.be/DVn_2V5PnXo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/AdvancedTubularTrax_VTube-LASER_1800_ROMER.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.7===<br />
<br />
====Video 79: EXPORT REPORTS to EXTERNAL NETWORK LOCATIONS ====<br />
<br />
This video demonstrates how to export a report to an external network location.<br><br><br />
This allows anyone with access to the network path to view VTube-LASER reports in a web browser.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-V2.9.7_ExportHTMLReportToPath.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.7_exportreports.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.4===<br />
<br />
====Video 78: VTube-LASER Corrects an SMT Bender ====<br />
<br />
This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.4_smtcorrection_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/256176430 Vimeo]<br />
* View on [https://youtu.be/YUwPGsUeiP4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl%20smtvideo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.3===<br />
<br />
====Video 77: Build Entire Assemblies to SOLIDWORKS ====<br />
<br />
This video demonstrates how this version of VTube-LASER can build entire assemblies to SOLIDWORKS for you in less than a minute with the press of a couple of buttons.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_swassembly_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/253353260 Vimeo]<br />
* View on [https://youtu.be/SdGz11P5uGQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_sw_assemblies.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 76: Use the Measured Tube Averaging (MTA) Feature for Super Accurate Measurements ====<br />
<br />
This video demonstrates how the MTA feature can measure both sides of the same tube to create a measured tube average for more reliable tube shape calculation.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' ROMER Absolute Arm 7325SI<br><br><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252767821 Vimeo]<br />
* View on [https://youtu.be/cJ8ts3QflKo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' FARO Quantum S ScanArm<br><br></td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252786153 Vimeo]<br />
* View on [https://youtu.be/w9IgI0G-gUo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Other Pages===<br />
<br />
* See [[Retired VTube-LASER Videos]]<br />
* Back to [[VTube-LASER]]</div>Mconehttp://www.advancedtubular.wiki/index.php/VTube-LASER_VideosVTube-LASER Videos2023-02-24T20:13:18Z<p>Mcone: /* Video 20230224: Proper End Straight Scanning Ensures Correct End Point */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=300><br />
<br />
See a complete list of VTube-LASER videos on this page.<br><br><br />
<br />
* Back to [https://www.advancedtubulartech.com/vtube-laser the Main VTube-LASER] web page<br><br><br />
* Back to [[VTube-LASER]] Knowledgebase Page<br><br><br />
* Note: VTube-STEP is included with every VTube-LASER installation. You can watch '''VTube-STEP videos''' in the [[VTube-STEP Videos]] page.<br><br><br />
* See [[Retired VTube-LASER Videos]]<br />
</td><br />
<td width=300><br />
[[image:vtube-laser_videos.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
__NOTOC__<br />
<br />
==Video Subpages Related to Specific Arms==<br />
Click on the images to enter the video subpages with videos for specific arms.<br><br><br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTube-LASER_Videos_HEXAGON_ROMER.png|200px|link=VTube-LASER Videos for HEXAGON ROMER]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:vtube-laser_video_FARO.png|200px|link=VTube-LASER Videos for FARO|]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos Kreon.png|200px|link=VTube-LASER Videos for Kreon]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos MicroScribe.png|200px|link=VTube-LASER Videos for MicroScribe]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
<br><br><br><br><br />
<br />
==Latest Videos==<br />
<br />
===Version 4===<br />
<br />
<br />
====Video 20230224: Proper End Straight Scanning Ensures Correct End Point Locations ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone, the lead developer for VTube-LASER shows how to get reliable end point locations from proper end straight scanning techniques.<br />
<td width=200><br />
[[image:vtl_v4_ProperEndStraightScanningForGoodEndPoints.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230224_TutorialForProperEndStraightScanning.mp4 MP4]<br />
* View video [https://vimeo.com/802070332 Vimeo]<br />
* View video [https://youtu.be/k-Qkm8OJEfk YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230206: How to learn, test, and use the DCP (Diameter Cut Plane) to measure tube straights that are near other objects ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to learn, test, and use the DCP feature to measure tubes that run near other objects.<br />
<td width=200><br />
[[image:vtl_v4_DCPTutorial.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230206_DiameterCutPlaneTutorial.mp4 MP4]<br />
* View video [https://vimeo.com/796424925 Vimeo]<br />
* View video [https://youtu.be/CLcExwN-pTA YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230112: How to Export to Microsoft Excel from VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the different ways to export from VTube-STEP and VTube-LASER to Microsoft Excel.<br />
<td width=200><br />
[[image:vtl_v4_MicrosoftExcelVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230112_ExportingToExcel_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/789311957 Vimeo]<br />
* View video [https://youtu.be/noSSut2RMYg YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230106: Easy Fine-tuning for Bender Corrections with Correction Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to quickly reduce bender adjustments using Correction Percentage.<br />
<td width=200><br />
[[image:vtl_v4_CorrectionPercentageVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230106_VTube-LASER_v4_CorrectionPercentage.mp4 MP4]<br />
* View video [https://vimeo.com/787736630 Vimeo]<br />
* View video [https://youtu.be/deLKsd3LDU4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20221006: GD&T Perpendicularity Tutorial for End Trim Profile Measure Process====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the End Trim Profile measure process to calculate GD&T perpendicularity.<br />
<td width=200><br />
[[image:vtl_v4_EndTrimProfileMeasureVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20221005_EndTrimProfile_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/757282746 Vimeo]<br />
* View video [https://youtu.be/kQKgeSerbz8 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220927: Measuring a Can-Am Maverick Radius Rod with VTube-LASER Space Objects====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Calvin Nichoson (VTube-LASER Technician) measuring a Can-Am Maverick radius rod with VTube-LASER version 4 Space Objects.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_Can-Am.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220926_VTL_Can-AmMaverickX3LowerRadiusRod_Measure.mp4 MP4]<br />
* View video [https://vimeo.com/754344224 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220912: Sneak Peek Preview - Space Objects Feature in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Space Object feature coming in version 4 of VTube-LASER.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_v2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220912_SneakPeekPreviewSpaceObjects.mp4 MP4]<br />
* View video [https://vimeo.com/749197784 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220908: Sneak Peek Preview - Shallow Bend Logic in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Shallow Bend logic coming in version 4 of VTube-LASER which increases bend point location placement by up to 10 times.<br />
<td width=200><br />
[[image:vtl_v4_ShallowBendVideo_v2c.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220906_VTube-LASER_v4_ShallowBendMeasureLogic.mp4 MP4]<br />
* View Video [https://vimeo.com/747812907 Vimeo]<br />
* View Video [https://youtu.be/ZosWxq4A4NU YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.2===<br />
<br />
====Video 20220823: Automatic Global Configuration Backup File Location====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube making automatic backups of the Global Configuration file.<br />
<br><br><br />
The backup files ensure that you never lose the configuration of the global configuration file. If the configuration is lost, then it can be easily recovered with these files.<br />
<td width=200><br />
[[image:vtl_videoimage_backupglobalconfig.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220823_VTube_Global_Config_Backup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220819: Overview of VTube-LASER to COMCO Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows an overview of communications to the COMCO benders using VTube-LASER<br />
<td width=200><br />
[[image:vtl_videoimage_comcooverview.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220819_COMCO_Bender_Corrections_In_VTube-LASER.mp4 MP4]<br />
* See PDF [https://www.advancedtubular.com/vtube-laser/20210817-How_To_Export_CSV_from_COMCO.pdf How to Export CSV from COMCO] <br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220629: How Set Up to Correct SMI Benders with VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows set up VTube-LASER to correct SMI benders.<br />
<td width=200><br />
[[image:vtl_v3.2_SMIBenderCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220629_VTube-LASER_SMI_Corrections.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220603: How To Measure Square and Rectangular Tubing with VTube-LASER and a FARO ScanArm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how use a FARO Quantum ScanArm to measure square or rectangular tubing.<br />
<td width=200><br />
[[image:vtl_v3.2_FaroSquareTubingVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220603_vtl3.2_SquareTube_FARO.mp4 MP4]<br />
* View [https://vimeo.com/716899246 Vimeo] <br />
* View [https://youtu.be/rhohh9X3bU0 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220513: How To Measure Square Tube with VTube-LASER Using a HEXAGON Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models, measure them, correct tube benders to adjust the shape, and then qualify square tube shapes using VTube-LASER Corner Profile measure process.<br />
<td width=200><br />
[[image:vtl_v3.2b755_SquareTubeVideo_Hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220513_VTube-LASER_MeasureSquare_HEXAGON_ScanArm.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br><br />
<br />
====Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.<br />
<td width=200><br />
[[image:vtl_v3.2b750_CNCBenderBenderlinkVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220421_VTube-LASER_to_CNC_Bender_Communications_Setup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220420: Measuring 180-degree Bends with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure 180-degree bends with the Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b750_Kreon180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220420_vtl_Kreon_180-Degree_Bends_rev2.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220413: Square Tube Measuring with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows square tube measuring using a Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b744_KreonSquareTube.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220413_vtl_v3.2_kreon_square_tube.mp4 MP4]<br />
* View [https://vimeo.com/699270748 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220331: Improved Best Fit For Shallow Bends====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how this version of VTube-LASER has an improved Best Fit algorithm designed to handle tubes with shallow bends.<br />
<td width=200><br />
[[image:vtl_v3.2b714_BestFitShallowBend.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220331_v3.2_b714_BestFitShallowBendLogic.mp4 MP4]<br />
* View [https://vimeo.com/694643426 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.1===<br />
====Video 20220221-C: Aligning the Kreon Scanner in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to align the Kreon scanner to the Kreon arm in VTube-LASER before you start using the Kreon arm the first time.<br />
<br />
<td width=200><br />
[[image:kreon_video3.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_scanner_positioning_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220221-B: Controlling the Kreon Video Settings Properly ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter and control the values in the Kreon Video Settings window.<br />
<br />
<td width=200><br />
[[image:kreon_video4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_video_setup_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220221: Verifying VTube-LASER and Kreon with a Test Cylinder====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and use a test cylinder to verify your measuring system at the beginning of each day.<br />
<br />
<td width=200><br />
[[image:kreon_video2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_test_cylinder_setup.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
====Video 20220216: VTube-LASER Using a Kreon Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the connection to a Kreon ACES scan arm with a Solano blue line scanner.<br />
<br />
<td width=200><br />
[[image:kreon_video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v3.1_kreon_intro.mp4 MP4]<br />
* View [https://vimeo.com/678223398 Vimeo]<br />
* View [https://youtu.be/6o7W38-q1lU YouTube]<br />
<br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to calculate tube elongation percentage with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20220113_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_training%20video%2015%20-%20How%20to%20Calculate%20the%20Tube%20Elongation%20Percentage.mp4 MP4]<br />
* View [https://vimeo.com/665826780 Vimeo]<br />
* View [https://youtu.be/a0bc6IpbWb0 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20211207: VTube-LASER Correction for Han Jie Benders====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638)<br />
<br />
<td width=200><br />
[[image:20211207_VTube-LASER_to_HanJie_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER_HanJie_Promotional.mp4 MP4]<br />
* View [https://vimeo.com/654364120 Vimeo]<br />
* View [https://youtu.be/ym8LbFUpyow YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===Version 3.0===<br />
<br />
====Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)<br />
<br />
<td width=200><br />
[[image:20210702_TangentPointEntryGrid.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_b555_tangent_point_entry_grid.mp4 MP4]<br />
* View [https://vimeo.com/571874446 Vimeo]<br />
* View [https://youtu.be/C9yLbhoWlSE YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021)<br />
<br />
<td width=200><br />
[[image:20210622_End_Scan_Flier_Filter_Promo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_endscanflierfilter_promo.mp4 MP4]<br />
* View [https://vimeo.com/567104555 Vimeo]<br />
* View [https://youtu.be/RfWxFa6fEFk YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210505: How To Determine Positive and Negative Rotation Directions====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube.<br />
<br />
<td width=200><br />
[[image:20210505_Positive_Rotation_Direction.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_positive_rotation_direction.mp4 MP4]<br />
* View [https://vimeo.com/545519786 Vimeo]<br />
* View [https://youtu.be/CL7L-rZbVDQ YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210503: Automatic Reverse Calc====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513.<br />
<br />
<td width=200><br />
[[image:20210503_AutomaticReverseCalcVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vt_v3_b513_automatic_reverse_calc.mp4 MP4]<br />
* View [https://vimeo.com/545518519 Vimeo]<br />
* View [https://youtu.be/-rh5eNA8tIA YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210421: Why and How to Use MTA (Measured Tube Averaging)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows the why and how of MTA.<br />
<br />
<td width=200><br />
[[image:20210421_MTAVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_mta_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/541156704 Vimeo]<br />
* View [https://youtu.be/gGSAR-a6m3Q YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100413: VTube v3 NPS Values Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how to use the new NPS values in VTube.<br />
<br />
<td width=200><br />
[[image:20210413_NPSVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_nps_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/536497747 Vimeo]<br />
* View [https://youtu.be/RcKawANCpWY YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100406: VTube-LASER Reverse Engineering Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210406_ReverseEngineeringVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_reverse_engineering_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/533692712 Vimeo]<br />
* View [https://youtu.be/7N_-0d_Mjp4 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210330: VTube-LASER to Transfluid Bender Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to communicate with Transfluid tProject bender software.<br />
<br />
<td width=200><br />
[[image:20210330_TransfluidTProjectCommunications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_transfluid_tproject_communications.mp4 MP4]<br />
* View [https://vimeo.com/531073455 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210313: How to Enter Bender Data of Different Types in the Same Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data.<br />
<br />
<td width=200><br />
[[image:20210313_ImportMixedBenderData.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_entering_mixed_bender_data_types.mp4 MP4]<br />
* View [https://vimeo.com/523279713 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210310: How to Import New Report Templates====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import new report templates into VTube-STEP and VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210310_ImportReportTemplates.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_importingreporttemplates.mp4 MP4]<br />
* View [https://vimeo.com/522027683 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210212: Switch the FARO Scanner ON and OFF Manually====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Use this process to quickly switch the FARO scanner on or off manually.<br />
<br />
<td width=200><br />
[[image:20210212_FARO_Scanner_ONOFF.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_20210212_FARO_Scanner_Laser_On_Off.mp4 MP4]<br />
* View [https://vimeo.com/511726559 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes.<br />
<br />
<td width=200><br />
[[image:20201221_UTESelectCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_UTE_Select_Corrections_Hexagon.mp4 MP4]<br />
* View [https://vimeo.com/493550553 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201117: Calculate Centerline Radii Using Measure Bend Profile (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Quickly and accurately measure the centerline radius using the Measure Bend Profile process.<br />
<br />
<td width=200><br />
[[image:20201117_measurebendprofile_bendradii.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_bend_profile_scan_for_radius_faro.mp4 MP4]<br />
* View [https://vimeo.com/480569055 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights.<br />
<br />
<td width=200><br />
[[image:20201111B_autocopydefaulttolerance.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_automatic_copy_of_default_tolerance.mp4 MP4]<br />
* View [https://vimeo.com/478271550 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges.<br />
<br />
<td width=200><br />
[[image:20201111_precisionweightcontrolalignment.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_precision_weight_control_alignment.mp4 MP4]<br />
* View [https://vimeo.com/478127038 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm.<br />
<br />
<td width=200><br />
[[image:20200930_measuring_od_end_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_qualifying_endscan_profiles_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/463607514 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports_hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/461988796 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200923: How to Measure and Qualify Ports on a Tube Using Assembly (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_faro.mp4 MP4]<br />
* View [https://vimeo.com/461239022 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200804: Measuring a Brake Line with a FARO EDGE Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER measuring a brake line with a legacy FARO Edge Scan Arm.<br />
<br />
<td width=200><br />
[[image:2020804_Brake_Line_FAROEdge.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_faro_edge_brake_line.mp4 MP4]<br />
* View [https://vimeo.com/444720352 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner.<br />
<br />
<td width=200><br />
[[image:20200722_RA7520_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/440788274 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_ra-7520_SI_ScanningTube.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200709: Real-time Overall Scan Scores Build Confidence (HEXAGON RA8)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how VTube-LASER scan scoring system helps users know they are measuring well.<br />
<br />
<td width=200><br />
[[image:20200709_scanscore_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_realtime_scanscore.mp4 MP4]<br />
* View [https://vimeo.com/437000592 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200609: How to Use Multiple Versions of the Same Part in One Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to create multiple versions of the same part in one project. Each version can then be used to measure the part at various stages of the fabrication process.<br />
<br />
<td width=200><br />
[[image:20200609_multiple_versions_parts_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_multiple_versions_of_same_part.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
====Video 20200515: How Import 180-degree Bend Models====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models with 180-degree bends.<br />
<br />
<td width=200><br />
[[image:20200515_import180_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_import_180-degree_bend_models.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 20200514: How to Change Languages in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to change languages in the VTube-LASER and VTube-STEP user interface.<br />
<br />
<td width=200><br />
[[image:20200514_changelanguges_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_change_languages.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200406: Measure Corner Profile with VTube-LASER and FARO Quantum====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure a corner profile shape with the Corner Profile measure process using a FARO Quantum arm.<br />
<br />
<td width=200><br />
[[image:20200406_cornerprofile_faro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/404834117 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/404834117/b97d3500e3 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200406_vtl3_cornerprofile_faro_quantum.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar.<br />
<br />
<td width=200><br />
[[image:20200331_training_hexagon_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402756704 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402756704/45b8f394d8 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl3_verify_hexagon_with_cyl_length_bar.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200327: VTube UNIVERSITY Training Video: Introduction to Import and Measuring Tube Shape Demo Tube 5 with a FARO Arm====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to accompany training document 20200327..002" [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:20200327_trainingdoc002_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402035686 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402035686/bdbb6da5fe Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_Intro_To_Import_And_Measure_VTube-LASER_with_FARO_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200323: VTube UNIVERSITY Training Video: FARO Account Manager Demo Training====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to demonstrate VTube-LASER using a FARO ScanArm.<br><br><br />
This video is a supplement to the demo training document available on [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:vtl_v3.0_training_faro_demonstration.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399899513 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/399899513/aa54eece37 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_demonstrating_vtube-laser_with_faro_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200320: VTube UNIVERSITY Training Video: End Scans====<br />
(HEXAGON RA8-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_training_endscan_technique.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399358340 Vimeo]<br />
* View [https://youtu.be/qb9G15eQGpk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200320_VTubeUniversity_vtl_v3_endscan_technique_rev2.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200306: VTube-LASER Correction of an OMCG Wire Bender====<br />
(HEXAGON RA7-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a corrections loop between VTube-LASER and an OMCG wire bender.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_correct_OMCG.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://youtu.be/xFtyRToRwFY YouTube]<br />
* View [https://vimeo.com/396590418 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200306_VTube-LASER_to_OMCG_Corrections_at_Ohio_Precision_Products.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
You can manually setup the Ethernet port following the steps in this short video.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_setupethnernetHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20200225_vtl_v3_Windows10_Ethernet_Setup_For_HEXAGON_RDS.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Switching from probe to laser is easy with the three-way toggle button.<br />
<br />
(Using a HEXAGON RA8 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_switchingprobesHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389798661 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200206_vtl_v3.0_how%20to%20switch%20from%20ball%20to%20laser%20in%20HEXAGON%20RS8%20Arms.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.21===<br />
<br />
====Video 20200204: How to Measure a Bend Radius with Bend Profile Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Bend Profile measure process to measure a bend radius.<br />
<br />
(Using a FARO Quantum ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.21_bendprofilescan_faroquantum.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389291065 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_bendprofilescan_faroquantum.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE. <br />
<br />
(Using a HEXAGON 8325 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles_002.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/384896663 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.21_cornerprofile_demo_2.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 110: Corner Profile Measure Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER can easily measure corner profiles.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/360026684 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 107: Corrections Loop with SOCO Beckhoff Controls====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_soco_beckhoff_communications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/356003359 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_SOCO_SV-M_Protocol.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.20===<br />
<br />
====Video 105: Measuring a Part with 180-Degree Bends====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows VTube-LASER scanning through a part with two 180-degree bends.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.20.video_hvac_dual180.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/345144160 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.20_hvac_dual_split_bend_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.19===<br />
<br />
====Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_different_tube_types_scanned.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332490313 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_quickscan_multiple_part_types.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_timer_accept_button.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332124282 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_accepttimer.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 102: VTube-LASER is Now Compatible with Baces USB Arms====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER working with a Baces USB arm. <br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_baces_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/329690049 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_BacesArmDemo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.18===<br />
<br />
====Video 101: How Automatic Laser Separation for UniScan Makes Scanning Tubes Easier (HEXAGON Arm)====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the Automatic Laser Separation feature introduced in version 2.9.18 on March 15, 2018.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_automatic_laser_separation_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/324467076 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.18_automatic_laser_separation_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_calculate_true_radius_180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.18_measure_180_degree_bend_radius.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_reverse_RZR_side_by_side.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320630910 Vimeo]<br />
* View [https://youtu.be/Qpn8Iyl_RwU YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_reverse_rzr_side_by_side.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 98: About the Small Diameter Warning ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how Small Diameter Warning works along with its setup.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_small_diameter_warning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320355578 Vimeo]<br />
* View [https://youtu.be/uT_PN-lNsz8 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-step/vtube_v2.9.18_minimum_diameter_warning.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 96: VTube-STEP and VTube-LASER New Radius Features ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See the new radius features in this video. In Part Setup:<br />
* Renamed "Radius 1" (renamed from Default Radius)<br />
* New "Radius 2" field<br />
* New "Radius 3" field<br />
<br><br />
In Parametric Tube grid windows:<br><br />
* See how to quickly set the radii for all bends using the synchronize radius feature.<br />
<br />
</td><br />
<td width=200><br />
[[image:vtube_v2.9.18.video_newradius_features.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/317137310 Vimeo]<br />
* View [https://youtu.be/DN_bhnMWCPI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.18_new_syncradlevels.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.17===<br />
<br />
====Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer ====<br />
<br />
Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.18.video_RbSABendPro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/315983373 Vimeo]<br />
* View [https://youtu.be/RLCXQt34Alw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_bendpro_communications.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_hexagon_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309191006 Vimeo]<br />
* View [https://youtu.be/kRwrjV9AqZA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_hexagon_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 93: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the FARO QUANTUM SCANARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_faro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309031852 Vimeo]<br />
* View [https://youtu.be/mt3Wn30EQIs YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_faro_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 92: Measuring part "VTube-LASER Demo 5" with MicroScribe in Version 2.9.17 ====<br />
<br />
This video shows how to measure demo part 5 with version 2.9.17 of VTube-LASER. (Released in December 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_microscribe_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/308642989 Vimeo]<br />
* View [https://youtu.be/_aZg3KpVDis YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.17_microscribe_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 91: How To Reverse-Engineer to STEP file with a FARO ScanArm Using VTube-LASER ====<br />
<br />
This video shows how to reverse-engineer a tube to STEP file. Michael Cone is using VTube-LASER 2.9.17 and a FARO Quantum S ScanArm.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_reverse_faro.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/301420583 Vimeo]<br />
* View [https://youtu.be/N9CcloLF-jQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_reverse-engineer-to-STEP.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.16===<br />
<br />
====Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER ====<br />
<br />
This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.16._attach_and_use_RA8_scanner.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/298226309 Vimeo]<br />
* View [https://youtu.be/GQnAAGLJ-Sc YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.16_ROMER8_HowToAttachAndUseScanner.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.14===<br />
<br />
<br />
====Video 89: MEASURING SMALL TUBES with MICROSCRIBE ====<br />
<br />
<table width=600><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to measure small tubes with the MicroScribe i arm using VTube-LASER.</td><br />
<td width=200><br />
[[image:VTL MicroScribe Video 4.png|300px]]<br><br />
</td><br />
<td width=200><br />
* View on [https://vimeo.com/288409692 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.14_microscribe_dual_split_bend_0.1875.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br />
<br />
===Version 2.9.12===<br />
<br />
====Video 88: VTube-LASER and VTube-STEP Unlimited NOTE LIST Feature ====<br />
<br />
This video shows the new unlimited NOTE LIST feature that allows you to add any number of notes to a VTube project.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.12_notelist_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/285420883 Vimeo]<br />
* View [https://youtu.be/N5kGhWQjFHA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.12_noteslist_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.11===<br />
<br />
====Video 87: VTube-LASER's IMPROVED SQUARE TUBE SCANNING (FARO) ====<br />
<br />
This video shows the improved square-tube scanning feature in version 2.9.11 using a FARO ScanArm.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.11_squaretubescanningfaro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/279182056 Vimeo]<br />
* View [https://youtu.be/0viGl_CnzlM YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.11_scanning_square_tube_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.10===<br />
<br />
====Video 86: VTube-LASER's LASER SCAN FILTER SOUND ====<br />
<br />
This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.10._laserscanfilter_sound.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/278343562 Vimeo]<br />
* View [https://youtu.be/lAmLVzMHatw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_romer_laserscanfilter_sound.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 85: Using VTube-LASER to Supply SOLIDWORKS with Data for Parametric Overlay ====<br />
<br />
This video shows a workflow that allows you to reverse-engineer a Y-pipe sample into SOLIDWORKS. The workflow uses a parametrically-controlled template file in SOLIDWORKS that was created to overlay the scanned-in data for an approximate match. This is an advanced topic for SOLIDWORKS users that concentrates mainly on how it is possible to handle parametric control inside SOLIDWORKS with the help of VTube-LASER scanning.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_reverse-engineering_Y_pipe_parametric_overlay_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER.v2.9.10_ReverseEngineeringToAParametricPart.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 84: Measuring Convoluted Tube and Wire with VTube-LASER ====<br />
<br />
This video shows VTube-LASER's ability to measure extremely convoluted parts. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_convoluted_tube_and_wire_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/277725088 Vimeo]<br />
* View on [https://youtu.be/ZkZm3bFHzog YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_convoluted_tube_wire_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.9===<br />
<br />
<br />
====Video 83: How to Use VTube-STEP and VTube-LASER to Setup and Correct a UNISON Bender ====<br />
<br />
This video shows how to use VTube to setup and correct a Unison bender from model through finished part.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vvtl_2.9.9_setup and correct a unison bender video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/276530203 Vimeo]<br />
* View on [https://youtu.be/4cDtx3Zgzwk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.9_correcting_unison_benders.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.8===<br />
<br />
<br />
====Video 82: Using MTA x 3 To Measure Highly Deformed Exhaust Pipes ====<br />
<br />
This video shows using a three-measure MTA (Measured Tube Average) feature to reduce the deviations due to deformation by 50% in a highly deformed exhaust pipe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.8_mta3_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/271371983 Vimeo]<br />
* View on [https://youtu.be/CWAWzvPRISI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.8_mta3_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 81: SOCO Bender Correction ====<br />
<br />
This video was taken at the TFS open house in Elkhart, Indiana in May, 2018. It shows an actual bender correction and its result after one correction.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.8_sococorrection.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/269557993 Vimeo]<br />
* View on [https://youtu.be/c_txfQvZuX4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_2.9.8_SOCO_Corrections_Loop.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
<br />
<br />
====Video 80: TRAX Rail Arm Extender ====<br />
<br />
This video shows a quick intro to the TRAX Rail system that extend the reach of a measuring center either 1800mm or 3500mm depending on the model.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-TRAX_Video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/268826288 Vimeo]<br />
* View on [https://youtu.be/DVn_2V5PnXo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/AdvancedTubularTrax_VTube-LASER_1800_ROMER.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.7===<br />
<br />
====Video 79: EXPORT REPORTS to EXTERNAL NETWORK LOCATIONS ====<br />
<br />
This video demonstrates how to export a report to an external network location.<br><br><br />
This allows anyone with access to the network path to view VTube-LASER reports in a web browser.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-V2.9.7_ExportHTMLReportToPath.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.7_exportreports.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.4===<br />
<br />
====Video 78: VTube-LASER Corrects an SMT Bender ====<br />
<br />
This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.4_smtcorrection_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/256176430 Vimeo]<br />
* View on [https://youtu.be/YUwPGsUeiP4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl%20smtvideo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.3===<br />
<br />
====Video 77: Build Entire Assemblies to SOLIDWORKS ====<br />
<br />
This video demonstrates how this version of VTube-LASER can build entire assemblies to SOLIDWORKS for you in less than a minute with the press of a couple of buttons.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_swassembly_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/253353260 Vimeo]<br />
* View on [https://youtu.be/SdGz11P5uGQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_sw_assemblies.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 76: Use the Measured Tube Averaging (MTA) Feature for Super Accurate Measurements ====<br />
<br />
This video demonstrates how the MTA feature can measure both sides of the same tube to create a measured tube average for more reliable tube shape calculation.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' ROMER Absolute Arm 7325SI<br><br><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252767821 Vimeo]<br />
* View on [https://youtu.be/cJ8ts3QflKo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' FARO Quantum S ScanArm<br><br></td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252786153 Vimeo]<br />
* View on [https://youtu.be/w9IgI0G-gUo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Other Pages===<br />
<br />
* See [[Retired VTube-LASER Videos]]<br />
* Back to [[VTube-LASER]]</div>Mconehttp://www.advancedtubular.wiki/index.php/File:Vtl_v4_ProperEndStraightScanningForGoodEndPoints.pngFile:Vtl v4 ProperEndStraightScanningForGoodEndPoints.png2023-02-24T20:11:15Z<p>Mcone: </p>
<hr />
<div></div>Mconehttp://www.advancedtubular.wiki/index.php/VTube-LASER_VideosVTube-LASER Videos2023-02-24T20:10:57Z<p>Mcone: /* Video 20230224: Important Tips for End-Straight/End Scanning */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=300><br />
<br />
See a complete list of VTube-LASER videos on this page.<br><br><br />
<br />
* Back to [https://www.advancedtubulartech.com/vtube-laser the Main VTube-LASER] web page<br><br><br />
* Back to [[VTube-LASER]] Knowledgebase Page<br><br><br />
* Note: VTube-STEP is included with every VTube-LASER installation. You can watch '''VTube-STEP videos''' in the [[VTube-STEP Videos]] page.<br><br><br />
* See [[Retired VTube-LASER Videos]]<br />
</td><br />
<td width=300><br />
[[image:vtube-laser_videos.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
__NOTOC__<br />
<br />
==Video Subpages Related to Specific Arms==<br />
Click on the images to enter the video subpages with videos for specific arms.<br><br><br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTube-LASER_Videos_HEXAGON_ROMER.png|200px|link=VTube-LASER Videos for HEXAGON ROMER]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:vtube-laser_video_FARO.png|200px|link=VTube-LASER Videos for FARO|]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos Kreon.png|200px|link=VTube-LASER Videos for Kreon]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos MicroScribe.png|200px|link=VTube-LASER Videos for MicroScribe]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
<br><br><br><br><br />
<br />
==Latest Videos==<br />
<br />
===Version 4===<br />
<br />
<br />
====Video 20230224: Proper End Straight Scanning Ensures Correct End Point ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone, the lead developer for VTube-LASER shows how to get reliable end point locations from proper end straight scanning techniques.<br />
<td width=200><br />
[[image:vtl_v4_ProperEndStraightScanningForGoodEndPoints.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230224_TutorialForProperEndStraightScanning.mp4 MP4]<br />
* View video [https://vimeo.com/802070332 Vimeo]<br />
* View video [https://youtu.be/k-Qkm8OJEfk YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230206: How to learn, test, and use the DCP (Diameter Cut Plane) to measure tube straights that are near other objects ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to learn, test, and use the DCP feature to measure tubes that run near other objects.<br />
<td width=200><br />
[[image:vtl_v4_DCPTutorial.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230206_DiameterCutPlaneTutorial.mp4 MP4]<br />
* View video [https://vimeo.com/796424925 Vimeo]<br />
* View video [https://youtu.be/CLcExwN-pTA YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230112: How to Export to Microsoft Excel from VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the different ways to export from VTube-STEP and VTube-LASER to Microsoft Excel.<br />
<td width=200><br />
[[image:vtl_v4_MicrosoftExcelVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230112_ExportingToExcel_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/789311957 Vimeo]<br />
* View video [https://youtu.be/noSSut2RMYg YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230106: Easy Fine-tuning for Bender Corrections with Correction Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to quickly reduce bender adjustments using Correction Percentage.<br />
<td width=200><br />
[[image:vtl_v4_CorrectionPercentageVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230106_VTube-LASER_v4_CorrectionPercentage.mp4 MP4]<br />
* View video [https://vimeo.com/787736630 Vimeo]<br />
* View video [https://youtu.be/deLKsd3LDU4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20221006: GD&T Perpendicularity Tutorial for End Trim Profile Measure Process====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the End Trim Profile measure process to calculate GD&T perpendicularity.<br />
<td width=200><br />
[[image:vtl_v4_EndTrimProfileMeasureVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20221005_EndTrimProfile_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/757282746 Vimeo]<br />
* View video [https://youtu.be/kQKgeSerbz8 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220927: Measuring a Can-Am Maverick Radius Rod with VTube-LASER Space Objects====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Calvin Nichoson (VTube-LASER Technician) measuring a Can-Am Maverick radius rod with VTube-LASER version 4 Space Objects.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_Can-Am.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220926_VTL_Can-AmMaverickX3LowerRadiusRod_Measure.mp4 MP4]<br />
* View video [https://vimeo.com/754344224 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220912: Sneak Peek Preview - Space Objects Feature in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Space Object feature coming in version 4 of VTube-LASER.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_v2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220912_SneakPeekPreviewSpaceObjects.mp4 MP4]<br />
* View video [https://vimeo.com/749197784 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220908: Sneak Peek Preview - Shallow Bend Logic in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Shallow Bend logic coming in version 4 of VTube-LASER which increases bend point location placement by up to 10 times.<br />
<td width=200><br />
[[image:vtl_v4_ShallowBendVideo_v2c.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220906_VTube-LASER_v4_ShallowBendMeasureLogic.mp4 MP4]<br />
* View Video [https://vimeo.com/747812907 Vimeo]<br />
* View Video [https://youtu.be/ZosWxq4A4NU YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.2===<br />
<br />
====Video 20220823: Automatic Global Configuration Backup File Location====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube making automatic backups of the Global Configuration file.<br />
<br><br><br />
The backup files ensure that you never lose the configuration of the global configuration file. If the configuration is lost, then it can be easily recovered with these files.<br />
<td width=200><br />
[[image:vtl_videoimage_backupglobalconfig.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220823_VTube_Global_Config_Backup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220819: Overview of VTube-LASER to COMCO Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows an overview of communications to the COMCO benders using VTube-LASER<br />
<td width=200><br />
[[image:vtl_videoimage_comcooverview.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220819_COMCO_Bender_Corrections_In_VTube-LASER.mp4 MP4]<br />
* See PDF [https://www.advancedtubular.com/vtube-laser/20210817-How_To_Export_CSV_from_COMCO.pdf How to Export CSV from COMCO] <br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220629: How Set Up to Correct SMI Benders with VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows set up VTube-LASER to correct SMI benders.<br />
<td width=200><br />
[[image:vtl_v3.2_SMIBenderCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220629_VTube-LASER_SMI_Corrections.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220603: How To Measure Square and Rectangular Tubing with VTube-LASER and a FARO ScanArm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how use a FARO Quantum ScanArm to measure square or rectangular tubing.<br />
<td width=200><br />
[[image:vtl_v3.2_FaroSquareTubingVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220603_vtl3.2_SquareTube_FARO.mp4 MP4]<br />
* View [https://vimeo.com/716899246 Vimeo] <br />
* View [https://youtu.be/rhohh9X3bU0 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220513: How To Measure Square Tube with VTube-LASER Using a HEXAGON Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models, measure them, correct tube benders to adjust the shape, and then qualify square tube shapes using VTube-LASER Corner Profile measure process.<br />
<td width=200><br />
[[image:vtl_v3.2b755_SquareTubeVideo_Hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220513_VTube-LASER_MeasureSquare_HEXAGON_ScanArm.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br><br />
<br />
====Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.<br />
<td width=200><br />
[[image:vtl_v3.2b750_CNCBenderBenderlinkVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220421_VTube-LASER_to_CNC_Bender_Communications_Setup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220420: Measuring 180-degree Bends with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure 180-degree bends with the Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b750_Kreon180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220420_vtl_Kreon_180-Degree_Bends_rev2.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220413: Square Tube Measuring with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows square tube measuring using a Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b744_KreonSquareTube.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220413_vtl_v3.2_kreon_square_tube.mp4 MP4]<br />
* View [https://vimeo.com/699270748 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220331: Improved Best Fit For Shallow Bends====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how this version of VTube-LASER has an improved Best Fit algorithm designed to handle tubes with shallow bends.<br />
<td width=200><br />
[[image:vtl_v3.2b714_BestFitShallowBend.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220331_v3.2_b714_BestFitShallowBendLogic.mp4 MP4]<br />
* View [https://vimeo.com/694643426 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.1===<br />
====Video 20220221-C: Aligning the Kreon Scanner in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to align the Kreon scanner to the Kreon arm in VTube-LASER before you start using the Kreon arm the first time.<br />
<br />
<td width=200><br />
[[image:kreon_video3.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_scanner_positioning_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220221-B: Controlling the Kreon Video Settings Properly ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter and control the values in the Kreon Video Settings window.<br />
<br />
<td width=200><br />
[[image:kreon_video4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_video_setup_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220221: Verifying VTube-LASER and Kreon with a Test Cylinder====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and use a test cylinder to verify your measuring system at the beginning of each day.<br />
<br />
<td width=200><br />
[[image:kreon_video2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_test_cylinder_setup.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
====Video 20220216: VTube-LASER Using a Kreon Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the connection to a Kreon ACES scan arm with a Solano blue line scanner.<br />
<br />
<td width=200><br />
[[image:kreon_video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v3.1_kreon_intro.mp4 MP4]<br />
* View [https://vimeo.com/678223398 Vimeo]<br />
* View [https://youtu.be/6o7W38-q1lU YouTube]<br />
<br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to calculate tube elongation percentage with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20220113_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_training%20video%2015%20-%20How%20to%20Calculate%20the%20Tube%20Elongation%20Percentage.mp4 MP4]<br />
* View [https://vimeo.com/665826780 Vimeo]<br />
* View [https://youtu.be/a0bc6IpbWb0 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20211207: VTube-LASER Correction for Han Jie Benders====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638)<br />
<br />
<td width=200><br />
[[image:20211207_VTube-LASER_to_HanJie_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER_HanJie_Promotional.mp4 MP4]<br />
* View [https://vimeo.com/654364120 Vimeo]<br />
* View [https://youtu.be/ym8LbFUpyow YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===Version 3.0===<br />
<br />
====Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)<br />
<br />
<td width=200><br />
[[image:20210702_TangentPointEntryGrid.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_b555_tangent_point_entry_grid.mp4 MP4]<br />
* View [https://vimeo.com/571874446 Vimeo]<br />
* View [https://youtu.be/C9yLbhoWlSE YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021)<br />
<br />
<td width=200><br />
[[image:20210622_End_Scan_Flier_Filter_Promo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_endscanflierfilter_promo.mp4 MP4]<br />
* View [https://vimeo.com/567104555 Vimeo]<br />
* View [https://youtu.be/RfWxFa6fEFk YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210505: How To Determine Positive and Negative Rotation Directions====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube.<br />
<br />
<td width=200><br />
[[image:20210505_Positive_Rotation_Direction.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_positive_rotation_direction.mp4 MP4]<br />
* View [https://vimeo.com/545519786 Vimeo]<br />
* View [https://youtu.be/CL7L-rZbVDQ YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210503: Automatic Reverse Calc====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513.<br />
<br />
<td width=200><br />
[[image:20210503_AutomaticReverseCalcVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vt_v3_b513_automatic_reverse_calc.mp4 MP4]<br />
* View [https://vimeo.com/545518519 Vimeo]<br />
* View [https://youtu.be/-rh5eNA8tIA YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210421: Why and How to Use MTA (Measured Tube Averaging)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows the why and how of MTA.<br />
<br />
<td width=200><br />
[[image:20210421_MTAVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_mta_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/541156704 Vimeo]<br />
* View [https://youtu.be/gGSAR-a6m3Q YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100413: VTube v3 NPS Values Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how to use the new NPS values in VTube.<br />
<br />
<td width=200><br />
[[image:20210413_NPSVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_nps_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/536497747 Vimeo]<br />
* View [https://youtu.be/RcKawANCpWY YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100406: VTube-LASER Reverse Engineering Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210406_ReverseEngineeringVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_reverse_engineering_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/533692712 Vimeo]<br />
* View [https://youtu.be/7N_-0d_Mjp4 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210330: VTube-LASER to Transfluid Bender Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to communicate with Transfluid tProject bender software.<br />
<br />
<td width=200><br />
[[image:20210330_TransfluidTProjectCommunications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_transfluid_tproject_communications.mp4 MP4]<br />
* View [https://vimeo.com/531073455 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210313: How to Enter Bender Data of Different Types in the Same Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data.<br />
<br />
<td width=200><br />
[[image:20210313_ImportMixedBenderData.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_entering_mixed_bender_data_types.mp4 MP4]<br />
* View [https://vimeo.com/523279713 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210310: How to Import New Report Templates====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import new report templates into VTube-STEP and VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210310_ImportReportTemplates.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_importingreporttemplates.mp4 MP4]<br />
* View [https://vimeo.com/522027683 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210212: Switch the FARO Scanner ON and OFF Manually====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Use this process to quickly switch the FARO scanner on or off manually.<br />
<br />
<td width=200><br />
[[image:20210212_FARO_Scanner_ONOFF.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_20210212_FARO_Scanner_Laser_On_Off.mp4 MP4]<br />
* View [https://vimeo.com/511726559 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes.<br />
<br />
<td width=200><br />
[[image:20201221_UTESelectCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_UTE_Select_Corrections_Hexagon.mp4 MP4]<br />
* View [https://vimeo.com/493550553 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201117: Calculate Centerline Radii Using Measure Bend Profile (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Quickly and accurately measure the centerline radius using the Measure Bend Profile process.<br />
<br />
<td width=200><br />
[[image:20201117_measurebendprofile_bendradii.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_bend_profile_scan_for_radius_faro.mp4 MP4]<br />
* View [https://vimeo.com/480569055 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights.<br />
<br />
<td width=200><br />
[[image:20201111B_autocopydefaulttolerance.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_automatic_copy_of_default_tolerance.mp4 MP4]<br />
* View [https://vimeo.com/478271550 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges.<br />
<br />
<td width=200><br />
[[image:20201111_precisionweightcontrolalignment.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_precision_weight_control_alignment.mp4 MP4]<br />
* View [https://vimeo.com/478127038 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm.<br />
<br />
<td width=200><br />
[[image:20200930_measuring_od_end_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_qualifying_endscan_profiles_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/463607514 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports_hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/461988796 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200923: How to Measure and Qualify Ports on a Tube Using Assembly (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_faro.mp4 MP4]<br />
* View [https://vimeo.com/461239022 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200804: Measuring a Brake Line with a FARO EDGE Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER measuring a brake line with a legacy FARO Edge Scan Arm.<br />
<br />
<td width=200><br />
[[image:2020804_Brake_Line_FAROEdge.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_faro_edge_brake_line.mp4 MP4]<br />
* View [https://vimeo.com/444720352 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner.<br />
<br />
<td width=200><br />
[[image:20200722_RA7520_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/440788274 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_ra-7520_SI_ScanningTube.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200709: Real-time Overall Scan Scores Build Confidence (HEXAGON RA8)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how VTube-LASER scan scoring system helps users know they are measuring well.<br />
<br />
<td width=200><br />
[[image:20200709_scanscore_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_realtime_scanscore.mp4 MP4]<br />
* View [https://vimeo.com/437000592 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200609: How to Use Multiple Versions of the Same Part in One Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to create multiple versions of the same part in one project. Each version can then be used to measure the part at various stages of the fabrication process.<br />
<br />
<td width=200><br />
[[image:20200609_multiple_versions_parts_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_multiple_versions_of_same_part.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
====Video 20200515: How Import 180-degree Bend Models====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models with 180-degree bends.<br />
<br />
<td width=200><br />
[[image:20200515_import180_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_import_180-degree_bend_models.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 20200514: How to Change Languages in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to change languages in the VTube-LASER and VTube-STEP user interface.<br />
<br />
<td width=200><br />
[[image:20200514_changelanguges_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_change_languages.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200406: Measure Corner Profile with VTube-LASER and FARO Quantum====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure a corner profile shape with the Corner Profile measure process using a FARO Quantum arm.<br />
<br />
<td width=200><br />
[[image:20200406_cornerprofile_faro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/404834117 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/404834117/b97d3500e3 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200406_vtl3_cornerprofile_faro_quantum.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar.<br />
<br />
<td width=200><br />
[[image:20200331_training_hexagon_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402756704 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402756704/45b8f394d8 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl3_verify_hexagon_with_cyl_length_bar.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200327: VTube UNIVERSITY Training Video: Introduction to Import and Measuring Tube Shape Demo Tube 5 with a FARO Arm====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to accompany training document 20200327..002" [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:20200327_trainingdoc002_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402035686 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402035686/bdbb6da5fe Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_Intro_To_Import_And_Measure_VTube-LASER_with_FARO_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200323: VTube UNIVERSITY Training Video: FARO Account Manager Demo Training====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to demonstrate VTube-LASER using a FARO ScanArm.<br><br><br />
This video is a supplement to the demo training document available on [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:vtl_v3.0_training_faro_demonstration.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399899513 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/399899513/aa54eece37 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_demonstrating_vtube-laser_with_faro_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200320: VTube UNIVERSITY Training Video: End Scans====<br />
(HEXAGON RA8-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_training_endscan_technique.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399358340 Vimeo]<br />
* View [https://youtu.be/qb9G15eQGpk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200320_VTubeUniversity_vtl_v3_endscan_technique_rev2.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200306: VTube-LASER Correction of an OMCG Wire Bender====<br />
(HEXAGON RA7-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a corrections loop between VTube-LASER and an OMCG wire bender.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_correct_OMCG.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://youtu.be/xFtyRToRwFY YouTube]<br />
* View [https://vimeo.com/396590418 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200306_VTube-LASER_to_OMCG_Corrections_at_Ohio_Precision_Products.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
You can manually setup the Ethernet port following the steps in this short video.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_setupethnernetHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20200225_vtl_v3_Windows10_Ethernet_Setup_For_HEXAGON_RDS.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Switching from probe to laser is easy with the three-way toggle button.<br />
<br />
(Using a HEXAGON RA8 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_switchingprobesHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389798661 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200206_vtl_v3.0_how%20to%20switch%20from%20ball%20to%20laser%20in%20HEXAGON%20RS8%20Arms.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.21===<br />
<br />
====Video 20200204: How to Measure a Bend Radius with Bend Profile Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Bend Profile measure process to measure a bend radius.<br />
<br />
(Using a FARO Quantum ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.21_bendprofilescan_faroquantum.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389291065 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_bendprofilescan_faroquantum.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE. <br />
<br />
(Using a HEXAGON 8325 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles_002.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/384896663 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.21_cornerprofile_demo_2.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 110: Corner Profile Measure Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER can easily measure corner profiles.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/360026684 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 107: Corrections Loop with SOCO Beckhoff Controls====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_soco_beckhoff_communications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/356003359 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_SOCO_SV-M_Protocol.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.20===<br />
<br />
====Video 105: Measuring a Part with 180-Degree Bends====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows VTube-LASER scanning through a part with two 180-degree bends.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.20.video_hvac_dual180.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/345144160 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.20_hvac_dual_split_bend_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.19===<br />
<br />
====Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_different_tube_types_scanned.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332490313 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_quickscan_multiple_part_types.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_timer_accept_button.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332124282 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_accepttimer.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 102: VTube-LASER is Now Compatible with Baces USB Arms====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER working with a Baces USB arm. <br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_baces_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/329690049 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_BacesArmDemo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.18===<br />
<br />
====Video 101: How Automatic Laser Separation for UniScan Makes Scanning Tubes Easier (HEXAGON Arm)====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the Automatic Laser Separation feature introduced in version 2.9.18 on March 15, 2018.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_automatic_laser_separation_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/324467076 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.18_automatic_laser_separation_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_calculate_true_radius_180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.18_measure_180_degree_bend_radius.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_reverse_RZR_side_by_side.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320630910 Vimeo]<br />
* View [https://youtu.be/Qpn8Iyl_RwU YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_reverse_rzr_side_by_side.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 98: About the Small Diameter Warning ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how Small Diameter Warning works along with its setup.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_small_diameter_warning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320355578 Vimeo]<br />
* View [https://youtu.be/uT_PN-lNsz8 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-step/vtube_v2.9.18_minimum_diameter_warning.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 96: VTube-STEP and VTube-LASER New Radius Features ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See the new radius features in this video. In Part Setup:<br />
* Renamed "Radius 1" (renamed from Default Radius)<br />
* New "Radius 2" field<br />
* New "Radius 3" field<br />
<br><br />
In Parametric Tube grid windows:<br><br />
* See how to quickly set the radii for all bends using the synchronize radius feature.<br />
<br />
</td><br />
<td width=200><br />
[[image:vtube_v2.9.18.video_newradius_features.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/317137310 Vimeo]<br />
* View [https://youtu.be/DN_bhnMWCPI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.18_new_syncradlevels.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.17===<br />
<br />
====Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer ====<br />
<br />
Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.18.video_RbSABendPro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/315983373 Vimeo]<br />
* View [https://youtu.be/RLCXQt34Alw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_bendpro_communications.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_hexagon_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309191006 Vimeo]<br />
* View [https://youtu.be/kRwrjV9AqZA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_hexagon_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 93: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the FARO QUANTUM SCANARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_faro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309031852 Vimeo]<br />
* View [https://youtu.be/mt3Wn30EQIs YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_faro_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 92: Measuring part "VTube-LASER Demo 5" with MicroScribe in Version 2.9.17 ====<br />
<br />
This video shows how to measure demo part 5 with version 2.9.17 of VTube-LASER. (Released in December 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_microscribe_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/308642989 Vimeo]<br />
* View [https://youtu.be/_aZg3KpVDis YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.17_microscribe_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 91: How To Reverse-Engineer to STEP file with a FARO ScanArm Using VTube-LASER ====<br />
<br />
This video shows how to reverse-engineer a tube to STEP file. Michael Cone is using VTube-LASER 2.9.17 and a FARO Quantum S ScanArm.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_reverse_faro.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/301420583 Vimeo]<br />
* View [https://youtu.be/N9CcloLF-jQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_reverse-engineer-to-STEP.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.16===<br />
<br />
====Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER ====<br />
<br />
This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.16._attach_and_use_RA8_scanner.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/298226309 Vimeo]<br />
* View [https://youtu.be/GQnAAGLJ-Sc YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.16_ROMER8_HowToAttachAndUseScanner.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.14===<br />
<br />
<br />
====Video 89: MEASURING SMALL TUBES with MICROSCRIBE ====<br />
<br />
<table width=600><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to measure small tubes with the MicroScribe i arm using VTube-LASER.</td><br />
<td width=200><br />
[[image:VTL MicroScribe Video 4.png|300px]]<br><br />
</td><br />
<td width=200><br />
* View on [https://vimeo.com/288409692 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.14_microscribe_dual_split_bend_0.1875.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br />
<br />
===Version 2.9.12===<br />
<br />
====Video 88: VTube-LASER and VTube-STEP Unlimited NOTE LIST Feature ====<br />
<br />
This video shows the new unlimited NOTE LIST feature that allows you to add any number of notes to a VTube project.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.12_notelist_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/285420883 Vimeo]<br />
* View [https://youtu.be/N5kGhWQjFHA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.12_noteslist_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.11===<br />
<br />
====Video 87: VTube-LASER's IMPROVED SQUARE TUBE SCANNING (FARO) ====<br />
<br />
This video shows the improved square-tube scanning feature in version 2.9.11 using a FARO ScanArm.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.11_squaretubescanningfaro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/279182056 Vimeo]<br />
* View [https://youtu.be/0viGl_CnzlM YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.11_scanning_square_tube_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.10===<br />
<br />
====Video 86: VTube-LASER's LASER SCAN FILTER SOUND ====<br />
<br />
This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.10._laserscanfilter_sound.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/278343562 Vimeo]<br />
* View [https://youtu.be/lAmLVzMHatw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_romer_laserscanfilter_sound.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 85: Using VTube-LASER to Supply SOLIDWORKS with Data for Parametric Overlay ====<br />
<br />
This video shows a workflow that allows you to reverse-engineer a Y-pipe sample into SOLIDWORKS. The workflow uses a parametrically-controlled template file in SOLIDWORKS that was created to overlay the scanned-in data for an approximate match. This is an advanced topic for SOLIDWORKS users that concentrates mainly on how it is possible to handle parametric control inside SOLIDWORKS with the help of VTube-LASER scanning.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_reverse-engineering_Y_pipe_parametric_overlay_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER.v2.9.10_ReverseEngineeringToAParametricPart.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 84: Measuring Convoluted Tube and Wire with VTube-LASER ====<br />
<br />
This video shows VTube-LASER's ability to measure extremely convoluted parts. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_convoluted_tube_and_wire_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/277725088 Vimeo]<br />
* View on [https://youtu.be/ZkZm3bFHzog YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_convoluted_tube_wire_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.9===<br />
<br />
<br />
====Video 83: How to Use VTube-STEP and VTube-LASER to Setup and Correct a UNISON Bender ====<br />
<br />
This video shows how to use VTube to setup and correct a Unison bender from model through finished part.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vvtl_2.9.9_setup and correct a unison bender video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/276530203 Vimeo]<br />
* View on [https://youtu.be/4cDtx3Zgzwk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.9_correcting_unison_benders.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.8===<br />
<br />
<br />
====Video 82: Using MTA x 3 To Measure Highly Deformed Exhaust Pipes ====<br />
<br />
This video shows using a three-measure MTA (Measured Tube Average) feature to reduce the deviations due to deformation by 50% in a highly deformed exhaust pipe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.8_mta3_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/271371983 Vimeo]<br />
* View on [https://youtu.be/CWAWzvPRISI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.8_mta3_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 81: SOCO Bender Correction ====<br />
<br />
This video was taken at the TFS open house in Elkhart, Indiana in May, 2018. It shows an actual bender correction and its result after one correction.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.8_sococorrection.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/269557993 Vimeo]<br />
* View on [https://youtu.be/c_txfQvZuX4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_2.9.8_SOCO_Corrections_Loop.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
<br />
<br />
====Video 80: TRAX Rail Arm Extender ====<br />
<br />
This video shows a quick intro to the TRAX Rail system that extend the reach of a measuring center either 1800mm or 3500mm depending on the model.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-TRAX_Video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/268826288 Vimeo]<br />
* View on [https://youtu.be/DVn_2V5PnXo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/AdvancedTubularTrax_VTube-LASER_1800_ROMER.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.7===<br />
<br />
====Video 79: EXPORT REPORTS to EXTERNAL NETWORK LOCATIONS ====<br />
<br />
This video demonstrates how to export a report to an external network location.<br><br><br />
This allows anyone with access to the network path to view VTube-LASER reports in a web browser.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-V2.9.7_ExportHTMLReportToPath.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.7_exportreports.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.4===<br />
<br />
====Video 78: VTube-LASER Corrects an SMT Bender ====<br />
<br />
This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.4_smtcorrection_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/256176430 Vimeo]<br />
* View on [https://youtu.be/YUwPGsUeiP4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl%20smtvideo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.3===<br />
<br />
====Video 77: Build Entire Assemblies to SOLIDWORKS ====<br />
<br />
This video demonstrates how this version of VTube-LASER can build entire assemblies to SOLIDWORKS for you in less than a minute with the press of a couple of buttons.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_swassembly_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/253353260 Vimeo]<br />
* View on [https://youtu.be/SdGz11P5uGQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_sw_assemblies.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 76: Use the Measured Tube Averaging (MTA) Feature for Super Accurate Measurements ====<br />
<br />
This video demonstrates how the MTA feature can measure both sides of the same tube to create a measured tube average for more reliable tube shape calculation.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' ROMER Absolute Arm 7325SI<br><br><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252767821 Vimeo]<br />
* View on [https://youtu.be/cJ8ts3QflKo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' FARO Quantum S ScanArm<br><br></td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252786153 Vimeo]<br />
* View on [https://youtu.be/w9IgI0G-gUo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Other Pages===<br />
<br />
* See [[Retired VTube-LASER Videos]]<br />
* Back to [[VTube-LASER]]</div>Mconehttp://www.advancedtubular.wiki/index.php/VTube-LASER_Videos_for_HEXAGON_ROMERVTube-LASER Videos for HEXAGON ROMER2023-02-24T18:59:33Z<p>Mcone: /* Version 4 */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=300><br />
<br />
See a list of VTube-LASER videos for ROMER Absolute Arms from HEXAGON on this page.<br><br><br />
* Back to [[VTube-LASER]] Knowledgebase Page<br><br />
* Back to the [[VTube-LASER Videos]] Page<br><br><br />
</td><br />
<td width=300><br />
[[image:VTube-LASER_Videos_HEXAGON_ROMER.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
__NOTOC__<br />
<br />
<br />
<br />
<br />
<br />
<br />
===Version 4===<br />
<br />
====Video 20230224: Important Tips for End-Straight/End Scanning ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone, the lead developer for VTube-LASER shows how to get reliable end point locations from proper end straight scanning techniques.<br />
<td width=200><br />
[[image:vtl_v4_TipsForEndStraightScanning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230224_ImportantTipsForEndStraightScanning.mp4 MP4]<br />
* View video [https://vimeo.com/802070332 Vimeo]<br />
* View video [https://youtu.be/k-Qkm8OJEfk YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230206: How to learn, test, and use the DCP (Diameter Cut Plane) to measure tube straights that are near other objects ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to learn, test, and use the DCP feature to measure tubes that run near other objects.<br />
<td width=200><br />
[[image:vtl_v4_DCPTutorial.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230206_DiameterCutPlaneTutorial.mp4 MP4]<br />
* View video [https://vimeo.com/796424925 Vimeo]<br />
* View video [https://youtu.be/CLcExwN-pTA YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220908: Sneak Peek Preview - Shallow Bend Logic in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Shallow Bend logic coming in version 4 of VTube-LASER which increases bend point location placement by up to 10 times.<br />
<td width=200><br />
[[image:vtl_v4_ShallowBendVideo_v2c.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220906_VTube-LASER_v4_ShallowBendMeasureLogic.mp4 MP4]<br />
* View Video [https://vimeo.com/747812907 Vimeo]<br />
* View Video [https://youtu.be/ZosWxq4A4NU YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.2===<br />
<br />
====Video 20220629: How Set Up to Correct SMI Benders with VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows set up VTube-LASER to correct SMI benders.<br />
<td width=200><br />
[[image:vtl_v3.2_SMIBenderCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220629_VTube-LASER_SMI_Corrections.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220513: How To Measure Square Tube with VTube-LASER and the HEXAGON Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import square models, then measure, correct tube benders, and qualify square tube shapes using a HEXAGON scan arm and VTube-LASER.<br />
<td width=200><br />
[[image:vtl_v3.2b755_SquareTubeVideo_Hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220513_VTube-LASER_MeasureSquare_HEXAGON_ScanArm.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.<br />
<td width=200><br />
[[image:vtl_v3.2b750_CNCBenderBenderlinkVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220421_VTube-LASER_to_CNC_Bender_Communications_Setup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220331: Improved Best Fit For Shallow Bends====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how this version of VTube-LASER has an improved Best Fit algorithm designed to handle tubes with shallow bends.<br />
<td width=200><br />
[[image:vtl_v3.2b714_BestFitShallowBend.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220331_v3.2_b714_BestFitShallowBendLogic.mp4 MP4]<br />
* View [https://vimeo.com/694643426 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.1===<br />
<br />
====Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to calculate tube elongation percentage with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20220113_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_training%20video%2015%20-%20How%20to%20Calculate%20the%20Tube%20Elongation%20Percentage.mp4 MP4]<br />
* View [https://vimeo.com/665826780 Vimeo]<br />
* View [https://youtu.be/a0bc6IpbWb0 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
====Video 20211207: VTube-LASER Correction for Han Jie Benders====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638)<br />
<br />
<td width=200><br />
[[image:20211207_VTube-LASER_to_HanJie_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER_HanJie_Promotional.mp4 MP4]<br />
* View [https://vimeo.com/654364120 Vimeo]<br />
* View [https://youtu.be/ym8LbFUpyow YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===Version 3.0===<br />
<br />
====Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)<br />
<br />
<td width=200><br />
[[image:20210702_TangentPointEntryGrid.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_b555_tangent_point_entry_grid.mp4 MP4]<br />
* View [https://vimeo.com/571874446 Vimeo]<br />
* View [https://youtu.be/C9yLbhoWlSE YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021)<br />
<br />
<td width=200><br />
[[image:20210622_End_Scan_Flier_Filter_Promo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_endscanflierfilter_promo.mp4 MP4]<br />
* View [https://vimeo.com/567104555 Vimeo]<br />
* View [https://youtu.be/RfWxFa6fEFk YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210505: How To Determine Positive and Negative Rotation Directions====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube.<br />
<br />
<td width=200><br />
[[image:20210505_Positive_Rotation_Direction.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_positive_rotation_direction.mp4 MP4]<br />
* View [https://vimeo.com/545519786 Vimeo]<br />
* View [https://youtu.be/CL7L-rZbVDQ YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210503: Automatic Reverse Calc====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513.<br />
<br />
<td width=200><br />
[[image:20210503_AutomaticReverseCalcVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vt_v3_b513_automatic_reverse_calc.mp4 MP4]<br />
* View [https://vimeo.com/545518519 Vimeo]<br />
* View [https://youtu.be/-rh5eNA8tIA YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210421: Why and How to Use MTA (Measured Tube Averaging)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows the why and how of MTA.<br />
<br />
<td width=200><br />
[[image:20210421_MTAVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_mta_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/541156704 Vimeo]<br />
* View [https://youtu.be/gGSAR-a6m3Q YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100413: VTube v3 NPS Values Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how to use the new NPS values in VTube.<br />
<br />
<td width=200><br />
[[image:20210413_NPSVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_nps_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/536497747 Vimeo]<br />
* View [https://youtu.be/RcKawANCpWY YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100406: VTube-LASER Reverse Engineering Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210406_ReverseEngineeringVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_reverse_engineering_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/533692712 Vimeo]<br />
* View [https://youtu.be/7N_-0d_Mjp4 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210330: VTube-LASER to Transfluid Bender Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to communicate with Transfluid tProject bender software.<br />
<br />
<td width=200><br />
[[image:20210330_TransfluidTProjectCommunications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_transfluid_tproject_communications.mp4 MP4]<br />
* View [https://vimeo.com/531073455 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210313: How to Enter Bender Data of Different Types in the Same Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data.<br />
<br />
<td width=200><br />
[[image:20210313_ImportMixedBenderData.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_entering_mixed_bender_data_types.mp4 MP4]<br />
* View [https://vimeo.com/523279713 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210310: How to Import New Report Templates====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import new report templates into VTube-STEP and VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210310_ImportReportTemplates.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_importingreporttemplates.mp4 MP4]<br />
* View [https://vimeo.com/522027683 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes.<br />
<br />
<td width=200><br />
[[image:20201221_UTESelectCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_UTE_Select_Corrections_Hexagon.mp4 MP4]<br />
* View [https://vimeo.com/493550553 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights.<br />
<br />
<td width=200><br />
[[image:20201111B_autocopydefaulttolerance.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_automatic_copy_of_default_tolerance.mp4 MP4]<br />
* View [https://vimeo.com/478271550 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges.<br />
<br />
<td width=200><br />
[[image:20201111_precisionweightcontrolalignment.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_precision_weight_control_alignment.mp4 MP4]<br />
* View [https://vimeo.com/478127038 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm.<br />
<br />
<td width=200><br />
[[image:20200930_measuring_od_end_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_qualifying_endscan_profiles_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/463607514 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports_hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/461988796 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner.<br />
<br />
<td width=200><br />
[[image:20200722_RA7520_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* Download [https://vimeo.com/440788274 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_ra-7520_SI_ScanningTube.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200709: Real-time Overall Scan Scores Build Confidence====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how VTube-LASER scan scoring system helps users know they are measuring well.<br />
<br />
<td width=200><br />
[[image:20200709_scanscore_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_realtime_scanscore.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200609: How to Use Multiple Versions of the Same Part in One Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to create multiple versions of the same part in one project. Each version can then be used to measure the part at various stages of the fabrication process.<br />
<br />
<td width=200><br />
[[image:20200609_multiple_versions_parts_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_multiple_versions_of_same_part.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200515: How Import 180-degree Bend Models====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models with 180-degree bends.<br />
<br />
<td width=200><br />
[[image:20200515_import180_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_import_180-degree_bend_models.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200514: How to Change Languages in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to change languages in the VTube-LASER and VTube-STEP user interface.<br />
<br />
<td width=200><br />
[[image:20200514_changelanguges_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_change_languages.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar.<br />
<br />
<td width=200><br />
[[image:20200331_training_hexagon_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402756704 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402756704/45b8f394d8 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl3_verify_hexagon_with_cyl_length_bar.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200320: VTube UNIVERSITY Training Video: End Scans====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_training_endscan_technique.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399358340 Vimeo]<br />
* View [https://youtu.be/qb9G15eQGpk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200320_VTubeUniversity_vtl_v3_endscan_technique_rev2.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200309: Corrections with the OMCG Wire Bender====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a corrections loop between VTube-LASER and an OMCG wire bender.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_correct_OMCG.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://youtu.be/xFtyRToRwFY YouTube]<br />
* View [https://vimeo.com/396590418 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200306_VTube-LASER_to_OMCG_Corrections_at_Ohio_Precision_Products.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
You can manually setup the Ethernet port following the steps in this short video.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_setupethnernetHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20200225_vtl_v3_Windows10_Ethernet_Setup_For_HEXAGON_RDS.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Switching from probe to laser is easy with the three-way toggle button.<br />
<br />
(Using a HEXAGON RA8 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_switchingprobesHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389798661 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200206_vtl_v3.0_how%20to%20switch%20from%20ball%20to%20laser%20in%20HEXAGON%20RS8%20Arms.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.21===<br />
<br />
<br />
====Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE. <br />
<br />
(Using a HEXAGON 8325 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles_002.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/384896663 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.21_cornerprofile_demo_2.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 107: Corrections Loop with SOCO Beckhoff Controls====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_soco_beckhoff_communications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/356003359 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_SOCO_SV-M_Protocol.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.19===<br />
<br />
====Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_different_tube_types_scanned.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332490313 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_quickscan_multiple_part_types.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_timer_accept_button.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332124282 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_accepttimer.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.18===<br />
<br />
====Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_calculate_true_radius_180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.18_measure_180_degree_bend_radius.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_reverse_RZR_side_by_side.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320630910 Vimeo]<br />
* View [https://youtu.be/Qpn8Iyl_RwU YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_reverse_rzr_side_by_side.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 98: About the Small Diameter Warning ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how Small Diameter Warning works along with its setup.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_small_diameter_warning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320355578 Vimeo]<br />
* View [https://youtu.be/uT_PN-lNsz8 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-step/vtube_v2.9.18_minimum_diameter_warning.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 96: VTube-STEP and VTube-LASER New Radius Features ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See the new radius features in this video. In Part Setup:<br />
* Renamed "Radius 1" (renamed from Default Radius)<br />
* New "Radius 2" field<br />
* New "Radius 3" field<br />
<br><br />
In Parametric Tube grid windows:<br><br />
* See how to quickly set the radii for all bends using the synchronize radius feature.<br />
<br />
</td><br />
<td width=200><br />
[[image:vtube_v2.9.18.video_newradius_features.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/317137310 Vimeo]<br />
* View [https://youtu.be/DN_bhnMWCPI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.18_new_syncradlevels.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer ====<br />
<br />
Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.18.video_RbSABendPro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/315983373 Vimeo]<br />
* View [https://youtu.be/RLCXQt34Alw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_bendpro_communications.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.17===<br />
<br />
<br />
====Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_hexagon_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309191006 Vimeo]<br />
* View [https://youtu.be/kRwrjV9AqZA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_hexagon_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.16===<br />
<br />
====Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER ====<br />
<br />
This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.16._attach_and_use_RA8_scanner.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/298226309 Vimeo]<br />
* View [https://youtu.be/GQnAAGLJ-Sc YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.16_ROMER8_HowToAttachAndUseScanner.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.10===<br />
<br />
====Video 86: VTube-LASER's LASER SCAN FILTER SOUND ====<br />
<br />
This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.10._laserscanfilter_sound.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/278343562 Vimeo]<br />
* View [https://youtu.be/lAmLVzMHatw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_romer_laserscanfilter_sound.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 84: Measuring Convoluted Tube and Wire with VTube-LASER ====<br />
<br />
This video shows VTube-LASER's ability to measure extremely convoluted parts with a ROMER Absolute Arm with Integrated Scanner. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_convoluted_tube_and_wire_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/277725088 Vimeo]<br />
* View on [https://youtu.be/ZkZm3bFHzog YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_convoluted_tube_wire_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.4===<br />
<br />
====Video 78: VTube-LASER Corrects an SMT Bender Using a ROMER Absolute Arm ====<br />
<br />
This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.4_smtcorrection_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/256176430 Vimeo]<br />
* View on [https://youtu.be/Me3l7Ob45tQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl%20smtvideo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2===<br />
<br />
====Video 2: SCANNING SPEED TEST ON TWO TYPES OF TUBES ====<br />
<br />
<table width=600><br />
<tr><br />
<td width=300><br />
This video shows speed tests on two very different kinds of tube shapes:<br><br><br />
<br />
# An Exhaust Pipe<br><br><br />
# A copper HVAC tube with two 180-degree bends</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.2_romer_speed_test_video.png|300px]]<br><br />
</td><br />
<td width=200><br />
* View on [https://vimeo.com/245475657 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.2_romer_speed_tests.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br />
<br />
====Video 1: INTRODUCING VTUBE-LASER MEASURING WITH A ROMER ABSOLUTE ARM ====<br />
<br />
<table width=600><br />
<tr><br />
<td width=300><br />
As of November 1, 2017, VTube-LASER can measure tubes with ROMER Absolute Arms from HEXAGON. This video shows a measurement of a tube using a 3.5 meter ROMER arm.</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9_First_ROMER_video.png|300px]]<br><br />
</td><br />
<td width=200><br />
* View on [https://vimeo.com/241096894 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20171102_VTube-LASER_HEXAGON_ROMER_Scanning.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br />
<br />
===Other Pages===<br />
<br />
* Back to [[VTube-LASER]]</div>Mconehttp://www.advancedtubular.wiki/index.php/VTube-LASER_VideosVTube-LASER Videos2023-02-24T18:59:03Z<p>Mcone: </p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=300><br />
<br />
See a complete list of VTube-LASER videos on this page.<br><br><br />
<br />
* Back to [https://www.advancedtubulartech.com/vtube-laser the Main VTube-LASER] web page<br><br><br />
* Back to [[VTube-LASER]] Knowledgebase Page<br><br><br />
* Note: VTube-STEP is included with every VTube-LASER installation. You can watch '''VTube-STEP videos''' in the [[VTube-STEP Videos]] page.<br><br><br />
* See [[Retired VTube-LASER Videos]]<br />
</td><br />
<td width=300><br />
[[image:vtube-laser_videos.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
__NOTOC__<br />
<br />
==Video Subpages Related to Specific Arms==<br />
Click on the images to enter the video subpages with videos for specific arms.<br><br><br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTube-LASER_Videos_HEXAGON_ROMER.png|200px|link=VTube-LASER Videos for HEXAGON ROMER]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:vtube-laser_video_FARO.png|200px|link=VTube-LASER Videos for FARO|]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos Kreon.png|200px|link=VTube-LASER Videos for Kreon]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos MicroScribe.png|200px|link=VTube-LASER Videos for MicroScribe]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
<br><br><br><br><br />
<br />
==Latest Videos==<br />
<br />
===Version 4===<br />
<br />
<br />
====Video 20230224: Important Tips for End-Straight/End Scanning ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone, the lead developer for VTube-LASER shows how to get reliable end point locations from proper end straight scanning techniques.<br />
<td width=200><br />
[[image:vtl_v4_TipsForEndStraightScanning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230224_ImportantTipsForEndStraightScanning.mp4 MP4]<br />
* View video [https://vimeo.com/802070332 Vimeo]<br />
* View video [https://youtu.be/k-Qkm8OJEfk YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230206: How to learn, test, and use the DCP (Diameter Cut Plane) to measure tube straights that are near other objects ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to learn, test, and use the DCP feature to measure tubes that run near other objects.<br />
<td width=200><br />
[[image:vtl_v4_DCPTutorial.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230206_DiameterCutPlaneTutorial.mp4 MP4]<br />
* View video [https://vimeo.com/796424925 Vimeo]<br />
* View video [https://youtu.be/CLcExwN-pTA YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230112: How to Export to Microsoft Excel from VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the different ways to export from VTube-STEP and VTube-LASER to Microsoft Excel.<br />
<td width=200><br />
[[image:vtl_v4_MicrosoftExcelVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230112_ExportingToExcel_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/789311957 Vimeo]<br />
* View video [https://youtu.be/noSSut2RMYg YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230106: Easy Fine-tuning for Bender Corrections with Correction Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to quickly reduce bender adjustments using Correction Percentage.<br />
<td width=200><br />
[[image:vtl_v4_CorrectionPercentageVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230106_VTube-LASER_v4_CorrectionPercentage.mp4 MP4]<br />
* View video [https://vimeo.com/787736630 Vimeo]<br />
* View video [https://youtu.be/deLKsd3LDU4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20221006: GD&T Perpendicularity Tutorial for End Trim Profile Measure Process====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the End Trim Profile measure process to calculate GD&T perpendicularity.<br />
<td width=200><br />
[[image:vtl_v4_EndTrimProfileMeasureVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20221005_EndTrimProfile_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/757282746 Vimeo]<br />
* View video [https://youtu.be/kQKgeSerbz8 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220927: Measuring a Can-Am Maverick Radius Rod with VTube-LASER Space Objects====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Calvin Nichoson (VTube-LASER Technician) measuring a Can-Am Maverick radius rod with VTube-LASER version 4 Space Objects.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_Can-Am.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220926_VTL_Can-AmMaverickX3LowerRadiusRod_Measure.mp4 MP4]<br />
* View video [https://vimeo.com/754344224 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220912: Sneak Peek Preview - Space Objects Feature in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Space Object feature coming in version 4 of VTube-LASER.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_v2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220912_SneakPeekPreviewSpaceObjects.mp4 MP4]<br />
* View video [https://vimeo.com/749197784 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220908: Sneak Peek Preview - Shallow Bend Logic in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Shallow Bend logic coming in version 4 of VTube-LASER which increases bend point location placement by up to 10 times.<br />
<td width=200><br />
[[image:vtl_v4_ShallowBendVideo_v2c.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220906_VTube-LASER_v4_ShallowBendMeasureLogic.mp4 MP4]<br />
* View Video [https://vimeo.com/747812907 Vimeo]<br />
* View Video [https://youtu.be/ZosWxq4A4NU YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.2===<br />
<br />
====Video 20220823: Automatic Global Configuration Backup File Location====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube making automatic backups of the Global Configuration file.<br />
<br><br><br />
The backup files ensure that you never lose the configuration of the global configuration file. If the configuration is lost, then it can be easily recovered with these files.<br />
<td width=200><br />
[[image:vtl_videoimage_backupglobalconfig.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220823_VTube_Global_Config_Backup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220819: Overview of VTube-LASER to COMCO Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows an overview of communications to the COMCO benders using VTube-LASER<br />
<td width=200><br />
[[image:vtl_videoimage_comcooverview.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220819_COMCO_Bender_Corrections_In_VTube-LASER.mp4 MP4]<br />
* See PDF [https://www.advancedtubular.com/vtube-laser/20210817-How_To_Export_CSV_from_COMCO.pdf How to Export CSV from COMCO] <br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220629: How Set Up to Correct SMI Benders with VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows set up VTube-LASER to correct SMI benders.<br />
<td width=200><br />
[[image:vtl_v3.2_SMIBenderCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220629_VTube-LASER_SMI_Corrections.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220603: How To Measure Square and Rectangular Tubing with VTube-LASER and a FARO ScanArm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how use a FARO Quantum ScanArm to measure square or rectangular tubing.<br />
<td width=200><br />
[[image:vtl_v3.2_FaroSquareTubingVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220603_vtl3.2_SquareTube_FARO.mp4 MP4]<br />
* View [https://vimeo.com/716899246 Vimeo] <br />
* View [https://youtu.be/rhohh9X3bU0 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220513: How To Measure Square Tube with VTube-LASER Using a HEXAGON Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models, measure them, correct tube benders to adjust the shape, and then qualify square tube shapes using VTube-LASER Corner Profile measure process.<br />
<td width=200><br />
[[image:vtl_v3.2b755_SquareTubeVideo_Hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220513_VTube-LASER_MeasureSquare_HEXAGON_ScanArm.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br><br />
<br />
====Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.<br />
<td width=200><br />
[[image:vtl_v3.2b750_CNCBenderBenderlinkVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220421_VTube-LASER_to_CNC_Bender_Communications_Setup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220420: Measuring 180-degree Bends with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure 180-degree bends with the Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b750_Kreon180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220420_vtl_Kreon_180-Degree_Bends_rev2.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220413: Square Tube Measuring with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows square tube measuring using a Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b744_KreonSquareTube.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220413_vtl_v3.2_kreon_square_tube.mp4 MP4]<br />
* View [https://vimeo.com/699270748 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220331: Improved Best Fit For Shallow Bends====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how this version of VTube-LASER has an improved Best Fit algorithm designed to handle tubes with shallow bends.<br />
<td width=200><br />
[[image:vtl_v3.2b714_BestFitShallowBend.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220331_v3.2_b714_BestFitShallowBendLogic.mp4 MP4]<br />
* View [https://vimeo.com/694643426 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.1===<br />
====Video 20220221-C: Aligning the Kreon Scanner in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to align the Kreon scanner to the Kreon arm in VTube-LASER before you start using the Kreon arm the first time.<br />
<br />
<td width=200><br />
[[image:kreon_video3.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_scanner_positioning_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220221-B: Controlling the Kreon Video Settings Properly ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter and control the values in the Kreon Video Settings window.<br />
<br />
<td width=200><br />
[[image:kreon_video4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_video_setup_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220221: Verifying VTube-LASER and Kreon with a Test Cylinder====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and use a test cylinder to verify your measuring system at the beginning of each day.<br />
<br />
<td width=200><br />
[[image:kreon_video2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_test_cylinder_setup.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
====Video 20220216: VTube-LASER Using a Kreon Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the connection to a Kreon ACES scan arm with a Solano blue line scanner.<br />
<br />
<td width=200><br />
[[image:kreon_video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v3.1_kreon_intro.mp4 MP4]<br />
* View [https://vimeo.com/678223398 Vimeo]<br />
* View [https://youtu.be/6o7W38-q1lU YouTube]<br />
<br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to calculate tube elongation percentage with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20220113_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_training%20video%2015%20-%20How%20to%20Calculate%20the%20Tube%20Elongation%20Percentage.mp4 MP4]<br />
* View [https://vimeo.com/665826780 Vimeo]<br />
* View [https://youtu.be/a0bc6IpbWb0 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20211207: VTube-LASER Correction for Han Jie Benders====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638)<br />
<br />
<td width=200><br />
[[image:20211207_VTube-LASER_to_HanJie_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER_HanJie_Promotional.mp4 MP4]<br />
* View [https://vimeo.com/654364120 Vimeo]<br />
* View [https://youtu.be/ym8LbFUpyow YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===Version 3.0===<br />
<br />
====Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)<br />
<br />
<td width=200><br />
[[image:20210702_TangentPointEntryGrid.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_b555_tangent_point_entry_grid.mp4 MP4]<br />
* View [https://vimeo.com/571874446 Vimeo]<br />
* View [https://youtu.be/C9yLbhoWlSE YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021)<br />
<br />
<td width=200><br />
[[image:20210622_End_Scan_Flier_Filter_Promo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_endscanflierfilter_promo.mp4 MP4]<br />
* View [https://vimeo.com/567104555 Vimeo]<br />
* View [https://youtu.be/RfWxFa6fEFk YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210505: How To Determine Positive and Negative Rotation Directions====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube.<br />
<br />
<td width=200><br />
[[image:20210505_Positive_Rotation_Direction.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_positive_rotation_direction.mp4 MP4]<br />
* View [https://vimeo.com/545519786 Vimeo]<br />
* View [https://youtu.be/CL7L-rZbVDQ YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210503: Automatic Reverse Calc====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513.<br />
<br />
<td width=200><br />
[[image:20210503_AutomaticReverseCalcVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vt_v3_b513_automatic_reverse_calc.mp4 MP4]<br />
* View [https://vimeo.com/545518519 Vimeo]<br />
* View [https://youtu.be/-rh5eNA8tIA YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210421: Why and How to Use MTA (Measured Tube Averaging)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows the why and how of MTA.<br />
<br />
<td width=200><br />
[[image:20210421_MTAVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_mta_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/541156704 Vimeo]<br />
* View [https://youtu.be/gGSAR-a6m3Q YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100413: VTube v3 NPS Values Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how to use the new NPS values in VTube.<br />
<br />
<td width=200><br />
[[image:20210413_NPSVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_nps_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/536497747 Vimeo]<br />
* View [https://youtu.be/RcKawANCpWY YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100406: VTube-LASER Reverse Engineering Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210406_ReverseEngineeringVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_reverse_engineering_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/533692712 Vimeo]<br />
* View [https://youtu.be/7N_-0d_Mjp4 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210330: VTube-LASER to Transfluid Bender Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to communicate with Transfluid tProject bender software.<br />
<br />
<td width=200><br />
[[image:20210330_TransfluidTProjectCommunications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_transfluid_tproject_communications.mp4 MP4]<br />
* View [https://vimeo.com/531073455 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210313: How to Enter Bender Data of Different Types in the Same Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data.<br />
<br />
<td width=200><br />
[[image:20210313_ImportMixedBenderData.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_entering_mixed_bender_data_types.mp4 MP4]<br />
* View [https://vimeo.com/523279713 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210310: How to Import New Report Templates====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import new report templates into VTube-STEP and VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210310_ImportReportTemplates.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_importingreporttemplates.mp4 MP4]<br />
* View [https://vimeo.com/522027683 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210212: Switch the FARO Scanner ON and OFF Manually====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Use this process to quickly switch the FARO scanner on or off manually.<br />
<br />
<td width=200><br />
[[image:20210212_FARO_Scanner_ONOFF.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_20210212_FARO_Scanner_Laser_On_Off.mp4 MP4]<br />
* View [https://vimeo.com/511726559 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes.<br />
<br />
<td width=200><br />
[[image:20201221_UTESelectCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_UTE_Select_Corrections_Hexagon.mp4 MP4]<br />
* View [https://vimeo.com/493550553 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201117: Calculate Centerline Radii Using Measure Bend Profile (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Quickly and accurately measure the centerline radius using the Measure Bend Profile process.<br />
<br />
<td width=200><br />
[[image:20201117_measurebendprofile_bendradii.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_bend_profile_scan_for_radius_faro.mp4 MP4]<br />
* View [https://vimeo.com/480569055 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights.<br />
<br />
<td width=200><br />
[[image:20201111B_autocopydefaulttolerance.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_automatic_copy_of_default_tolerance.mp4 MP4]<br />
* View [https://vimeo.com/478271550 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges.<br />
<br />
<td width=200><br />
[[image:20201111_precisionweightcontrolalignment.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_precision_weight_control_alignment.mp4 MP4]<br />
* View [https://vimeo.com/478127038 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm.<br />
<br />
<td width=200><br />
[[image:20200930_measuring_od_end_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_qualifying_endscan_profiles_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/463607514 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports_hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/461988796 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200923: How to Measure and Qualify Ports on a Tube Using Assembly (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_faro.mp4 MP4]<br />
* View [https://vimeo.com/461239022 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200804: Measuring a Brake Line with a FARO EDGE Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER measuring a brake line with a legacy FARO Edge Scan Arm.<br />
<br />
<td width=200><br />
[[image:2020804_Brake_Line_FAROEdge.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_faro_edge_brake_line.mp4 MP4]<br />
* View [https://vimeo.com/444720352 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner.<br />
<br />
<td width=200><br />
[[image:20200722_RA7520_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/440788274 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_ra-7520_SI_ScanningTube.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200709: Real-time Overall Scan Scores Build Confidence (HEXAGON RA8)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how VTube-LASER scan scoring system helps users know they are measuring well.<br />
<br />
<td width=200><br />
[[image:20200709_scanscore_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_realtime_scanscore.mp4 MP4]<br />
* View [https://vimeo.com/437000592 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200609: How to Use Multiple Versions of the Same Part in One Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to create multiple versions of the same part in one project. Each version can then be used to measure the part at various stages of the fabrication process.<br />
<br />
<td width=200><br />
[[image:20200609_multiple_versions_parts_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_multiple_versions_of_same_part.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
====Video 20200515: How Import 180-degree Bend Models====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models with 180-degree bends.<br />
<br />
<td width=200><br />
[[image:20200515_import180_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_import_180-degree_bend_models.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 20200514: How to Change Languages in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to change languages in the VTube-LASER and VTube-STEP user interface.<br />
<br />
<td width=200><br />
[[image:20200514_changelanguges_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_change_languages.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200406: Measure Corner Profile with VTube-LASER and FARO Quantum====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure a corner profile shape with the Corner Profile measure process using a FARO Quantum arm.<br />
<br />
<td width=200><br />
[[image:20200406_cornerprofile_faro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/404834117 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/404834117/b97d3500e3 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200406_vtl3_cornerprofile_faro_quantum.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar.<br />
<br />
<td width=200><br />
[[image:20200331_training_hexagon_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402756704 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402756704/45b8f394d8 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl3_verify_hexagon_with_cyl_length_bar.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200327: VTube UNIVERSITY Training Video: Introduction to Import and Measuring Tube Shape Demo Tube 5 with a FARO Arm====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to accompany training document 20200327..002" [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:20200327_trainingdoc002_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402035686 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402035686/bdbb6da5fe Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_Intro_To_Import_And_Measure_VTube-LASER_with_FARO_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200323: VTube UNIVERSITY Training Video: FARO Account Manager Demo Training====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to demonstrate VTube-LASER using a FARO ScanArm.<br><br><br />
This video is a supplement to the demo training document available on [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:vtl_v3.0_training_faro_demonstration.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399899513 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/399899513/aa54eece37 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_demonstrating_vtube-laser_with_faro_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200320: VTube UNIVERSITY Training Video: End Scans====<br />
(HEXAGON RA8-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_training_endscan_technique.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399358340 Vimeo]<br />
* View [https://youtu.be/qb9G15eQGpk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200320_VTubeUniversity_vtl_v3_endscan_technique_rev2.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200306: VTube-LASER Correction of an OMCG Wire Bender====<br />
(HEXAGON RA7-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a corrections loop between VTube-LASER and an OMCG wire bender.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_correct_OMCG.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://youtu.be/xFtyRToRwFY YouTube]<br />
* View [https://vimeo.com/396590418 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200306_VTube-LASER_to_OMCG_Corrections_at_Ohio_Precision_Products.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
You can manually setup the Ethernet port following the steps in this short video.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_setupethnernetHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20200225_vtl_v3_Windows10_Ethernet_Setup_For_HEXAGON_RDS.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Switching from probe to laser is easy with the three-way toggle button.<br />
<br />
(Using a HEXAGON RA8 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_switchingprobesHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389798661 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200206_vtl_v3.0_how%20to%20switch%20from%20ball%20to%20laser%20in%20HEXAGON%20RS8%20Arms.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.21===<br />
<br />
====Video 20200204: How to Measure a Bend Radius with Bend Profile Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Bend Profile measure process to measure a bend radius.<br />
<br />
(Using a FARO Quantum ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.21_bendprofilescan_faroquantum.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389291065 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_bendprofilescan_faroquantum.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE. <br />
<br />
(Using a HEXAGON 8325 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles_002.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/384896663 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.21_cornerprofile_demo_2.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 110: Corner Profile Measure Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER can easily measure corner profiles.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/360026684 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 107: Corrections Loop with SOCO Beckhoff Controls====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_soco_beckhoff_communications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/356003359 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_SOCO_SV-M_Protocol.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.20===<br />
<br />
====Video 105: Measuring a Part with 180-Degree Bends====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows VTube-LASER scanning through a part with two 180-degree bends.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.20.video_hvac_dual180.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/345144160 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.20_hvac_dual_split_bend_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.19===<br />
<br />
====Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_different_tube_types_scanned.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332490313 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_quickscan_multiple_part_types.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_timer_accept_button.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332124282 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_accepttimer.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 102: VTube-LASER is Now Compatible with Baces USB Arms====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER working with a Baces USB arm. <br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_baces_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/329690049 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_BacesArmDemo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.18===<br />
<br />
====Video 101: How Automatic Laser Separation for UniScan Makes Scanning Tubes Easier (HEXAGON Arm)====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the Automatic Laser Separation feature introduced in version 2.9.18 on March 15, 2018.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_automatic_laser_separation_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/324467076 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.18_automatic_laser_separation_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_calculate_true_radius_180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.18_measure_180_degree_bend_radius.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_reverse_RZR_side_by_side.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320630910 Vimeo]<br />
* View [https://youtu.be/Qpn8Iyl_RwU YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_reverse_rzr_side_by_side.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 98: About the Small Diameter Warning ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how Small Diameter Warning works along with its setup.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_small_diameter_warning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320355578 Vimeo]<br />
* View [https://youtu.be/uT_PN-lNsz8 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-step/vtube_v2.9.18_minimum_diameter_warning.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 96: VTube-STEP and VTube-LASER New Radius Features ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See the new radius features in this video. In Part Setup:<br />
* Renamed "Radius 1" (renamed from Default Radius)<br />
* New "Radius 2" field<br />
* New "Radius 3" field<br />
<br><br />
In Parametric Tube grid windows:<br><br />
* See how to quickly set the radii for all bends using the synchronize radius feature.<br />
<br />
</td><br />
<td width=200><br />
[[image:vtube_v2.9.18.video_newradius_features.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/317137310 Vimeo]<br />
* View [https://youtu.be/DN_bhnMWCPI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.18_new_syncradlevels.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.17===<br />
<br />
====Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer ====<br />
<br />
Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.18.video_RbSABendPro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/315983373 Vimeo]<br />
* View [https://youtu.be/RLCXQt34Alw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_bendpro_communications.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_hexagon_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309191006 Vimeo]<br />
* View [https://youtu.be/kRwrjV9AqZA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_hexagon_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 93: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the FARO QUANTUM SCANARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_faro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309031852 Vimeo]<br />
* View [https://youtu.be/mt3Wn30EQIs YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_faro_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 92: Measuring part "VTube-LASER Demo 5" with MicroScribe in Version 2.9.17 ====<br />
<br />
This video shows how to measure demo part 5 with version 2.9.17 of VTube-LASER. (Released in December 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_microscribe_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/308642989 Vimeo]<br />
* View [https://youtu.be/_aZg3KpVDis YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.17_microscribe_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 91: How To Reverse-Engineer to STEP file with a FARO ScanArm Using VTube-LASER ====<br />
<br />
This video shows how to reverse-engineer a tube to STEP file. Michael Cone is using VTube-LASER 2.9.17 and a FARO Quantum S ScanArm.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_reverse_faro.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/301420583 Vimeo]<br />
* View [https://youtu.be/N9CcloLF-jQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_reverse-engineer-to-STEP.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.16===<br />
<br />
====Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER ====<br />
<br />
This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.16._attach_and_use_RA8_scanner.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/298226309 Vimeo]<br />
* View [https://youtu.be/GQnAAGLJ-Sc YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.16_ROMER8_HowToAttachAndUseScanner.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.14===<br />
<br />
<br />
====Video 89: MEASURING SMALL TUBES with MICROSCRIBE ====<br />
<br />
<table width=600><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to measure small tubes with the MicroScribe i arm using VTube-LASER.</td><br />
<td width=200><br />
[[image:VTL MicroScribe Video 4.png|300px]]<br><br />
</td><br />
<td width=200><br />
* View on [https://vimeo.com/288409692 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.14_microscribe_dual_split_bend_0.1875.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br />
<br />
===Version 2.9.12===<br />
<br />
====Video 88: VTube-LASER and VTube-STEP Unlimited NOTE LIST Feature ====<br />
<br />
This video shows the new unlimited NOTE LIST feature that allows you to add any number of notes to a VTube project.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.12_notelist_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/285420883 Vimeo]<br />
* View [https://youtu.be/N5kGhWQjFHA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.12_noteslist_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.11===<br />
<br />
====Video 87: VTube-LASER's IMPROVED SQUARE TUBE SCANNING (FARO) ====<br />
<br />
This video shows the improved square-tube scanning feature in version 2.9.11 using a FARO ScanArm.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.11_squaretubescanningfaro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/279182056 Vimeo]<br />
* View [https://youtu.be/0viGl_CnzlM YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.11_scanning_square_tube_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.10===<br />
<br />
====Video 86: VTube-LASER's LASER SCAN FILTER SOUND ====<br />
<br />
This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.10._laserscanfilter_sound.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/278343562 Vimeo]<br />
* View [https://youtu.be/lAmLVzMHatw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_romer_laserscanfilter_sound.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 85: Using VTube-LASER to Supply SOLIDWORKS with Data for Parametric Overlay ====<br />
<br />
This video shows a workflow that allows you to reverse-engineer a Y-pipe sample into SOLIDWORKS. The workflow uses a parametrically-controlled template file in SOLIDWORKS that was created to overlay the scanned-in data for an approximate match. This is an advanced topic for SOLIDWORKS users that concentrates mainly on how it is possible to handle parametric control inside SOLIDWORKS with the help of VTube-LASER scanning.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_reverse-engineering_Y_pipe_parametric_overlay_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER.v2.9.10_ReverseEngineeringToAParametricPart.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 84: Measuring Convoluted Tube and Wire with VTube-LASER ====<br />
<br />
This video shows VTube-LASER's ability to measure extremely convoluted parts. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_convoluted_tube_and_wire_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/277725088 Vimeo]<br />
* View on [https://youtu.be/ZkZm3bFHzog YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_convoluted_tube_wire_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.9===<br />
<br />
<br />
====Video 83: How to Use VTube-STEP and VTube-LASER to Setup and Correct a UNISON Bender ====<br />
<br />
This video shows how to use VTube to setup and correct a Unison bender from model through finished part.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vvtl_2.9.9_setup and correct a unison bender video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/276530203 Vimeo]<br />
* View on [https://youtu.be/4cDtx3Zgzwk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.9_correcting_unison_benders.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.8===<br />
<br />
<br />
====Video 82: Using MTA x 3 To Measure Highly Deformed Exhaust Pipes ====<br />
<br />
This video shows using a three-measure MTA (Measured Tube Average) feature to reduce the deviations due to deformation by 50% in a highly deformed exhaust pipe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.8_mta3_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/271371983 Vimeo]<br />
* View on [https://youtu.be/CWAWzvPRISI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.8_mta3_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 81: SOCO Bender Correction ====<br />
<br />
This video was taken at the TFS open house in Elkhart, Indiana in May, 2018. It shows an actual bender correction and its result after one correction.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.8_sococorrection.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/269557993 Vimeo]<br />
* View on [https://youtu.be/c_txfQvZuX4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_2.9.8_SOCO_Corrections_Loop.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
<br />
<br />
====Video 80: TRAX Rail Arm Extender ====<br />
<br />
This video shows a quick intro to the TRAX Rail system that extend the reach of a measuring center either 1800mm or 3500mm depending on the model.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-TRAX_Video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/268826288 Vimeo]<br />
* View on [https://youtu.be/DVn_2V5PnXo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/AdvancedTubularTrax_VTube-LASER_1800_ROMER.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.7===<br />
<br />
====Video 79: EXPORT REPORTS to EXTERNAL NETWORK LOCATIONS ====<br />
<br />
This video demonstrates how to export a report to an external network location.<br><br><br />
This allows anyone with access to the network path to view VTube-LASER reports in a web browser.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-V2.9.7_ExportHTMLReportToPath.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.7_exportreports.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.4===<br />
<br />
====Video 78: VTube-LASER Corrects an SMT Bender ====<br />
<br />
This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.4_smtcorrection_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/256176430 Vimeo]<br />
* View on [https://youtu.be/YUwPGsUeiP4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl%20smtvideo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.3===<br />
<br />
====Video 77: Build Entire Assemblies to SOLIDWORKS ====<br />
<br />
This video demonstrates how this version of VTube-LASER can build entire assemblies to SOLIDWORKS for you in less than a minute with the press of a couple of buttons.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_swassembly_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/253353260 Vimeo]<br />
* View on [https://youtu.be/SdGz11P5uGQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_sw_assemblies.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 76: Use the Measured Tube Averaging (MTA) Feature for Super Accurate Measurements ====<br />
<br />
This video demonstrates how the MTA feature can measure both sides of the same tube to create a measured tube average for more reliable tube shape calculation.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' ROMER Absolute Arm 7325SI<br><br><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252767821 Vimeo]<br />
* View on [https://youtu.be/cJ8ts3QflKo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' FARO Quantum S ScanArm<br><br></td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252786153 Vimeo]<br />
* View on [https://youtu.be/w9IgI0G-gUo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Other Pages===<br />
<br />
* See [[Retired VTube-LASER Videos]]<br />
* Back to [[VTube-LASER]]</div>Mconehttp://www.advancedtubular.wiki/index.php/VTube-LASER_VideosVTube-LASER Videos2023-02-24T18:55:57Z<p>Mcone: /* Video 20230224: Important Tips for End-Straight/End Scanning */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=300><br />
<br />
See a complete list of VTube-LASER videos on this page.<br><br><br />
<br />
* Back to [http://www.advancedtubular.com/vtube-laser.htm the Main VTube-LASER] web page<br><br><br />
* Back to [[VTube-LASER]] Knowledgebase Page<br><br><br />
* Note: VTube-STEP is included with every VTube-LASER installation. You can watch '''VTube-STEP videos''' in the [[VTube-STEP Videos]] page.<br><br><br />
* See [[Retired VTube-LASER Videos]]<br />
</td><br />
<td width=300><br />
[[image:vtube-laser_videos.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
__NOTOC__<br />
<br />
==Video Subpages Related to Specific Arms==<br />
Click on the images to enter the video subpages with videos for specific arms.<br><br><br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTube-LASER_Videos_HEXAGON_ROMER.png|200px|link=VTube-LASER Videos for HEXAGON ROMER]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:vtube-laser_video_FARO.png|200px|link=VTube-LASER Videos for FARO|]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos Kreon.png|200px|link=VTube-LASER Videos for Kreon]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos MicroScribe.png|200px|link=VTube-LASER Videos for MicroScribe]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
<br><br><br><br><br />
<br />
==Latest Videos==<br />
<br />
===Version 4===<br />
<br />
<br />
====Video 20230224: Important Tips for End-Straight/End Scanning ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone, the lead developer for VTube-LASER shows how to get reliable end point locations from proper end straight scanning techniques.<br />
<td width=200><br />
[[image:vtl_v4_TipsForEndStraightScanning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230224_ImportantTipsForEndStraightScanning.mp4 MP4]<br />
* View video [https://vimeo.com/802070332 Vimeo]<br />
* View video [https://youtu.be/k-Qkm8OJEfk YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230206: How to learn, test, and use the DCP (Diameter Cut Plane) to measure tube straights that are near other objects ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to learn, test, and use the DCP feature to measure tubes that run near other objects.<br />
<td width=200><br />
[[image:vtl_v4_DCPTutorial.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230206_DiameterCutPlaneTutorial.mp4 MP4]<br />
* View video [https://vimeo.com/796424925 Vimeo]<br />
* View video [https://youtu.be/CLcExwN-pTA YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230112: How to Export to Microsoft Excel from VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the different ways to export from VTube-STEP and VTube-LASER to Microsoft Excel.<br />
<td width=200><br />
[[image:vtl_v4_MicrosoftExcelVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230112_ExportingToExcel_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/789311957 Vimeo]<br />
* View video [https://youtu.be/noSSut2RMYg YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230106: Easy Fine-tuning for Bender Corrections with Correction Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to quickly reduce bender adjustments using Correction Percentage.<br />
<td width=200><br />
[[image:vtl_v4_CorrectionPercentageVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230106_VTube-LASER_v4_CorrectionPercentage.mp4 MP4]<br />
* View video [https://vimeo.com/787736630 Vimeo]<br />
* View video [https://youtu.be/deLKsd3LDU4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20221006: GD&T Perpendicularity Tutorial for End Trim Profile Measure Process====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the End Trim Profile measure process to calculate GD&T perpendicularity.<br />
<td width=200><br />
[[image:vtl_v4_EndTrimProfileMeasureVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20221005_EndTrimProfile_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/757282746 Vimeo]<br />
* View video [https://youtu.be/kQKgeSerbz8 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220927: Measuring a Can-Am Maverick Radius Rod with VTube-LASER Space Objects====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Calvin Nichoson (VTube-LASER Technician) measuring a Can-Am Maverick radius rod with VTube-LASER version 4 Space Objects.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_Can-Am.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220926_VTL_Can-AmMaverickX3LowerRadiusRod_Measure.mp4 MP4]<br />
* View video [https://vimeo.com/754344224 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220912: Sneak Peek Preview - Space Objects Feature in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Space Object feature coming in version 4 of VTube-LASER.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_v2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220912_SneakPeekPreviewSpaceObjects.mp4 MP4]<br />
* View video [https://vimeo.com/749197784 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220908: Sneak Peek Preview - Shallow Bend Logic in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Shallow Bend logic coming in version 4 of VTube-LASER which increases bend point location placement by up to 10 times.<br />
<td width=200><br />
[[image:vtl_v4_ShallowBendVideo_v2c.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220906_VTube-LASER_v4_ShallowBendMeasureLogic.mp4 MP4]<br />
* View Video [https://vimeo.com/747812907 Vimeo]<br />
* View Video [https://youtu.be/ZosWxq4A4NU YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.2===<br />
<br />
====Video 20220823: Automatic Global Configuration Backup File Location====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube making automatic backups of the Global Configuration file.<br />
<br><br><br />
The backup files ensure that you never lose the configuration of the global configuration file. If the configuration is lost, then it can be easily recovered with these files.<br />
<td width=200><br />
[[image:vtl_videoimage_backupglobalconfig.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220823_VTube_Global_Config_Backup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220819: Overview of VTube-LASER to COMCO Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows an overview of communications to the COMCO benders using VTube-LASER<br />
<td width=200><br />
[[image:vtl_videoimage_comcooverview.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220819_COMCO_Bender_Corrections_In_VTube-LASER.mp4 MP4]<br />
* See PDF [https://www.advancedtubular.com/vtube-laser/20210817-How_To_Export_CSV_from_COMCO.pdf How to Export CSV from COMCO] <br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220629: How Set Up to Correct SMI Benders with VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows set up VTube-LASER to correct SMI benders.<br />
<td width=200><br />
[[image:vtl_v3.2_SMIBenderCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220629_VTube-LASER_SMI_Corrections.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220603: How To Measure Square and Rectangular Tubing with VTube-LASER and a FARO ScanArm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how use a FARO Quantum ScanArm to measure square or rectangular tubing.<br />
<td width=200><br />
[[image:vtl_v3.2_FaroSquareTubingVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220603_vtl3.2_SquareTube_FARO.mp4 MP4]<br />
* View [https://vimeo.com/716899246 Vimeo] <br />
* View [https://youtu.be/rhohh9X3bU0 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220513: How To Measure Square Tube with VTube-LASER Using a HEXAGON Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models, measure them, correct tube benders to adjust the shape, and then qualify square tube shapes using VTube-LASER Corner Profile measure process.<br />
<td width=200><br />
[[image:vtl_v3.2b755_SquareTubeVideo_Hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220513_VTube-LASER_MeasureSquare_HEXAGON_ScanArm.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br><br />
<br />
====Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.<br />
<td width=200><br />
[[image:vtl_v3.2b750_CNCBenderBenderlinkVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220421_VTube-LASER_to_CNC_Bender_Communications_Setup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220420: Measuring 180-degree Bends with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure 180-degree bends with the Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b750_Kreon180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220420_vtl_Kreon_180-Degree_Bends_rev2.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220413: Square Tube Measuring with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows square tube measuring using a Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b744_KreonSquareTube.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220413_vtl_v3.2_kreon_square_tube.mp4 MP4]<br />
* View [https://vimeo.com/699270748 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220331: Improved Best Fit For Shallow Bends====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how this version of VTube-LASER has an improved Best Fit algorithm designed to handle tubes with shallow bends.<br />
<td width=200><br />
[[image:vtl_v3.2b714_BestFitShallowBend.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220331_v3.2_b714_BestFitShallowBendLogic.mp4 MP4]<br />
* View [https://vimeo.com/694643426 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.1===<br />
====Video 20220221-C: Aligning the Kreon Scanner in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to align the Kreon scanner to the Kreon arm in VTube-LASER before you start using the Kreon arm the first time.<br />
<br />
<td width=200><br />
[[image:kreon_video3.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_scanner_positioning_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220221-B: Controlling the Kreon Video Settings Properly ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter and control the values in the Kreon Video Settings window.<br />
<br />
<td width=200><br />
[[image:kreon_video4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_video_setup_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220221: Verifying VTube-LASER and Kreon with a Test Cylinder====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and use a test cylinder to verify your measuring system at the beginning of each day.<br />
<br />
<td width=200><br />
[[image:kreon_video2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_test_cylinder_setup.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
====Video 20220216: VTube-LASER Using a Kreon Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the connection to a Kreon ACES scan arm with a Solano blue line scanner.<br />
<br />
<td width=200><br />
[[image:kreon_video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v3.1_kreon_intro.mp4 MP4]<br />
* View [https://vimeo.com/678223398 Vimeo]<br />
* View [https://youtu.be/6o7W38-q1lU YouTube]<br />
<br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to calculate tube elongation percentage with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20220113_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_training%20video%2015%20-%20How%20to%20Calculate%20the%20Tube%20Elongation%20Percentage.mp4 MP4]<br />
* View [https://vimeo.com/665826780 Vimeo]<br />
* View [https://youtu.be/a0bc6IpbWb0 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20211207: VTube-LASER Correction for Han Jie Benders====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638)<br />
<br />
<td width=200><br />
[[image:20211207_VTube-LASER_to_HanJie_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER_HanJie_Promotional.mp4 MP4]<br />
* View [https://vimeo.com/654364120 Vimeo]<br />
* View [https://youtu.be/ym8LbFUpyow YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===Version 3.0===<br />
<br />
====Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)<br />
<br />
<td width=200><br />
[[image:20210702_TangentPointEntryGrid.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_b555_tangent_point_entry_grid.mp4 MP4]<br />
* View [https://vimeo.com/571874446 Vimeo]<br />
* View [https://youtu.be/C9yLbhoWlSE YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021)<br />
<br />
<td width=200><br />
[[image:20210622_End_Scan_Flier_Filter_Promo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_endscanflierfilter_promo.mp4 MP4]<br />
* View [https://vimeo.com/567104555 Vimeo]<br />
* View [https://youtu.be/RfWxFa6fEFk YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210505: How To Determine Positive and Negative Rotation Directions====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube.<br />
<br />
<td width=200><br />
[[image:20210505_Positive_Rotation_Direction.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_positive_rotation_direction.mp4 MP4]<br />
* View [https://vimeo.com/545519786 Vimeo]<br />
* View [https://youtu.be/CL7L-rZbVDQ YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210503: Automatic Reverse Calc====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513.<br />
<br />
<td width=200><br />
[[image:20210503_AutomaticReverseCalcVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vt_v3_b513_automatic_reverse_calc.mp4 MP4]<br />
* View [https://vimeo.com/545518519 Vimeo]<br />
* View [https://youtu.be/-rh5eNA8tIA YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210421: Why and How to Use MTA (Measured Tube Averaging)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows the why and how of MTA.<br />
<br />
<td width=200><br />
[[image:20210421_MTAVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_mta_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/541156704 Vimeo]<br />
* View [https://youtu.be/gGSAR-a6m3Q YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100413: VTube v3 NPS Values Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how to use the new NPS values in VTube.<br />
<br />
<td width=200><br />
[[image:20210413_NPSVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_nps_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/536497747 Vimeo]<br />
* View [https://youtu.be/RcKawANCpWY YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100406: VTube-LASER Reverse Engineering Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210406_ReverseEngineeringVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_reverse_engineering_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/533692712 Vimeo]<br />
* View [https://youtu.be/7N_-0d_Mjp4 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210330: VTube-LASER to Transfluid Bender Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to communicate with Transfluid tProject bender software.<br />
<br />
<td width=200><br />
[[image:20210330_TransfluidTProjectCommunications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_transfluid_tproject_communications.mp4 MP4]<br />
* View [https://vimeo.com/531073455 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210313: How to Enter Bender Data of Different Types in the Same Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data.<br />
<br />
<td width=200><br />
[[image:20210313_ImportMixedBenderData.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_entering_mixed_bender_data_types.mp4 MP4]<br />
* View [https://vimeo.com/523279713 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210310: How to Import New Report Templates====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import new report templates into VTube-STEP and VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210310_ImportReportTemplates.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_importingreporttemplates.mp4 MP4]<br />
* View [https://vimeo.com/522027683 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210212: Switch the FARO Scanner ON and OFF Manually====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Use this process to quickly switch the FARO scanner on or off manually.<br />
<br />
<td width=200><br />
[[image:20210212_FARO_Scanner_ONOFF.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_20210212_FARO_Scanner_Laser_On_Off.mp4 MP4]<br />
* View [https://vimeo.com/511726559 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes.<br />
<br />
<td width=200><br />
[[image:20201221_UTESelectCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_UTE_Select_Corrections_Hexagon.mp4 MP4]<br />
* View [https://vimeo.com/493550553 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201117: Calculate Centerline Radii Using Measure Bend Profile (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Quickly and accurately measure the centerline radius using the Measure Bend Profile process.<br />
<br />
<td width=200><br />
[[image:20201117_measurebendprofile_bendradii.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_bend_profile_scan_for_radius_faro.mp4 MP4]<br />
* View [https://vimeo.com/480569055 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights.<br />
<br />
<td width=200><br />
[[image:20201111B_autocopydefaulttolerance.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_automatic_copy_of_default_tolerance.mp4 MP4]<br />
* View [https://vimeo.com/478271550 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges.<br />
<br />
<td width=200><br />
[[image:20201111_precisionweightcontrolalignment.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_precision_weight_control_alignment.mp4 MP4]<br />
* View [https://vimeo.com/478127038 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm.<br />
<br />
<td width=200><br />
[[image:20200930_measuring_od_end_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_qualifying_endscan_profiles_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/463607514 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports_hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/461988796 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200923: How to Measure and Qualify Ports on a Tube Using Assembly (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_faro.mp4 MP4]<br />
* View [https://vimeo.com/461239022 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200804: Measuring a Brake Line with a FARO EDGE Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER measuring a brake line with a legacy FARO Edge Scan Arm.<br />
<br />
<td width=200><br />
[[image:2020804_Brake_Line_FAROEdge.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_faro_edge_brake_line.mp4 MP4]<br />
* View [https://vimeo.com/444720352 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner.<br />
<br />
<td width=200><br />
[[image:20200722_RA7520_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/440788274 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_ra-7520_SI_ScanningTube.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200709: Real-time Overall Scan Scores Build Confidence (HEXAGON RA8)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how VTube-LASER scan scoring system helps users know they are measuring well.<br />
<br />
<td width=200><br />
[[image:20200709_scanscore_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_realtime_scanscore.mp4 MP4]<br />
* View [https://vimeo.com/437000592 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200609: How to Use Multiple Versions of the Same Part in One Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to create multiple versions of the same part in one project. Each version can then be used to measure the part at various stages of the fabrication process.<br />
<br />
<td width=200><br />
[[image:20200609_multiple_versions_parts_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_multiple_versions_of_same_part.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
====Video 20200515: How Import 180-degree Bend Models====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models with 180-degree bends.<br />
<br />
<td width=200><br />
[[image:20200515_import180_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_import_180-degree_bend_models.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 20200514: How to Change Languages in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to change languages in the VTube-LASER and VTube-STEP user interface.<br />
<br />
<td width=200><br />
[[image:20200514_changelanguges_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_change_languages.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200406: Measure Corner Profile with VTube-LASER and FARO Quantum====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure a corner profile shape with the Corner Profile measure process using a FARO Quantum arm.<br />
<br />
<td width=200><br />
[[image:20200406_cornerprofile_faro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/404834117 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/404834117/b97d3500e3 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200406_vtl3_cornerprofile_faro_quantum.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar.<br />
<br />
<td width=200><br />
[[image:20200331_training_hexagon_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402756704 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402756704/45b8f394d8 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl3_verify_hexagon_with_cyl_length_bar.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200327: VTube UNIVERSITY Training Video: Introduction to Import and Measuring Tube Shape Demo Tube 5 with a FARO Arm====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to accompany training document 20200327..002" [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:20200327_trainingdoc002_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402035686 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402035686/bdbb6da5fe Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_Intro_To_Import_And_Measure_VTube-LASER_with_FARO_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200323: VTube UNIVERSITY Training Video: FARO Account Manager Demo Training====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to demonstrate VTube-LASER using a FARO ScanArm.<br><br><br />
This video is a supplement to the demo training document available on [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:vtl_v3.0_training_faro_demonstration.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399899513 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/399899513/aa54eece37 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_demonstrating_vtube-laser_with_faro_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200320: VTube UNIVERSITY Training Video: End Scans====<br />
(HEXAGON RA8-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_training_endscan_technique.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399358340 Vimeo]<br />
* View [https://youtu.be/qb9G15eQGpk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200320_VTubeUniversity_vtl_v3_endscan_technique_rev2.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200306: VTube-LASER Correction of an OMCG Wire Bender====<br />
(HEXAGON RA7-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a corrections loop between VTube-LASER and an OMCG wire bender.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_correct_OMCG.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://youtu.be/xFtyRToRwFY YouTube]<br />
* View [https://vimeo.com/396590418 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200306_VTube-LASER_to_OMCG_Corrections_at_Ohio_Precision_Products.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
You can manually setup the Ethernet port following the steps in this short video.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_setupethnernetHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20200225_vtl_v3_Windows10_Ethernet_Setup_For_HEXAGON_RDS.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Switching from probe to laser is easy with the three-way toggle button.<br />
<br />
(Using a HEXAGON RA8 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_switchingprobesHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389798661 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200206_vtl_v3.0_how%20to%20switch%20from%20ball%20to%20laser%20in%20HEXAGON%20RS8%20Arms.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.21===<br />
<br />
====Video 20200204: How to Measure a Bend Radius with Bend Profile Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Bend Profile measure process to measure a bend radius.<br />
<br />
(Using a FARO Quantum ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.21_bendprofilescan_faroquantum.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389291065 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_bendprofilescan_faroquantum.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE. <br />
<br />
(Using a HEXAGON 8325 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles_002.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/384896663 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.21_cornerprofile_demo_2.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 110: Corner Profile Measure Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER can easily measure corner profiles.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/360026684 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 107: Corrections Loop with SOCO Beckhoff Controls====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_soco_beckhoff_communications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/356003359 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_SOCO_SV-M_Protocol.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.20===<br />
<br />
====Video 105: Measuring a Part with 180-Degree Bends====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows VTube-LASER scanning through a part with two 180-degree bends.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.20.video_hvac_dual180.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/345144160 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.20_hvac_dual_split_bend_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.19===<br />
<br />
====Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_different_tube_types_scanned.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332490313 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_quickscan_multiple_part_types.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_timer_accept_button.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332124282 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_accepttimer.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 102: VTube-LASER is Now Compatible with Baces USB Arms====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER working with a Baces USB arm. <br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_baces_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/329690049 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_BacesArmDemo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.18===<br />
<br />
====Video 101: How Automatic Laser Separation for UniScan Makes Scanning Tubes Easier (HEXAGON Arm)====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the Automatic Laser Separation feature introduced in version 2.9.18 on March 15, 2018.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_automatic_laser_separation_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/324467076 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.18_automatic_laser_separation_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_calculate_true_radius_180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.18_measure_180_degree_bend_radius.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_reverse_RZR_side_by_side.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320630910 Vimeo]<br />
* View [https://youtu.be/Qpn8Iyl_RwU YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_reverse_rzr_side_by_side.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 98: About the Small Diameter Warning ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how Small Diameter Warning works along with its setup.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_small_diameter_warning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320355578 Vimeo]<br />
* View [https://youtu.be/uT_PN-lNsz8 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-step/vtube_v2.9.18_minimum_diameter_warning.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 96: VTube-STEP and VTube-LASER New Radius Features ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See the new radius features in this video. In Part Setup:<br />
* Renamed "Radius 1" (renamed from Default Radius)<br />
* New "Radius 2" field<br />
* New "Radius 3" field<br />
<br><br />
In Parametric Tube grid windows:<br><br />
* See how to quickly set the radii for all bends using the synchronize radius feature.<br />
<br />
</td><br />
<td width=200><br />
[[image:vtube_v2.9.18.video_newradius_features.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/317137310 Vimeo]<br />
* View [https://youtu.be/DN_bhnMWCPI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.18_new_syncradlevels.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.17===<br />
<br />
====Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer ====<br />
<br />
Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.18.video_RbSABendPro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/315983373 Vimeo]<br />
* View [https://youtu.be/RLCXQt34Alw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_bendpro_communications.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_hexagon_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309191006 Vimeo]<br />
* View [https://youtu.be/kRwrjV9AqZA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_hexagon_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 93: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the FARO QUANTUM SCANARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_faro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309031852 Vimeo]<br />
* View [https://youtu.be/mt3Wn30EQIs YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_faro_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 92: Measuring part "VTube-LASER Demo 5" with MicroScribe in Version 2.9.17 ====<br />
<br />
This video shows how to measure demo part 5 with version 2.9.17 of VTube-LASER. (Released in December 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_microscribe_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/308642989 Vimeo]<br />
* View [https://youtu.be/_aZg3KpVDis YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.17_microscribe_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 91: How To Reverse-Engineer to STEP file with a FARO ScanArm Using VTube-LASER ====<br />
<br />
This video shows how to reverse-engineer a tube to STEP file. Michael Cone is using VTube-LASER 2.9.17 and a FARO Quantum S ScanArm.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_reverse_faro.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/301420583 Vimeo]<br />
* View [https://youtu.be/N9CcloLF-jQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_reverse-engineer-to-STEP.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.16===<br />
<br />
====Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER ====<br />
<br />
This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.16._attach_and_use_RA8_scanner.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/298226309 Vimeo]<br />
* View [https://youtu.be/GQnAAGLJ-Sc YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.16_ROMER8_HowToAttachAndUseScanner.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.14===<br />
<br />
<br />
====Video 89: MEASURING SMALL TUBES with MICROSCRIBE ====<br />
<br />
<table width=600><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to measure small tubes with the MicroScribe i arm using VTube-LASER.</td><br />
<td width=200><br />
[[image:VTL MicroScribe Video 4.png|300px]]<br><br />
</td><br />
<td width=200><br />
* View on [https://vimeo.com/288409692 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.14_microscribe_dual_split_bend_0.1875.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br />
<br />
===Version 2.9.12===<br />
<br />
====Video 88: VTube-LASER and VTube-STEP Unlimited NOTE LIST Feature ====<br />
<br />
This video shows the new unlimited NOTE LIST feature that allows you to add any number of notes to a VTube project.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.12_notelist_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/285420883 Vimeo]<br />
* View [https://youtu.be/N5kGhWQjFHA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.12_noteslist_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.11===<br />
<br />
====Video 87: VTube-LASER's IMPROVED SQUARE TUBE SCANNING (FARO) ====<br />
<br />
This video shows the improved square-tube scanning feature in version 2.9.11 using a FARO ScanArm.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.11_squaretubescanningfaro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/279182056 Vimeo]<br />
* View [https://youtu.be/0viGl_CnzlM YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.11_scanning_square_tube_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.10===<br />
<br />
====Video 86: VTube-LASER's LASER SCAN FILTER SOUND ====<br />
<br />
This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.10._laserscanfilter_sound.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/278343562 Vimeo]<br />
* View [https://youtu.be/lAmLVzMHatw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_romer_laserscanfilter_sound.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 85: Using VTube-LASER to Supply SOLIDWORKS with Data for Parametric Overlay ====<br />
<br />
This video shows a workflow that allows you to reverse-engineer a Y-pipe sample into SOLIDWORKS. The workflow uses a parametrically-controlled template file in SOLIDWORKS that was created to overlay the scanned-in data for an approximate match. This is an advanced topic for SOLIDWORKS users that concentrates mainly on how it is possible to handle parametric control inside SOLIDWORKS with the help of VTube-LASER scanning.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_reverse-engineering_Y_pipe_parametric_overlay_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER.v2.9.10_ReverseEngineeringToAParametricPart.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 84: Measuring Convoluted Tube and Wire with VTube-LASER ====<br />
<br />
This video shows VTube-LASER's ability to measure extremely convoluted parts. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_convoluted_tube_and_wire_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/277725088 Vimeo]<br />
* View on [https://youtu.be/ZkZm3bFHzog YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_convoluted_tube_wire_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.9===<br />
<br />
<br />
====Video 83: How to Use VTube-STEP and VTube-LASER to Setup and Correct a UNISON Bender ====<br />
<br />
This video shows how to use VTube to setup and correct a Unison bender from model through finished part.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vvtl_2.9.9_setup and correct a unison bender video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/276530203 Vimeo]<br />
* View on [https://youtu.be/4cDtx3Zgzwk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.9_correcting_unison_benders.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.8===<br />
<br />
<br />
====Video 82: Using MTA x 3 To Measure Highly Deformed Exhaust Pipes ====<br />
<br />
This video shows using a three-measure MTA (Measured Tube Average) feature to reduce the deviations due to deformation by 50% in a highly deformed exhaust pipe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.8_mta3_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/271371983 Vimeo]<br />
* View on [https://youtu.be/CWAWzvPRISI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.8_mta3_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 81: SOCO Bender Correction ====<br />
<br />
This video was taken at the TFS open house in Elkhart, Indiana in May, 2018. It shows an actual bender correction and its result after one correction.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.8_sococorrection.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/269557993 Vimeo]<br />
* View on [https://youtu.be/c_txfQvZuX4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_2.9.8_SOCO_Corrections_Loop.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
<br />
<br />
====Video 80: TRAX Rail Arm Extender ====<br />
<br />
This video shows a quick intro to the TRAX Rail system that extend the reach of a measuring center either 1800mm or 3500mm depending on the model.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-TRAX_Video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/268826288 Vimeo]<br />
* View on [https://youtu.be/DVn_2V5PnXo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/AdvancedTubularTrax_VTube-LASER_1800_ROMER.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.7===<br />
<br />
====Video 79: EXPORT REPORTS to EXTERNAL NETWORK LOCATIONS ====<br />
<br />
This video demonstrates how to export a report to an external network location.<br><br><br />
This allows anyone with access to the network path to view VTube-LASER reports in a web browser.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-V2.9.7_ExportHTMLReportToPath.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.7_exportreports.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.4===<br />
<br />
====Video 78: VTube-LASER Corrects an SMT Bender ====<br />
<br />
This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.4_smtcorrection_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/256176430 Vimeo]<br />
* View on [https://youtu.be/YUwPGsUeiP4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl%20smtvideo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.3===<br />
<br />
====Video 77: Build Entire Assemblies to SOLIDWORKS ====<br />
<br />
This video demonstrates how this version of VTube-LASER can build entire assemblies to SOLIDWORKS for you in less than a minute with the press of a couple of buttons.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_swassembly_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/253353260 Vimeo]<br />
* View on [https://youtu.be/SdGz11P5uGQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_sw_assemblies.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 76: Use the Measured Tube Averaging (MTA) Feature for Super Accurate Measurements ====<br />
<br />
This video demonstrates how the MTA feature can measure both sides of the same tube to create a measured tube average for more reliable tube shape calculation.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' ROMER Absolute Arm 7325SI<br><br><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252767821 Vimeo]<br />
* View on [https://youtu.be/cJ8ts3QflKo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' FARO Quantum S ScanArm<br><br></td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252786153 Vimeo]<br />
* View on [https://youtu.be/w9IgI0G-gUo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Other Pages===<br />
<br />
* See [[Retired VTube-LASER Videos]]<br />
* Back to [[VTube-LASER]]</div>Mconehttp://www.advancedtubular.wiki/index.php/VTube-LASER_VideosVTube-LASER Videos2023-02-24T18:50:41Z<p>Mcone: /* Version 4 */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=300><br />
<br />
See a complete list of VTube-LASER videos on this page.<br><br><br />
<br />
* Back to [http://www.advancedtubular.com/vtube-laser.htm the Main VTube-LASER] web page<br><br><br />
* Back to [[VTube-LASER]] Knowledgebase Page<br><br><br />
* Note: VTube-STEP is included with every VTube-LASER installation. You can watch '''VTube-STEP videos''' in the [[VTube-STEP Videos]] page.<br><br><br />
* See [[Retired VTube-LASER Videos]]<br />
</td><br />
<td width=300><br />
[[image:vtube-laser_videos.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
__NOTOC__<br />
<br />
==Video Subpages Related to Specific Arms==<br />
Click on the images to enter the video subpages with videos for specific arms.<br><br><br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTube-LASER_Videos_HEXAGON_ROMER.png|200px|link=VTube-LASER Videos for HEXAGON ROMER]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:vtube-laser_video_FARO.png|200px|link=VTube-LASER Videos for FARO|]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos Kreon.png|200px|link=VTube-LASER Videos for Kreon]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos MicroScribe.png|200px|link=VTube-LASER Videos for MicroScribe]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
<br><br><br><br><br />
<br />
==Latest Videos==<br />
<br />
===Version 4===<br />
<br />
<br />
====Video 20230224: Important Tips for End-Straight/End Scanning ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone, the lead developer for VTube-LASER shows how to get reliable end point locations from proper end straight scanning techniques.<br />
<td width=200><br />
[[image:vtl_v4_TipsForEndStraightScanning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230224_ImportantTipsForEndStraightScanning.mp4 MP4]<br />
* View video [https://vimeo.com/802070332 Vimeo]<br />
* View video [https://youtu.be/CLcExwN-pTA YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20230206: How to learn, test, and use the DCP (Diameter Cut Plane) to measure tube straights that are near other objects ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to learn, test, and use the DCP feature to measure tubes that run near other objects.<br />
<td width=200><br />
[[image:vtl_v4_DCPTutorial.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230206_DiameterCutPlaneTutorial.mp4 MP4]<br />
* View video [https://vimeo.com/796424925 Vimeo]<br />
* View video [https://youtu.be/CLcExwN-pTA YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230112: How to Export to Microsoft Excel from VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the different ways to export from VTube-STEP and VTube-LASER to Microsoft Excel.<br />
<td width=200><br />
[[image:vtl_v4_MicrosoftExcelVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230112_ExportingToExcel_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/789311957 Vimeo]<br />
* View video [https://youtu.be/noSSut2RMYg YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230106: Easy Fine-tuning for Bender Corrections with Correction Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to quickly reduce bender adjustments using Correction Percentage.<br />
<td width=200><br />
[[image:vtl_v4_CorrectionPercentageVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230106_VTube-LASER_v4_CorrectionPercentage.mp4 MP4]<br />
* View video [https://vimeo.com/787736630 Vimeo]<br />
* View video [https://youtu.be/deLKsd3LDU4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20221006: GD&T Perpendicularity Tutorial for End Trim Profile Measure Process====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the End Trim Profile measure process to calculate GD&T perpendicularity.<br />
<td width=200><br />
[[image:vtl_v4_EndTrimProfileMeasureVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20221005_EndTrimProfile_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/757282746 Vimeo]<br />
* View video [https://youtu.be/kQKgeSerbz8 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220927: Measuring a Can-Am Maverick Radius Rod with VTube-LASER Space Objects====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Calvin Nichoson (VTube-LASER Technician) measuring a Can-Am Maverick radius rod with VTube-LASER version 4 Space Objects.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_Can-Am.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220926_VTL_Can-AmMaverickX3LowerRadiusRod_Measure.mp4 MP4]<br />
* View video [https://vimeo.com/754344224 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220912: Sneak Peek Preview - Space Objects Feature in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Space Object feature coming in version 4 of VTube-LASER.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_v2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220912_SneakPeekPreviewSpaceObjects.mp4 MP4]<br />
* View video [https://vimeo.com/749197784 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220908: Sneak Peek Preview - Shallow Bend Logic in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Shallow Bend logic coming in version 4 of VTube-LASER which increases bend point location placement by up to 10 times.<br />
<td width=200><br />
[[image:vtl_v4_ShallowBendVideo_v2c.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220906_VTube-LASER_v4_ShallowBendMeasureLogic.mp4 MP4]<br />
* View Video [https://vimeo.com/747812907 Vimeo]<br />
* View Video [https://youtu.be/ZosWxq4A4NU YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.2===<br />
<br />
====Video 20220823: Automatic Global Configuration Backup File Location====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube making automatic backups of the Global Configuration file.<br />
<br><br><br />
The backup files ensure that you never lose the configuration of the global configuration file. If the configuration is lost, then it can be easily recovered with these files.<br />
<td width=200><br />
[[image:vtl_videoimage_backupglobalconfig.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220823_VTube_Global_Config_Backup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220819: Overview of VTube-LASER to COMCO Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows an overview of communications to the COMCO benders using VTube-LASER<br />
<td width=200><br />
[[image:vtl_videoimage_comcooverview.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220819_COMCO_Bender_Corrections_In_VTube-LASER.mp4 MP4]<br />
* See PDF [https://www.advancedtubular.com/vtube-laser/20210817-How_To_Export_CSV_from_COMCO.pdf How to Export CSV from COMCO] <br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220629: How Set Up to Correct SMI Benders with VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows set up VTube-LASER to correct SMI benders.<br />
<td width=200><br />
[[image:vtl_v3.2_SMIBenderCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220629_VTube-LASER_SMI_Corrections.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220603: How To Measure Square and Rectangular Tubing with VTube-LASER and a FARO ScanArm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how use a FARO Quantum ScanArm to measure square or rectangular tubing.<br />
<td width=200><br />
[[image:vtl_v3.2_FaroSquareTubingVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220603_vtl3.2_SquareTube_FARO.mp4 MP4]<br />
* View [https://vimeo.com/716899246 Vimeo] <br />
* View [https://youtu.be/rhohh9X3bU0 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220513: How To Measure Square Tube with VTube-LASER Using a HEXAGON Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models, measure them, correct tube benders to adjust the shape, and then qualify square tube shapes using VTube-LASER Corner Profile measure process.<br />
<td width=200><br />
[[image:vtl_v3.2b755_SquareTubeVideo_Hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220513_VTube-LASER_MeasureSquare_HEXAGON_ScanArm.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br><br />
<br />
====Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.<br />
<td width=200><br />
[[image:vtl_v3.2b750_CNCBenderBenderlinkVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220421_VTube-LASER_to_CNC_Bender_Communications_Setup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220420: Measuring 180-degree Bends with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure 180-degree bends with the Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b750_Kreon180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220420_vtl_Kreon_180-Degree_Bends_rev2.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220413: Square Tube Measuring with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows square tube measuring using a Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b744_KreonSquareTube.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220413_vtl_v3.2_kreon_square_tube.mp4 MP4]<br />
* View [https://vimeo.com/699270748 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220331: Improved Best Fit For Shallow Bends====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how this version of VTube-LASER has an improved Best Fit algorithm designed to handle tubes with shallow bends.<br />
<td width=200><br />
[[image:vtl_v3.2b714_BestFitShallowBend.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220331_v3.2_b714_BestFitShallowBendLogic.mp4 MP4]<br />
* View [https://vimeo.com/694643426 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.1===<br />
====Video 20220221-C: Aligning the Kreon Scanner in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to align the Kreon scanner to the Kreon arm in VTube-LASER before you start using the Kreon arm the first time.<br />
<br />
<td width=200><br />
[[image:kreon_video3.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_scanner_positioning_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220221-B: Controlling the Kreon Video Settings Properly ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter and control the values in the Kreon Video Settings window.<br />
<br />
<td width=200><br />
[[image:kreon_video4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_video_setup_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220221: Verifying VTube-LASER and Kreon with a Test Cylinder====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and use a test cylinder to verify your measuring system at the beginning of each day.<br />
<br />
<td width=200><br />
[[image:kreon_video2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_test_cylinder_setup.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
====Video 20220216: VTube-LASER Using a Kreon Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the connection to a Kreon ACES scan arm with a Solano blue line scanner.<br />
<br />
<td width=200><br />
[[image:kreon_video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v3.1_kreon_intro.mp4 MP4]<br />
* View [https://vimeo.com/678223398 Vimeo]<br />
* View [https://youtu.be/6o7W38-q1lU YouTube]<br />
<br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to calculate tube elongation percentage with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20220113_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_training%20video%2015%20-%20How%20to%20Calculate%20the%20Tube%20Elongation%20Percentage.mp4 MP4]<br />
* View [https://vimeo.com/665826780 Vimeo]<br />
* View [https://youtu.be/a0bc6IpbWb0 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20211207: VTube-LASER Correction for Han Jie Benders====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638)<br />
<br />
<td width=200><br />
[[image:20211207_VTube-LASER_to_HanJie_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER_HanJie_Promotional.mp4 MP4]<br />
* View [https://vimeo.com/654364120 Vimeo]<br />
* View [https://youtu.be/ym8LbFUpyow YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===Version 3.0===<br />
<br />
====Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)<br />
<br />
<td width=200><br />
[[image:20210702_TangentPointEntryGrid.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_b555_tangent_point_entry_grid.mp4 MP4]<br />
* View [https://vimeo.com/571874446 Vimeo]<br />
* View [https://youtu.be/C9yLbhoWlSE YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021)<br />
<br />
<td width=200><br />
[[image:20210622_End_Scan_Flier_Filter_Promo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_endscanflierfilter_promo.mp4 MP4]<br />
* View [https://vimeo.com/567104555 Vimeo]<br />
* View [https://youtu.be/RfWxFa6fEFk YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210505: How To Determine Positive and Negative Rotation Directions====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube.<br />
<br />
<td width=200><br />
[[image:20210505_Positive_Rotation_Direction.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_positive_rotation_direction.mp4 MP4]<br />
* View [https://vimeo.com/545519786 Vimeo]<br />
* View [https://youtu.be/CL7L-rZbVDQ YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210503: Automatic Reverse Calc====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513.<br />
<br />
<td width=200><br />
[[image:20210503_AutomaticReverseCalcVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vt_v3_b513_automatic_reverse_calc.mp4 MP4]<br />
* View [https://vimeo.com/545518519 Vimeo]<br />
* View [https://youtu.be/-rh5eNA8tIA YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210421: Why and How to Use MTA (Measured Tube Averaging)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows the why and how of MTA.<br />
<br />
<td width=200><br />
[[image:20210421_MTAVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_mta_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/541156704 Vimeo]<br />
* View [https://youtu.be/gGSAR-a6m3Q YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100413: VTube v3 NPS Values Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how to use the new NPS values in VTube.<br />
<br />
<td width=200><br />
[[image:20210413_NPSVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_nps_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/536497747 Vimeo]<br />
* View [https://youtu.be/RcKawANCpWY YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100406: VTube-LASER Reverse Engineering Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210406_ReverseEngineeringVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_reverse_engineering_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/533692712 Vimeo]<br />
* View [https://youtu.be/7N_-0d_Mjp4 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210330: VTube-LASER to Transfluid Bender Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to communicate with Transfluid tProject bender software.<br />
<br />
<td width=200><br />
[[image:20210330_TransfluidTProjectCommunications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_transfluid_tproject_communications.mp4 MP4]<br />
* View [https://vimeo.com/531073455 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210313: How to Enter Bender Data of Different Types in the Same Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data.<br />
<br />
<td width=200><br />
[[image:20210313_ImportMixedBenderData.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_entering_mixed_bender_data_types.mp4 MP4]<br />
* View [https://vimeo.com/523279713 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210310: How to Import New Report Templates====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import new report templates into VTube-STEP and VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210310_ImportReportTemplates.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_importingreporttemplates.mp4 MP4]<br />
* View [https://vimeo.com/522027683 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210212: Switch the FARO Scanner ON and OFF Manually====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Use this process to quickly switch the FARO scanner on or off manually.<br />
<br />
<td width=200><br />
[[image:20210212_FARO_Scanner_ONOFF.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_20210212_FARO_Scanner_Laser_On_Off.mp4 MP4]<br />
* View [https://vimeo.com/511726559 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes.<br />
<br />
<td width=200><br />
[[image:20201221_UTESelectCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_UTE_Select_Corrections_Hexagon.mp4 MP4]<br />
* View [https://vimeo.com/493550553 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201117: Calculate Centerline Radii Using Measure Bend Profile (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Quickly and accurately measure the centerline radius using the Measure Bend Profile process.<br />
<br />
<td width=200><br />
[[image:20201117_measurebendprofile_bendradii.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_bend_profile_scan_for_radius_faro.mp4 MP4]<br />
* View [https://vimeo.com/480569055 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights.<br />
<br />
<td width=200><br />
[[image:20201111B_autocopydefaulttolerance.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_automatic_copy_of_default_tolerance.mp4 MP4]<br />
* View [https://vimeo.com/478271550 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges.<br />
<br />
<td width=200><br />
[[image:20201111_precisionweightcontrolalignment.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_precision_weight_control_alignment.mp4 MP4]<br />
* View [https://vimeo.com/478127038 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm.<br />
<br />
<td width=200><br />
[[image:20200930_measuring_od_end_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_qualifying_endscan_profiles_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/463607514 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports_hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/461988796 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200923: How to Measure and Qualify Ports on a Tube Using Assembly (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_faro.mp4 MP4]<br />
* View [https://vimeo.com/461239022 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200804: Measuring a Brake Line with a FARO EDGE Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER measuring a brake line with a legacy FARO Edge Scan Arm.<br />
<br />
<td width=200><br />
[[image:2020804_Brake_Line_FAROEdge.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_faro_edge_brake_line.mp4 MP4]<br />
* View [https://vimeo.com/444720352 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner.<br />
<br />
<td width=200><br />
[[image:20200722_RA7520_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/440788274 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_ra-7520_SI_ScanningTube.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200709: Real-time Overall Scan Scores Build Confidence (HEXAGON RA8)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how VTube-LASER scan scoring system helps users know they are measuring well.<br />
<br />
<td width=200><br />
[[image:20200709_scanscore_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_realtime_scanscore.mp4 MP4]<br />
* View [https://vimeo.com/437000592 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200609: How to Use Multiple Versions of the Same Part in One Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to create multiple versions of the same part in one project. Each version can then be used to measure the part at various stages of the fabrication process.<br />
<br />
<td width=200><br />
[[image:20200609_multiple_versions_parts_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_multiple_versions_of_same_part.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
====Video 20200515: How Import 180-degree Bend Models====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models with 180-degree bends.<br />
<br />
<td width=200><br />
[[image:20200515_import180_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_import_180-degree_bend_models.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 20200514: How to Change Languages in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to change languages in the VTube-LASER and VTube-STEP user interface.<br />
<br />
<td width=200><br />
[[image:20200514_changelanguges_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_change_languages.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200406: Measure Corner Profile with VTube-LASER and FARO Quantum====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure a corner profile shape with the Corner Profile measure process using a FARO Quantum arm.<br />
<br />
<td width=200><br />
[[image:20200406_cornerprofile_faro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/404834117 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/404834117/b97d3500e3 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200406_vtl3_cornerprofile_faro_quantum.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar.<br />
<br />
<td width=200><br />
[[image:20200331_training_hexagon_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402756704 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402756704/45b8f394d8 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl3_verify_hexagon_with_cyl_length_bar.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200327: VTube UNIVERSITY Training Video: Introduction to Import and Measuring Tube Shape Demo Tube 5 with a FARO Arm====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to accompany training document 20200327..002" [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:20200327_trainingdoc002_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402035686 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402035686/bdbb6da5fe Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_Intro_To_Import_And_Measure_VTube-LASER_with_FARO_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200323: VTube UNIVERSITY Training Video: FARO Account Manager Demo Training====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to demonstrate VTube-LASER using a FARO ScanArm.<br><br><br />
This video is a supplement to the demo training document available on [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:vtl_v3.0_training_faro_demonstration.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399899513 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/399899513/aa54eece37 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_demonstrating_vtube-laser_with_faro_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200320: VTube UNIVERSITY Training Video: End Scans====<br />
(HEXAGON RA8-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_training_endscan_technique.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399358340 Vimeo]<br />
* View [https://youtu.be/qb9G15eQGpk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200320_VTubeUniversity_vtl_v3_endscan_technique_rev2.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200306: VTube-LASER Correction of an OMCG Wire Bender====<br />
(HEXAGON RA7-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a corrections loop between VTube-LASER and an OMCG wire bender.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_correct_OMCG.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://youtu.be/xFtyRToRwFY YouTube]<br />
* View [https://vimeo.com/396590418 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200306_VTube-LASER_to_OMCG_Corrections_at_Ohio_Precision_Products.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
You can manually setup the Ethernet port following the steps in this short video.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_setupethnernetHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20200225_vtl_v3_Windows10_Ethernet_Setup_For_HEXAGON_RDS.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Switching from probe to laser is easy with the three-way toggle button.<br />
<br />
(Using a HEXAGON RA8 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_switchingprobesHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389798661 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200206_vtl_v3.0_how%20to%20switch%20from%20ball%20to%20laser%20in%20HEXAGON%20RS8%20Arms.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.21===<br />
<br />
====Video 20200204: How to Measure a Bend Radius with Bend Profile Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Bend Profile measure process to measure a bend radius.<br />
<br />
(Using a FARO Quantum ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.21_bendprofilescan_faroquantum.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389291065 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_bendprofilescan_faroquantum.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE. <br />
<br />
(Using a HEXAGON 8325 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles_002.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/384896663 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.21_cornerprofile_demo_2.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 110: Corner Profile Measure Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER can easily measure corner profiles.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/360026684 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 107: Corrections Loop with SOCO Beckhoff Controls====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_soco_beckhoff_communications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/356003359 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_SOCO_SV-M_Protocol.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.20===<br />
<br />
====Video 105: Measuring a Part with 180-Degree Bends====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows VTube-LASER scanning through a part with two 180-degree bends.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.20.video_hvac_dual180.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/345144160 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.20_hvac_dual_split_bend_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.19===<br />
<br />
====Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_different_tube_types_scanned.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332490313 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_quickscan_multiple_part_types.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_timer_accept_button.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332124282 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_accepttimer.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 102: VTube-LASER is Now Compatible with Baces USB Arms====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER working with a Baces USB arm. <br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_baces_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/329690049 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_BacesArmDemo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.18===<br />
<br />
====Video 101: How Automatic Laser Separation for UniScan Makes Scanning Tubes Easier (HEXAGON Arm)====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the Automatic Laser Separation feature introduced in version 2.9.18 on March 15, 2018.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_automatic_laser_separation_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/324467076 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.18_automatic_laser_separation_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_calculate_true_radius_180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.18_measure_180_degree_bend_radius.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_reverse_RZR_side_by_side.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320630910 Vimeo]<br />
* View [https://youtu.be/Qpn8Iyl_RwU YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_reverse_rzr_side_by_side.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 98: About the Small Diameter Warning ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how Small Diameter Warning works along with its setup.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_small_diameter_warning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320355578 Vimeo]<br />
* View [https://youtu.be/uT_PN-lNsz8 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-step/vtube_v2.9.18_minimum_diameter_warning.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 96: VTube-STEP and VTube-LASER New Radius Features ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See the new radius features in this video. In Part Setup:<br />
* Renamed "Radius 1" (renamed from Default Radius)<br />
* New "Radius 2" field<br />
* New "Radius 3" field<br />
<br><br />
In Parametric Tube grid windows:<br><br />
* See how to quickly set the radii for all bends using the synchronize radius feature.<br />
<br />
</td><br />
<td width=200><br />
[[image:vtube_v2.9.18.video_newradius_features.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/317137310 Vimeo]<br />
* View [https://youtu.be/DN_bhnMWCPI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.18_new_syncradlevels.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.17===<br />
<br />
====Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer ====<br />
<br />
Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.18.video_RbSABendPro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/315983373 Vimeo]<br />
* View [https://youtu.be/RLCXQt34Alw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_bendpro_communications.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_hexagon_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309191006 Vimeo]<br />
* View [https://youtu.be/kRwrjV9AqZA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_hexagon_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 93: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the FARO QUANTUM SCANARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_faro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309031852 Vimeo]<br />
* View [https://youtu.be/mt3Wn30EQIs YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_faro_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 92: Measuring part "VTube-LASER Demo 5" with MicroScribe in Version 2.9.17 ====<br />
<br />
This video shows how to measure demo part 5 with version 2.9.17 of VTube-LASER. (Released in December 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_microscribe_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/308642989 Vimeo]<br />
* View [https://youtu.be/_aZg3KpVDis YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.17_microscribe_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 91: How To Reverse-Engineer to STEP file with a FARO ScanArm Using VTube-LASER ====<br />
<br />
This video shows how to reverse-engineer a tube to STEP file. Michael Cone is using VTube-LASER 2.9.17 and a FARO Quantum S ScanArm.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_reverse_faro.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/301420583 Vimeo]<br />
* View [https://youtu.be/N9CcloLF-jQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_reverse-engineer-to-STEP.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.16===<br />
<br />
====Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER ====<br />
<br />
This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.16._attach_and_use_RA8_scanner.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/298226309 Vimeo]<br />
* View [https://youtu.be/GQnAAGLJ-Sc YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.16_ROMER8_HowToAttachAndUseScanner.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.14===<br />
<br />
<br />
====Video 89: MEASURING SMALL TUBES with MICROSCRIBE ====<br />
<br />
<table width=600><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to measure small tubes with the MicroScribe i arm using VTube-LASER.</td><br />
<td width=200><br />
[[image:VTL MicroScribe Video 4.png|300px]]<br><br />
</td><br />
<td width=200><br />
* View on [https://vimeo.com/288409692 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.14_microscribe_dual_split_bend_0.1875.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br />
<br />
===Version 2.9.12===<br />
<br />
====Video 88: VTube-LASER and VTube-STEP Unlimited NOTE LIST Feature ====<br />
<br />
This video shows the new unlimited NOTE LIST feature that allows you to add any number of notes to a VTube project.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.12_notelist_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/285420883 Vimeo]<br />
* View [https://youtu.be/N5kGhWQjFHA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.12_noteslist_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.11===<br />
<br />
====Video 87: VTube-LASER's IMPROVED SQUARE TUBE SCANNING (FARO) ====<br />
<br />
This video shows the improved square-tube scanning feature in version 2.9.11 using a FARO ScanArm.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.11_squaretubescanningfaro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/279182056 Vimeo]<br />
* View [https://youtu.be/0viGl_CnzlM YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.11_scanning_square_tube_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.10===<br />
<br />
====Video 86: VTube-LASER's LASER SCAN FILTER SOUND ====<br />
<br />
This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.10._laserscanfilter_sound.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/278343562 Vimeo]<br />
* View [https://youtu.be/lAmLVzMHatw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_romer_laserscanfilter_sound.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 85: Using VTube-LASER to Supply SOLIDWORKS with Data for Parametric Overlay ====<br />
<br />
This video shows a workflow that allows you to reverse-engineer a Y-pipe sample into SOLIDWORKS. The workflow uses a parametrically-controlled template file in SOLIDWORKS that was created to overlay the scanned-in data for an approximate match. This is an advanced topic for SOLIDWORKS users that concentrates mainly on how it is possible to handle parametric control inside SOLIDWORKS with the help of VTube-LASER scanning.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_reverse-engineering_Y_pipe_parametric_overlay_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER.v2.9.10_ReverseEngineeringToAParametricPart.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 84: Measuring Convoluted Tube and Wire with VTube-LASER ====<br />
<br />
This video shows VTube-LASER's ability to measure extremely convoluted parts. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_convoluted_tube_and_wire_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/277725088 Vimeo]<br />
* View on [https://youtu.be/ZkZm3bFHzog YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_convoluted_tube_wire_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.9===<br />
<br />
<br />
====Video 83: How to Use VTube-STEP and VTube-LASER to Setup and Correct a UNISON Bender ====<br />
<br />
This video shows how to use VTube to setup and correct a Unison bender from model through finished part.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vvtl_2.9.9_setup and correct a unison bender video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/276530203 Vimeo]<br />
* View on [https://youtu.be/4cDtx3Zgzwk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.9_correcting_unison_benders.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.8===<br />
<br />
<br />
====Video 82: Using MTA x 3 To Measure Highly Deformed Exhaust Pipes ====<br />
<br />
This video shows using a three-measure MTA (Measured Tube Average) feature to reduce the deviations due to deformation by 50% in a highly deformed exhaust pipe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.8_mta3_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/271371983 Vimeo]<br />
* View on [https://youtu.be/CWAWzvPRISI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.8_mta3_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 81: SOCO Bender Correction ====<br />
<br />
This video was taken at the TFS open house in Elkhart, Indiana in May, 2018. It shows an actual bender correction and its result after one correction.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.8_sococorrection.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/269557993 Vimeo]<br />
* View on [https://youtu.be/c_txfQvZuX4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_2.9.8_SOCO_Corrections_Loop.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
<br />
<br />
====Video 80: TRAX Rail Arm Extender ====<br />
<br />
This video shows a quick intro to the TRAX Rail system that extend the reach of a measuring center either 1800mm or 3500mm depending on the model.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-TRAX_Video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/268826288 Vimeo]<br />
* View on [https://youtu.be/DVn_2V5PnXo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/AdvancedTubularTrax_VTube-LASER_1800_ROMER.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.7===<br />
<br />
====Video 79: EXPORT REPORTS to EXTERNAL NETWORK LOCATIONS ====<br />
<br />
This video demonstrates how to export a report to an external network location.<br><br><br />
This allows anyone with access to the network path to view VTube-LASER reports in a web browser.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-V2.9.7_ExportHTMLReportToPath.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.7_exportreports.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.4===<br />
<br />
====Video 78: VTube-LASER Corrects an SMT Bender ====<br />
<br />
This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.4_smtcorrection_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/256176430 Vimeo]<br />
* View on [https://youtu.be/YUwPGsUeiP4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl%20smtvideo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.3===<br />
<br />
====Video 77: Build Entire Assemblies to SOLIDWORKS ====<br />
<br />
This video demonstrates how this version of VTube-LASER can build entire assemblies to SOLIDWORKS for you in less than a minute with the press of a couple of buttons.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_swassembly_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/253353260 Vimeo]<br />
* View on [https://youtu.be/SdGz11P5uGQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_sw_assemblies.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 76: Use the Measured Tube Averaging (MTA) Feature for Super Accurate Measurements ====<br />
<br />
This video demonstrates how the MTA feature can measure both sides of the same tube to create a measured tube average for more reliable tube shape calculation.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' ROMER Absolute Arm 7325SI<br><br><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252767821 Vimeo]<br />
* View on [https://youtu.be/cJ8ts3QflKo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' FARO Quantum S ScanArm<br><br></td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252786153 Vimeo]<br />
* View on [https://youtu.be/w9IgI0G-gUo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Other Pages===<br />
<br />
* See [[Retired VTube-LASER Videos]]<br />
* Back to [[VTube-LASER]]</div>Mconehttp://www.advancedtubular.wiki/index.php/File:Vtl_v4_TipsForEndStraightScanning.pngFile:Vtl v4 TipsForEndStraightScanning.png2023-02-24T18:46:11Z<p>Mcone: </p>
<hr />
<div></div>Mconehttp://www.advancedtubular.wiki/index.php/VTube-LASER_VideosVTube-LASER Videos2023-02-24T18:45:54Z<p>Mcone: /* Version 4 */</p>
<hr />
<div><table><br />
<tr cellpadding=10><br />
<td width=300><br />
<br />
See a complete list of VTube-LASER videos on this page.<br><br><br />
<br />
* Back to [http://www.advancedtubular.com/vtube-laser.htm the Main VTube-LASER] web page<br><br><br />
* Back to [[VTube-LASER]] Knowledgebase Page<br><br><br />
* Note: VTube-STEP is included with every VTube-LASER installation. You can watch '''VTube-STEP videos''' in the [[VTube-STEP Videos]] page.<br><br><br />
* See [[Retired VTube-LASER Videos]]<br />
</td><br />
<td width=300><br />
[[image:vtube-laser_videos.png|400px]]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
__NOTOC__<br />
<br />
==Video Subpages Related to Specific Arms==<br />
Click on the images to enter the video subpages with videos for specific arms.<br><br><br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTube-LASER_Videos_HEXAGON_ROMER.png|200px|link=VTube-LASER Videos for HEXAGON ROMER]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:vtube-laser_video_FARO.png|200px|link=VTube-LASER Videos for FARO|]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos Kreon.png|200px|link=VTube-LASER Videos for Kreon]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
[[image:VTL Videos MicroScribe.png|200px|link=VTube-LASER Videos for MicroScribe]]<br />
[[image:vertical grey divider bar.png|5px]]<br />
<br><br><br><br><br />
<br />
==Latest Videos==<br />
<br />
===Version 4===<br />
<br />
<br />
====Video 20230224: Important Tips for End-Straight/End Scanning ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone, the lead developer for VTube-LASER shows how to get reliable end point locations from proper end straight scanning techniques.<br />
<td width=200><br />
[[image:vtl_v4_TipsForEndStraightScanning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230224_ImportantTipsForEndStraightScanning.mp4 MP4]<br />
* View video [https://vimeo.com/796424925 Vimeo]<br />
* View video [https://youtu.be/CLcExwN-pTA YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20230206: How to learn, test, and use the DCP (Diameter Cut Plane) to measure tube straights that are near other objects ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to learn, test, and use the DCP feature to measure tubes that run near other objects.<br />
<td width=200><br />
[[image:vtl_v4_DCPTutorial.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230206_DiameterCutPlaneTutorial.mp4 MP4]<br />
* View video [https://vimeo.com/796424925 Vimeo]<br />
* View video [https://youtu.be/CLcExwN-pTA YouTube]<br />
<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230112: How to Export to Microsoft Excel from VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the different ways to export from VTube-STEP and VTube-LASER to Microsoft Excel.<br />
<td width=200><br />
[[image:vtl_v4_MicrosoftExcelVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230112_ExportingToExcel_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/789311957 Vimeo]<br />
* View video [https://youtu.be/noSSut2RMYg YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20230106: Easy Fine-tuning for Bender Corrections with Correction Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to quickly reduce bender adjustments using Correction Percentage.<br />
<td width=200><br />
[[image:vtl_v4_CorrectionPercentageVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20230106_VTube-LASER_v4_CorrectionPercentage.mp4 MP4]<br />
* View video [https://vimeo.com/787736630 Vimeo]<br />
* View video [https://youtu.be/deLKsd3LDU4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20221006: GD&T Perpendicularity Tutorial for End Trim Profile Measure Process====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the End Trim Profile measure process to calculate GD&T perpendicularity.<br />
<td width=200><br />
[[image:vtl_v4_EndTrimProfileMeasureVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20221005_EndTrimProfile_Tutorial.mp4 MP4]<br />
* View video [https://vimeo.com/757282746 Vimeo]<br />
* View video [https://youtu.be/kQKgeSerbz8 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220927: Measuring a Can-Am Maverick Radius Rod with VTube-LASER Space Objects====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Calvin Nichoson (VTube-LASER Technician) measuring a Can-Am Maverick radius rod with VTube-LASER version 4 Space Objects.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_Can-Am.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220926_VTL_Can-AmMaverickX3LowerRadiusRod_Measure.mp4 MP4]<br />
* View video [https://vimeo.com/754344224 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220912: Sneak Peek Preview - Space Objects Feature in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Space Object feature coming in version 4 of VTube-LASER.<br />
<td width=200><br />
[[image:vtl_v4_SpaceObjectVideo_v2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View video [https://www.advancedtubular.com/vtube-laser/20220912_SneakPeekPreviewSpaceObjects.mp4 MP4]<br />
* View video [https://vimeo.com/749197784 Vimeo]<br />
* View video [https://youtu.be/B1lRp6P4wl4 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220908: Sneak Peek Preview - Shallow Bend Logic in Version 4====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a sneak peek of the new Shallow Bend logic coming in version 4 of VTube-LASER which increases bend point location placement by up to 10 times.<br />
<td width=200><br />
[[image:vtl_v4_ShallowBendVideo_v2c.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220906_VTube-LASER_v4_ShallowBendMeasureLogic.mp4 MP4]<br />
* View Video [https://vimeo.com/747812907 Vimeo]<br />
* View Video [https://youtu.be/ZosWxq4A4NU YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.2===<br />
<br />
====Video 20220823: Automatic Global Configuration Backup File Location====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube making automatic backups of the Global Configuration file.<br />
<br><br><br />
The backup files ensure that you never lose the configuration of the global configuration file. If the configuration is lost, then it can be easily recovered with these files.<br />
<td width=200><br />
[[image:vtl_videoimage_backupglobalconfig.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220823_VTube_Global_Config_Backup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220819: Overview of VTube-LASER to COMCO Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows an overview of communications to the COMCO benders using VTube-LASER<br />
<td width=200><br />
[[image:vtl_videoimage_comcooverview.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View Video [https://www.advancedtubular.com/vtube-laser/20220819_COMCO_Bender_Corrections_In_VTube-LASER.mp4 MP4]<br />
* See PDF [https://www.advancedtubular.com/vtube-laser/20210817-How_To_Export_CSV_from_COMCO.pdf How to Export CSV from COMCO] <br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220629: How Set Up to Correct SMI Benders with VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows set up VTube-LASER to correct SMI benders.<br />
<td width=200><br />
[[image:vtl_v3.2_SMIBenderCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220629_VTube-LASER_SMI_Corrections.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220603: How To Measure Square and Rectangular Tubing with VTube-LASER and a FARO ScanArm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how use a FARO Quantum ScanArm to measure square or rectangular tubing.<br />
<td width=200><br />
[[image:vtl_v3.2_FaroSquareTubingVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220603_vtl3.2_SquareTube_FARO.mp4 MP4]<br />
* View [https://vimeo.com/716899246 Vimeo] <br />
* View [https://youtu.be/rhohh9X3bU0 YouTube]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220513: How To Measure Square Tube with VTube-LASER Using a HEXAGON Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models, measure them, correct tube benders to adjust the shape, and then qualify square tube shapes using VTube-LASER Corner Profile measure process.<br />
<td width=200><br />
[[image:vtl_v3.2b755_SquareTubeVideo_Hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220513_VTube-LASER_MeasureSquare_HEXAGON_ScanArm.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br><br />
<br />
====Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.<br />
<td width=200><br />
[[image:vtl_v3.2b750_CNCBenderBenderlinkVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220421_VTube-LASER_to_CNC_Bender_Communications_Setup.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220420: Measuring 180-degree Bends with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure 180-degree bends with the Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b750_Kreon180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220420_vtl_Kreon_180-Degree_Bends_rev2.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220413: Square Tube Measuring with Kreon Scan Arms====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows square tube measuring using a Kreon scan arm.<br />
<td width=200><br />
[[image:vtl_v3.2b744_KreonSquareTube.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220413_vtl_v3.2_kreon_square_tube.mp4 MP4]<br />
* View [https://vimeo.com/699270748 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220331: Improved Best Fit For Shallow Bends====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how this version of VTube-LASER has an improved Best Fit algorithm designed to handle tubes with shallow bends.<br />
<td width=200><br />
[[image:vtl_v3.2b714_BestFitShallowBend.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20220331_v3.2_b714_BestFitShallowBendLogic.mp4 MP4]<br />
* View [https://vimeo.com/694643426 Vimeo]<br />
</td><br />
</tr><br />
</table><br />
<br />
===Version 3.1===<br />
====Video 20220221-C: Aligning the Kreon Scanner in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to align the Kreon scanner to the Kreon arm in VTube-LASER before you start using the Kreon arm the first time.<br />
<br />
<td width=200><br />
[[image:kreon_video3.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_scanner_positioning_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
<br />
====Video 20220221-B: Controlling the Kreon Video Settings Properly ====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter and control the values in the Kreon Video Settings window.<br />
<br />
<td width=200><br />
[[image:kreon_video4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_video_setup_tutorial.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br />
====Video 20220221: Verifying VTube-LASER and Kreon with a Test Cylinder====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to set up and use a test cylinder to verify your measuring system at the beginning of each day.<br />
<br />
<td width=200><br />
[[image:kreon_video2.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_b692_kreon_test_cylinder_setup.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
<br />
====Video 20220216: VTube-LASER Using a Kreon Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the connection to a Kreon ACES scan arm with a Solano blue line scanner.<br />
<br />
<td width=200><br />
[[image:kreon_video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v3.1_kreon_intro.mp4 MP4]<br />
* View [https://vimeo.com/678223398 Vimeo]<br />
* View [https://youtu.be/6o7W38-q1lU YouTube]<br />
<br />
<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to calculate tube elongation percentage with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20220113_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_training%20video%2015%20-%20How%20to%20Calculate%20the%20Tube%20Elongation%20Percentage.mp4 MP4]<br />
* View [https://vimeo.com/665826780 Vimeo]<br />
* View [https://youtu.be/a0bc6IpbWb0 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20211207: VTube-LASER Correction for Han Jie Benders====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638)<br />
<br />
<td width=200><br />
[[image:20211207_VTube-LASER_to_HanJie_Video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER_HanJie_Promotional.mp4 MP4]<br />
* View [https://vimeo.com/654364120 Vimeo]<br />
* View [https://youtu.be/ym8LbFUpyow YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
===Version 3.0===<br />
<br />
====Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)<br />
<br />
<td width=200><br />
[[image:20210702_TangentPointEntryGrid.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_b555_tangent_point_entry_grid.mp4 MP4]<br />
* View [https://vimeo.com/571874446 Vimeo]<br />
* View [https://youtu.be/C9yLbhoWlSE YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br />
====Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021)<br />
<br />
<td width=200><br />
[[image:20210622_End_Scan_Flier_Filter_Promo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_endscanflierfilter_promo.mp4 MP4]<br />
* View [https://vimeo.com/567104555 Vimeo]<br />
* View [https://youtu.be/RfWxFa6fEFk YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210505: How To Determine Positive and Negative Rotation Directions====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube.<br />
<br />
<td width=200><br />
[[image:20210505_Positive_Rotation_Direction.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_positive_rotation_direction.mp4 MP4]<br />
* View [https://vimeo.com/545519786 Vimeo]<br />
* View [https://youtu.be/CL7L-rZbVDQ YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210503: Automatic Reverse Calc====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513.<br />
<br />
<td width=200><br />
[[image:20210503_AutomaticReverseCalcVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vt_v3_b513_automatic_reverse_calc.mp4 MP4]<br />
* View [https://vimeo.com/545518519 Vimeo]<br />
* View [https://youtu.be/-rh5eNA8tIA YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210421: Why and How to Use MTA (Measured Tube Averaging)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows the why and how of MTA.<br />
<br />
<td width=200><br />
[[image:20210421_MTAVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_mta_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/541156704 Vimeo]<br />
* View [https://youtu.be/gGSAR-a6m3Q YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100413: VTube v3 NPS Values Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how to use the new NPS values in VTube.<br />
<br />
<td width=200><br />
[[image:20210413_NPSVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_nps_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/536497747 Vimeo]<br />
* View [https://youtu.be/RcKawANCpWY YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 202100406: VTube-LASER Reverse Engineering Tutorial====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210406_ReverseEngineeringVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_reverse_engineering_tutorial.mp4 MP4]<br />
* View [https://vimeo.com/533692712 Vimeo]<br />
* View [https://youtu.be/7N_-0d_Mjp4 YouTube]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210330: VTube-LASER to Transfluid Bender Communications====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to communicate with Transfluid tProject bender software.<br />
<br />
<td width=200><br />
[[image:20210330_TransfluidTProjectCommunications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_transfluid_tproject_communications.mp4 MP4]<br />
* View [https://vimeo.com/531073455 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210313: How to Enter Bender Data of Different Types in the Same Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data.<br />
<br />
<td width=200><br />
[[image:20210313_ImportMixedBenderData.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_entering_mixed_bender_data_types.mp4 MP4]<br />
* View [https://vimeo.com/523279713 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20210310: How to Import New Report Templates====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import new report templates into VTube-STEP and VTube-LASER.<br />
<br />
<td width=200><br />
[[image:20210310_ImportReportTemplates.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_importingreporttemplates.mp4 MP4]<br />
* View [https://vimeo.com/522027683 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20210212: Switch the FARO Scanner ON and OFF Manually====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Use this process to quickly switch the FARO scanner on or off manually.<br />
<br />
<td width=200><br />
[[image:20210212_FARO_Scanner_ONOFF.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_20210212_FARO_Scanner_Laser_On_Off.mp4 MP4]<br />
* View [https://vimeo.com/511726559 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes.<br />
<br />
<td width=200><br />
[[image:20201221_UTESelectCorrectionVideo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_UTE_Select_Corrections_Hexagon.mp4 MP4]<br />
* View [https://vimeo.com/493550553 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201117: Calculate Centerline Radii Using Measure Bend Profile (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Quickly and accurately measure the centerline radius using the Measure Bend Profile process.<br />
<br />
<td width=200><br />
[[image:20201117_measurebendprofile_bendradii.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_bend_profile_scan_for_radius_faro.mp4 MP4]<br />
* View [https://vimeo.com/480569055 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights.<br />
<br />
<td width=200><br />
[[image:20201111B_autocopydefaulttolerance.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_automatic_copy_of_default_tolerance.mp4 MP4]<br />
* View [https://vimeo.com/478271550 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges.<br />
<br />
<td width=200><br />
[[image:20201111_precisionweightcontrolalignment.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_precision_weight_control_alignment.mp4 MP4]<br />
* View [https://vimeo.com/478127038 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm.<br />
<br />
<td width=200><br />
[[image:20200930_measuring_od_end_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_qualifying_endscan_profiles_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/463607514 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports_hexagon.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_hexagon.mp4 MP4]<br />
* View [https://vimeo.com/461988796 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200923: How to Measure and Qualify Ports on a Tube Using Assembly (FARO)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes.<br />
<br />
<td width=200><br />
[[image:20200923_measureing_tubes_with_ports.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_faro.mp4 MP4]<br />
* View [https://vimeo.com/461239022 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200804: Measuring a Brake Line with a FARO EDGE Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER measuring a brake line with a legacy FARO Edge Scan Arm.<br />
<br />
<td width=200><br />
[[image:2020804_Brake_Line_FAROEdge.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_faro_edge_brake_line.mp4 MP4]<br />
* View [https://vimeo.com/444720352 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner.<br />
<br />
<td width=200><br />
[[image:20200722_RA7520_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/440788274 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_ra-7520_SI_ScanningTube.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200709: Real-time Overall Scan Scores Build Confidence (HEXAGON RA8)====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how VTube-LASER scan scoring system helps users know they are measuring well.<br />
<br />
<td width=200><br />
[[image:20200709_scanscore_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_realtime_scanscore.mp4 MP4]<br />
* View [https://vimeo.com/437000592 Vimeo]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200609: How to Use Multiple Versions of the Same Part in One Project====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use Assembly to create multiple versions of the same part in one project. Each version can then be used to measure the part at various stages of the fabrication process.<br />
<br />
<td width=200><br />
[[image:20200609_multiple_versions_parts_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_multiple_versions_of_same_part.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
====Video 20200515: How Import 180-degree Bend Models====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to import models with 180-degree bends.<br />
<br />
<td width=200><br />
[[image:20200515_import180_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_import_180-degree_bend_models.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 20200514: How to Change Languages in VTube====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to change languages in the VTube-LASER and VTube-STEP user interface.<br />
<br />
<td width=200><br />
[[image:20200514_changelanguges_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_change_languages.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200406: Measure Corner Profile with VTube-LASER and FARO Quantum====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to measure a corner profile shape with the Corner Profile measure process using a FARO Quantum arm.<br />
<br />
<td width=200><br />
[[image:20200406_cornerprofile_faro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/404834117 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/404834117/b97d3500e3 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200406_vtl3_cornerprofile_faro_quantum.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar====<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar.<br />
<br />
<td width=200><br />
[[image:20200331_training_hexagon_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402756704 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402756704/45b8f394d8 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl3_verify_hexagon_with_cyl_length_bar.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200327: VTube UNIVERSITY Training Video: Introduction to Import and Measuring Tube Shape Demo Tube 5 with a FARO Arm====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to accompany training document 20200327..002" [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:20200327_trainingdoc002_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/402035686 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/402035686/bdbb6da5fe Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_Intro_To_Import_And_Measure_VTube-LASER_with_FARO_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200323: VTube UNIVERSITY Training Video: FARO Account Manager Demo Training====<br />
(FARO QUANTUM S ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to demonstrate VTube-LASER using a FARO ScanArm.<br><br><br />
This video is a supplement to the demo training document available on [https://www.advancedtubularsupport.com/vtube-laser-faro-docs.html this support page].<br />
<br />
<td width=200><br />
[[image:vtl_v3.0_training_faro_demonstration.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399899513 Vimeo]<br />
* Download [https://vimeo.com/advancedtubular/download/399899513/aa54eece37 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_demonstrating_vtube-laser_with_faro_and_demo_tube_5.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200320: VTube UNIVERSITY Training Video: End Scans====<br />
(HEXAGON RA8-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_training_endscan_technique.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/399358340 Vimeo]<br />
* View [https://youtu.be/qb9G15eQGpk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200320_VTubeUniversity_vtl_v3_endscan_technique_rev2.mp4 MP4]<br />
<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200306: VTube-LASER Correction of an OMCG Wire Bender====<br />
(HEXAGON RA7-7 ScanArm)<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows a corrections loop between VTube-LASER and an OMCG wire bender.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_correct_OMCG.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://youtu.be/xFtyRToRwFY YouTube]<br />
* View [https://vimeo.com/396590418 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200306_VTube-LASER_to_OMCG_Corrections_at_Ohio_Precision_Products.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
You can manually setup the Ethernet port following the steps in this short video.<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_setupethnernetHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/20200225_vtl_v3_Windows10_Ethernet_Setup_For_HEXAGON_RDS.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
Switching from probe to laser is easy with the three-way toggle button.<br />
<br />
(Using a HEXAGON RA8 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v3.0_switchingprobesHEXAGON.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389798661 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/20200206_vtl_v3.0_how%20to%20switch%20from%20ball%20to%20laser%20in%20HEXAGON%20RS8%20Arms.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.21===<br />
<br />
====Video 20200204: How to Measure a Bend Radius with Bend Profile Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Bend Profile measure process to measure a bend radius.<br />
<br />
(Using a FARO Quantum ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.21_bendprofilescan_faroquantum.mp4.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/389291065 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_bendprofilescan_faroquantum.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE. <br />
<br />
(Using a HEXAGON 8325 ScanArm)<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles_002.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/384896663 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.21_cornerprofile_demo_2.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 110: Corner Profile Measure Process====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER can easily measure corner profiles.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_corner_profiles.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/360026684 Vimeo]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 107: Corrections Loop with SOCO Beckhoff Controls====<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.21.video_soco_beckhoff_communications.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/356003359 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_SOCO_SV-M_Protocol.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.20===<br />
<br />
====Video 105: Measuring a Part with 180-Degree Bends====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows VTube-LASER scanning through a part with two 180-degree bends.<br />
</td><br />
<td width=200><br />
[[image:vtubelaser_v2.9.20.video_hvac_dual180.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/345144160 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.20_hvac_dual_split_bend_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.19===<br />
<br />
====Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_different_tube_types_scanned.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332490313 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_quickscan_multiple_part_types.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_timer_accept_button.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/332124282 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_accepttimer.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 102: VTube-LASER is Now Compatible with Baces USB Arms====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows VTube-LASER working with a Baces USB arm. <br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.19.video_baces_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.vimeo.com/329690049 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_BacesArmDemo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.18===<br />
<br />
====Video 101: How Automatic Laser Separation for UniScan Makes Scanning Tubes Easier (HEXAGON Arm)====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows the Automatic Laser Separation feature introduced in version 2.9.18 on March 15, 2018.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_automatic_laser_separation_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/324467076 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.18_automatic_laser_separation_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_calculate_true_radius_180-degree.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.18_measure_180_degree_bend_radius.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_reverse_RZR_side_by_side.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320630910 Vimeo]<br />
* View [https://youtu.be/Qpn8Iyl_RwU YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_reverse_rzr_side_by_side.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 98: About the Small Diameter Warning ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
This video shows how Small Diameter Warning works along with its setup.<br />
</td><br />
<td width=200><br />
[[image:vtubestep_v2.9.18.video_small_diameter_warning.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/320355578 Vimeo]<br />
* View [https://youtu.be/uT_PN-lNsz8 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-step/vtube_v2.9.18_minimum_diameter_warning.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
<br />
====Video 96: VTube-STEP and VTube-LASER New Radius Features ====<br />
<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
See the new radius features in this video. In Part Setup:<br />
* Renamed "Radius 1" (renamed from Default Radius)<br />
* New "Radius 2" field<br />
* New "Radius 3" field<br />
<br><br />
In Parametric Tube grid windows:<br><br />
* See how to quickly set the radii for all bends using the synchronize radius feature.<br />
<br />
</td><br />
<td width=200><br />
[[image:vtube_v2.9.18.video_newradius_features.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/317137310 Vimeo]<br />
* View [https://youtu.be/DN_bhnMWCPI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.18_new_syncradlevels.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.17===<br />
<br />
====Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer ====<br />
<br />
Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.18.video_RbSABendPro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/315983373 Vimeo]<br />
* View [https://youtu.be/RLCXQt34Alw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_bendpro_communications.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_hexagon_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309191006 Vimeo]<br />
* View [https://youtu.be/kRwrjV9AqZA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_hexagon_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
<br />
====Video 93: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the FARO QUANTUM SCANARM ====<br />
<br />
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_newfeatures_faro_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/309031852 Vimeo]<br />
* View [https://youtu.be/mt3Wn30EQIs YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_faro_major_new_features.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 92: Measuring part "VTube-LASER Demo 5" with MicroScribe in Version 2.9.17 ====<br />
<br />
This video shows how to measure demo part 5 with version 2.9.17 of VTube-LASER. (Released in December 2018).<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_microscribe_demo.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/308642989 Vimeo]<br />
* View [https://youtu.be/_aZg3KpVDis YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.17_microscribe_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 91: How To Reverse-Engineer to STEP file with a FARO ScanArm Using VTube-LASER ====<br />
<br />
This video shows how to reverse-engineer a tube to STEP file. Michael Cone is using VTube-LASER 2.9.17 and a FARO Quantum S ScanArm.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.17.video_reverse_faro.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/301420583 Vimeo]<br />
* View [https://youtu.be/N9CcloLF-jQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_reverse-engineer-to-STEP.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.16===<br />
<br />
====Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER ====<br />
<br />
This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.16._attach_and_use_RA8_scanner.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/298226309 Vimeo]<br />
* View [https://youtu.be/GQnAAGLJ-Sc YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.16_ROMER8_HowToAttachAndUseScanner.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.14===<br />
<br />
<br />
====Video 89: MEASURING SMALL TUBES with MICROSCRIBE ====<br />
<br />
<table width=600><br />
<tr><br />
<td width=300><br />
This video shows how easy it is to measure small tubes with the MicroScribe i arm using VTube-LASER.</td><br />
<td width=200><br />
[[image:VTL MicroScribe Video 4.png|300px]]<br><br />
</td><br />
<td width=200><br />
* View on [https://vimeo.com/288409692 Vimeo]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.14_microscribe_dual_split_bend_0.1875.mp4 MP4]<br />
</td><br />
</tr><br />
</table><br />
<br><br />
<br />
===Version 2.9.12===<br />
<br />
====Video 88: VTube-LASER and VTube-STEP Unlimited NOTE LIST Feature ====<br />
<br />
This video shows the new unlimited NOTE LIST feature that allows you to add any number of notes to a VTube project.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.12_notelist_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/285420883 Vimeo]<br />
* View [https://youtu.be/N5kGhWQjFHA YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.12_noteslist_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.11===<br />
<br />
====Video 87: VTube-LASER's IMPROVED SQUARE TUBE SCANNING (FARO) ====<br />
<br />
This video shows the improved square-tube scanning feature in version 2.9.11 using a FARO ScanArm.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.11_squaretubescanningfaro_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/279182056 Vimeo]<br />
* View [https://youtu.be/0viGl_CnzlM YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.11_scanning_square_tube_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
===Version 2.9.10===<br />
<br />
====Video 86: VTube-LASER's LASER SCAN FILTER SOUND ====<br />
<br />
This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.10._laserscanfilter_sound.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://vimeo.com/278343562 Vimeo]<br />
* View [https://youtu.be/lAmLVzMHatw YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_romer_laserscanfilter_sound.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br><br />
<br />
====Video 85: Using VTube-LASER to Supply SOLIDWORKS with Data for Parametric Overlay ====<br />
<br />
This video shows a workflow that allows you to reverse-engineer a Y-pipe sample into SOLIDWORKS. The workflow uses a parametrically-controlled template file in SOLIDWORKS that was created to overlay the scanned-in data for an approximate match. This is an advanced topic for SOLIDWORKS users that concentrates mainly on how it is possible to handle parametric control inside SOLIDWORKS with the help of VTube-LASER scanning.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_reverse-engineering_Y_pipe_parametric_overlay_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER.v2.9.10_ReverseEngineeringToAParametricPart.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 84: Measuring Convoluted Tube and Wire with VTube-LASER ====<br />
<br />
This video shows VTube-LASER's ability to measure extremely convoluted parts. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_2.9.10_convoluted_tube_and_wire_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/277725088 Vimeo]<br />
* View on [https://youtu.be/ZkZm3bFHzog YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_convoluted_tube_wire_demo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.9===<br />
<br />
<br />
====Video 83: How to Use VTube-STEP and VTube-LASER to Setup and Correct a UNISON Bender ====<br />
<br />
This video shows how to use VTube to setup and correct a Unison bender from model through finished part.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vvtl_2.9.9_setup and correct a unison bender video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/276530203 Vimeo]<br />
* View on [https://youtu.be/4cDtx3Zgzwk YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.9_correcting_unison_benders.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.8===<br />
<br />
<br />
====Video 82: Using MTA x 3 To Measure Highly Deformed Exhaust Pipes ====<br />
<br />
This video shows using a three-measure MTA (Measured Tube Average) feature to reduce the deviations due to deformation by 50% in a highly deformed exhaust pipe.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtl_v2.9.8_mta3_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/271371983 Vimeo]<br />
* View on [https://youtu.be/CWAWzvPRISI YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.8_mta3_measure.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 81: SOCO Bender Correction ====<br />
<br />
This video was taken at the TFS open house in Elkhart, Indiana in May, 2018. It shows an actual bender correction and its result after one correction.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.8_sococorrection.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/269557993 Vimeo]<br />
* View on [https://youtu.be/c_txfQvZuX4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_2.9.8_SOCO_Corrections_Loop.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
<br />
<br />
====Video 80: TRAX Rail Arm Extender ====<br />
<br />
This video shows a quick intro to the TRAX Rail system that extend the reach of a measuring center either 1800mm or 3500mm depending on the model.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-TRAX_Video1.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/268826288 Vimeo]<br />
* View on [https://youtu.be/DVn_2V5PnXo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/AdvancedTubularTrax_VTube-LASER_1800_ROMER.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.7===<br />
<br />
====Video 79: EXPORT REPORTS to EXTERNAL NETWORK LOCATIONS ====<br />
<br />
This video demonstrates how to export a report to an external network location.<br><br><br />
This allows anyone with access to the network path to view VTube-LASER reports in a web browser.<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:VTube-LASER-V2.9.7_ExportHTMLReportToPath.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.7_exportreports.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.4===<br />
<br />
====Video 78: VTube-LASER Corrects an SMT Bender ====<br />
<br />
This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.4_smtcorrection_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/256176430 Vimeo]<br />
* View on [https://youtu.be/YUwPGsUeiP4 YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtl%20smtvideo.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Version 2.9.3===<br />
<br />
====Video 77: Build Entire Assemblies to SOLIDWORKS ====<br />
<br />
This video demonstrates how this version of VTube-LASER can build entire assemblies to SOLIDWORKS for you in less than a minute with the press of a couple of buttons.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_swassembly_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/253353260 Vimeo]<br />
* View on [https://youtu.be/SdGz11P5uGQ YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_sw_assemblies.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
====Video 76: Use the Measured Tube Averaging (MTA) Feature for Super Accurate Measurements ====<br />
<br />
This video demonstrates how the MTA feature can measure both sides of the same tube to create a measured tube average for more reliable tube shape calculation.<br />
<br />
<table width=700><br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' ROMER Absolute Arm 7325SI<br><br><br />
</td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252767821 Vimeo]<br />
* View on [https://youtu.be/cJ8ts3QflKo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature_FARO.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
<tr><br />
<td width=300><br />
'''Arm used in this video:''' FARO Quantum S ScanArm<br><br></td><br />
<td width=200><br />
[[image:vtube-laser_v2.9.3_mta_video.png|300px]]<br><br />
</td><br />
<td width=300><br />
* View on [https://vimeo.com/252786153 Vimeo]<br />
* View on [https://youtu.be/w9IgI0G-gUo YouTube]<br />
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.3_MeasuredTubeAverageFeature.mp4 MP4]<br />
</td><br />
</tr><br />
<br />
</table><br />
<br><br />
<br />
===Other Pages===<br />
<br />
* See [[Retired VTube-LASER Videos]]<br />
* Back to [[VTube-LASER]]</div>Mcone